CALMBEE CB-GH200 Wireless Gaming Headset User Guide

CALMBEE CB-GH200 Wireless Gaming Headset

Packing List

Diagram

Power ON/OFF

How to Connect

MIC ON/OFF

• On: Microphone On
• Off: Microphone–one Off

Compatible Device

PC/Mac Wireless Mode

1. Open Sound settings
2. Choose your output device
3. Choose your input device ‘ CB-CH200 •
4. CB-CHZOO wireless haedsat is ready

PS4/PSS Console Wireless Mode

Route: Settings➔ Oevlces➔ Audio De\’lces
Set ‘CB-CH200’ as Input Clevlc:a & Output Device

Audio Devices
PS4
O Input Device USBHeadset(CB-GH200)
0 Output Device USB Headset( CB-GH200)
O Adjust Microphone Level
O Volume Control {Headphones)
O Output to Headphones AIIAudio
O Switch Output Device Automatically ■

PS4/PSS Controller Wired Mode

Xbox Controller Wired Mode

Note: Wireless mode is not available for Xbox.

Bluetooth Devices Wireless Mode

Specifications

• Model: CB-CH200
• Headset battery capacity: lithium battery 1100mAh
• Standby time: about 200H
• Charging time: 3-4H
• Playing time: about 60H
• Input charging standard: USB Type-c.OCSV/IA
• Frequency response: 20Hz -20KHz
• sensitivity: 105±3dB@lKHz
• MIC sensitivity: -38±3dB@lKHz(Unidirectional)
• Wireless Range: Up to 39 feet

2.4GHz Wireless
Tha 2.4GHzconnactlon le available on Windows/ Mac/ PS• I PS5.

Bluetooth Wireless
The Bluetooth connection Is available on Mobile phones/Mac/lPad.

Charging and Working Time

1. Please charge the headset with ‘!N/IA standard adapter or via the USB port of PC:
2. Generally, it takes 4 hours to fully charge the headset, but the actual charging time may vary according to different charging devices,
3. Up to 60 hours of working time (at 70% volume) after fully charged.

Bluetooth disconnect

1. Check to make sure the device is within the Bluetooth range.
2. Check to confirm the Bluetooth is tu med on at your device.

Re-set the wireless connection

With the headset off

1. Long press the power button for Ss
2. Light turns Into blinking.It’s ready to re-pairing

Lifetime Customer Support

Get a full refund within 30 days for any reason.
And 1B-Month is straightforward. hassle-free warranty for replacement to quality problem.
We’ll always be there for you. If you have any questions or concerns .
feel free to contact us at s[email protected].

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wll not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

Shenzhen Hanbo Technology Co.,Ltd
Website: www.calmbee.net
E-mail: [email protected]
Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>