RIFTBOX BT201 Wireless Headphone User Guide
- June 5, 2024
- RIFTBOX
Table of Contents
RIFTBOX BT201 Wireless Headphone User Guide
DISCLAIMER
All content contained in this document is the property of Wildhorn Outfitters@
and is not to be redistributed, reused or reproduced in any way.
PRODUCT FEATURE
- Right main button (power, google/siri, phone answer, pause/play)
- Left control button (volume, music skip orward/skip back)
- Micro usb port/charging port
- Led light
- MIC
- Speaker side indicator R=right, I=left
- Speaker
- Speaker cord
FUNCTION SEQUENCE
TO POWER ON: HOLD FOR 3 SECONDS
-
SINGLE BEEP WILL SOUND
Pairing mode will automatically start-up -
VOICE WILL SOUND indicating battery level
CONNECTING A NEW DEVICE:
After powering on, pairing mode will automatically start-up.
‘READY TO PAIR’ audible voice.
- Select WILDHORN BT201 from smart deice bluetooth menu.
- YOUR DEVICE IS CONNECTED’ will voice once successfully paired
Your Alta headphones will automatically connect to a previously paired device.
IN COMING CALL ANSWER MODE:
- SINGLE BEEP SOUND
- Press Right single button (1) once to answer
IN COMING CALL HANGUP MODE:
- Press Right single button (1) once to Hang-up
- SINGLE BEEP SOUND
ACTIVATE SIRVGOOGLE I OUTGOING CALL:
- Double press Right button (1)
- SINGLE BEEP SOUND
- Siri/Google ready
- Voice command
PAIR A NEW DEVICE/SWITCH DEVICE:
- PRESS MAIN SINGLE BUTTON. HOLD 2 SECONDS ‘READY TO PAIR’
- Your device is ready to connect, Connect new device
- YOUR DEVICE IS CONNECTED’ voice once successfully paired
VOLUME:
- Volume UP Hold down top left button (2A)
- Single beep sound for each volume increase
- Multiple beeps once max sound is achieved
- Volume DOWN Hold down bottom left button (2B).
- Single beep sound for each volume decrease
MUSIC SKIP:
- MUSIC SKIP FORWARD Press top left button (2A) once
- SINGLE BEEP SOUND
- Music will skip forward once to next song
- Press again, once, to continue skipping forward
- MUSIC SKIP BACKWARD Press bottom left button (2B) once
- SINGLE BEEP SOUND
- Music will skip back to previous song
- Press again, once, to continue skipping back
TO POWER OFF: HOLD RIGHT BUTTON (1) FOR 4 SECONDS
LIGHT INDICATOR KEY
SOLID YELLOW – CHARGING
SOLID GREEN – FULLY CHARGED
FLASHING BLUE/PURPLE – PAIRING
SOLID BLUE – PAIRED
HELMET INSTALLATION:
Alta Bluetooth@ headphones are compatible with any snow helmet that features
‘audio ready” ear pads. Simply place your headphones into your helmet’s audio
ready ear pad sleeves and run the headphone speaker cord along the back frame
of the helmet behind the interior lining.
WARRANTY
We build our reputation by creating quality products.
If you experience a problem that is a result of defect in materials or
workmanship, Wildhorn warrants this product to the original purchaser for a
period of (2) years from the original purchase date. Warranty does not apply
to damage resulting from impact, misuse, abuse, accident, negligence or normal
wear and tear. Wildhorn Outfitters has the sole discretion to determine
manufacturer’s defects.
Wildhorn Outfitters is an outdoor gear company nestled in the Wasatch Mountains of Utah. We believe life is better when we connect with each other often – and outside. We work to design quality, innovative, easy-to-use products that inspire our customers to have more shared experiences in nature.
CAUTION
Enjoy your Wildhorn Alta Bluetooth@ Headphones at safe audio levels and at a
volume that allows you to be aware of your surroundings. Listening at high
volume for extended periods may damage hearing.
Made in China
FCC ID: 2A4RL- BT201
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 1 5 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
*FOR WILDHORN PATENT INFORMATION
VISIT: WILDHORNOUTFITTERS.COM/IP
WILDHORN OUTFITTERS
1 1845 South 700 East Suite 200,
Draper, UT 84020
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>