MIPRO FB-70 Rear-to-Front Anteena Kit User Guide
- June 5, 2024
- MIPRO
Table of Contents
MIPRO FB-70 Rear-to-Front Anteena Kit
INSTALLATION INSTRUCTION
- To enhance the receiving efficiency, install the antenna onto the FB-70 rear-to-front antenna kit.
- Do use 500 coaxial cables between the receiver and the FB-70 rear-to-front antenna kit, and the cable should be as short as better. For UHF receivers, use the FBC-71 antenna cable; for ISM receivers, use the FBC-72 antenna cable.
- Just install the FB-70 rear-to-front antenna kit onto the front or rear side of the EIA 1 U rack cabinet.
Disposal
Dispose the unusable device according to valid regulations. Disposal of spent batteries/accumulators You are required by law to return all spent batteries. Disposing of used batteries with domestic waste is prohibited!
Batteries I NiCad cells containing toxins are marked by accompanying symbols that refer to the prohibition of disposal of domestic waste. The designations for the decisive heavy metals are
- Cd=cadmium,
- Hg=mercury,
- Pb=lead.
You may return spent batteries/accumulators free of charge to the recycling centers, our outlets, or anywhere elsewhere batteries/accumulators are sold. By doing so, you fulfill the legal requirements and contribute to the conservation of our environment!
MIPRO Electronics Co., Ltd
Headquarters: No. 814, Beigang Rd., Chiayi City 600079, Taiwan
Tel : +886.5.238.0809
www.mipro.com.tw
Fax : +886.5.238.0803