Shenzhen Ann Guard Technology DU4LW Pet Feeder Instruction Manual
- June 5, 2024
- Shenzhen Ann Guard Technology
Table of Contents
Automatic pet feeder with WIFI
Manual
Please read carefully before using the product
Function introduction
Revolving lamp
Blue light| Flash: Flash twice a second, add WiFi quickly Slow flash: flash
once in 3 seconds, hot spot connection Its always on: Network connection
successful Mode switching: Long on for 6 seconds
---|---
red light| Usually, it’s not bright Limit switch detection abnormal flashing
red light Flash twice when unlocking/locking Mode switching: Long on for 6
seconds
Key operation
Microphone button : press and hold the “drop” sound to start recording,
release the two drops” prompt to stop recording. The maximum recording time is
10 seconds. RESETKey: When the connection mode is switched/reset, press
and hold for 7 seconds to make 3 sounds of “drop, drop, drop”, and the
red/blue indicator light is on for 6 seconds to switch to slow flashing (hot
spot connection mode). After the machine is configured successfully, press and
hold it again to send out “drop, drop, drop” sound, and the red/blue indicator
light will stay on for 6 seconds, and the equipment will return to the factory
settings. FEEDKey: Short press to send out 1 portion of food. Press and hold
for 10 seconds and the red indicator will flash twice, and the machine will be
locked. Press and hold the red indicator light for 10 seconds again to unlock.
In the locked state, press and hold the reset key to restore the factory
settings. Do not press record andFEEDKey.
5V DC power socket
For the external DC 5 V power adapter.
How to dismantle grain storage barrel
The two sides of the grain storage barrel are provided with locking buckles.
Press and hold the locking buckle to lift up the barrel.
horn
The speaker at the bottom is the speaker that plays the food call recording
How to open and close the lid of the rain barrel
The cover of the grain barrel adopts a self-suction design, and the cover can
be put down and pressed tightly.
Bottom battery box
Three No. 1 batteries can be placed as a standby power supply. ( When the
battery is powered, the feeder only retains the automatic feeding function set
by the app, and other functions cannot be used. )
Battery description
1. Use three No.1 alkaline batteries for power supply.2. The positive and
negative electrodes of the battery refer to the positive and negative signs in
the battery compartment.3. When the battery is low, the feeder should be
powered off before replacing it with a new battery.4. The battery must be
removed from the feeder before the feeder is discarded.5. When removing the
battery, the feeder must be powered off.6. According to the relevant national
regulations, please place the waste batteries in the special storage point.7.
If the battery is not used for a long time, please take out the battery. In
case of leakage, please clean the battery compartment immediately and put the
leaking battery in a special storage point
How to install a food tray
There are two connecting holes on the inside of the food plate. Insert the
connecting column at the bottom of the body into the connecting holes
Recording settings
After the feeder is configured, a recording can be added to the feeder. This
recording will be played every time you press the feeding key manually or
automatically to remind the pet that the feeding time is up. The specific
operation is as follows: Press and hold the microphone button and start
recording. After recording, release the button to send out two “didi” prompts
to complete the recording. The recording time is up to 10 seconds. If you are
not satisfied, you can repeat this operation to cover the previous recording.
AP mode configuration (optional)
complete configure according to the diagram in the manual. If the
configuration is not successful, please switch to AP mode for configuration.
The specific operation process is as follows:1. In the mode of waiting for a
connection, the status indicator is flashing rapidly. Press and hold the
“reset” key for 7 seconds to give out three sounds of “drop, drop, drop”.
After letting go, the indicator light will switch to slow flashing, and then
enter AP mode.2. Open the mobile app, select Add Device -Manual add – small
household appliances – pet feeder, select other methods – hot distribution
network in the upper right corner of the interface, fill in the WiFi password
according to the prompt, and then enter the WiFi interface of the mobile phone
to connect to a WiFi signal of smart life XXX.3. After selecting and
connecting the hotspot signal, return to app and wait for the connection to
please.
WiFi intelligent pet feeder
Smart app Specific operation
Download the app and sign in with your exclusive account| After entering the
interface, wait for the device to be discovered automatically and click “add”|
CDInput WiFi password (user name cannot use Chinese, the password can not take
special symbol)| Select Add Device”+”
Waiting to connect to the network.| Add successfully, you can customize the
device name, click finish| In the main interface, you can select the
appropriate number of servings according to your needs and click “feeding” to
feed immediately| Click “feeding plan” in the main interface to add regular
feeding
Click “add share” and enter the app account of the other party to share the device with multiple people| Manter the settings menu and click “shared device”| Sharing device steps: in the main interface, click the icon in the upper right corner to enter the setting options| You can set the time and the number of servings according to your pet’s eating pattern. You can choose from Monday to Sunday every day and click save
Simple troubleshooting of pet feeder
- Please check if you can’t connect: The WiFi name and password should not be in Chinese or more than 12 digits. Please use a combination of numbers and letters. 5g WiFi signal is not supported. Please use a 2.4G WiFi signal.b: For some community broadband, radio and television broadband, multi-level network, or mobile Tietong network, due to network restrictions, the feeder can not connect to the network server, so it is recommended to use Telecom or Unicom Network.c: Some software conflicts in the phone will also cause connection failure. Please restart the phone. Turn off the nonmobile system software that starts with the phone, turn on Bluetooth and location, and then try reconnecting to the feeder.
- If the feeding device is inaccurate or not feeding, please check whether there is too much food on the food plate and Whether the food passage is blocked. Please clean the food outlet and passage. When using the battery power supply, please check whether the battery is dead and whether the battery is leaking liquid.
- The device shows offline. Please check the distance between the device and the router at home. Do not exceed 10 meters. Try not to partition the middle. According to WiFi characteristics, the WiFi signal on the partition wall will drop sharply, resulting in an unstable connection offline.
- If there is no response after starting the machine, check whether the power supply is plugged in and whether the power switch is turned on. If they are all plugged in, please check whether the power supply is damaged, contact customer service to buy the power supply, or return to the factory for maintenance according to the judgment.
Packing list
After opening the product package, please confirm whether the pet feeder is in
good condition, Please check whether the accessories are complete according to
the list. Machine xl, power adapter xlConnecting wire xl, quick operation
guide xl
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: ( I ) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. –
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated at a minimum distance of m the radiator of
your body. This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter
https://smartapp.tuya.com/tuyasmart