pqi WCS18W 3-In-1 Charging Stand User Manual

June 4, 2024
PQI

pqi WCS18W 3-In-1 Charging Stand

Product Overview

Installation

  1. Plug the power adapter into the socket.
  2. USB cable connect to the power adapter.
  3. Put USB cable connect to the USB-C Interface.
  4. Put the mobile phone which supports wireless charging function on the charging area correctly. The indicator light turns green from blue if it starts to charge. The light will be blue if you remove the mobile phone, which means the wireless charging pad enters standby mode.

Indicating Status and Protection Function

  1. LED Blue Light: Standby
  2. LED Green Light: Charging
  3. LED Blue Light Flashing: Mobile phone location in deviation or overheating protection or trigger FOD.

Important Notes

  1. Please remove the protective case When the device is charging. To keep a high efficiency, we suggest you use a 2A adapter.
  2. Do not disassemble the charger or throw it into fire and water, to avoid causing a short circuit leakage.
  3. Do not use the wireless chargers in severely hot, humid, or corrosive environments, to avoid circuit damage and occurs leakage phenomena.
  4. Do not place stuff with magnetic strips or chips ( ID cards, bank cards, etc.) on the wireless charging pads to avoid magnetic card failure.
  5. Please keep the distance at least 30 cm (1 ft.) between medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
  6. Please take care of the children and ensure they won’t play with the wireless charger as a toy, to avoid unnecessary accidents.
  7. Only QC2.0/ 3.0/ PD standard power adapter can support the fast charging of this product. Adapters are not included, they should be bought separately.

Usage Scenario

Basic Specification

  • Model: wcs1aw

  • Product Name: WCS18W Charging Stand

  • Input: 9.0V-2.0A

  • Output

    • Mobile phone: 5V-1A/7.5V-1A/8.22V-1.12A (10W Max)
    • Earphone: 5V-1A (5W Max)
    • Apple Watch: 5V-0.3A (3W Max)
  • 18W Max: Charging Distance <5mm

  • Wireless Charging Conversion Efficiency >75%

  • Size 76 x 124 x 133 mm: Weight 182g

  • Warranty 1 Year: Made in China

Package Contents

  • Charging Stand x 1
  • User Manual x 1
  • USB-C to USB-C Cable x 1

Support

Address: No.49, Sec. 4, Zhongyang Rd, Tucheng Dist., New Taipei City 23675, Taiwan
Tel: +886-2-2269-9889| www.pqigroup.com I
Facebook: PQI

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals