Guangzhoushiwuguangshisewutaisebeiyouxianggongsi SP-017 Par Light with Remote Controller User Manual
- June 5, 2024
- Guangzhoushiwuguangshisewutaisebeiyouxianggongsi
Table of Contents
User Manual
Par Light with Remote Controller
| ON/OFF LED
Through the key quickly ON or OFF light
---|---
Manual dimming
0-255 R/G/B, through the up and down keys, to change the LED light The
brighter the degree, the greater the numerical
colors
Level 1-64 change, through the up and down keys, to select different color
combinations
The gradient
Level 1-64 change, through the up and down keys, to select different color
combinations
Pulse variable
Level 1-64 change, through the up and down keys, to select different color
combinations
Jump
Level 1-64 change, through the up and down keys, to select different color
combinations
save
Settings click this button after saving, starting up the current interface
functions
Console mode
By means of the numerical key to add and subtract the address or between
numerical keys Select address code values; No access control table, d001 as
from machine model
Sound
Along with the music rhythm changes
Up
Increase the numerical
Down
To reduce the numerical
Digital keys 0-9
By control, the table chooses a different address
LCD Digital display function:
| Key-press | Mode | Description |
|---|---|---|
| [MENU] | Function | DMX control/colors selection/colors pulse/colors |
transition/sound control/amnual set
[UP]| Up| Increase values
[DOWN]| Down| Decrease values
[ENTER]| Enter| Confirmation button-After pressing this button, all setting
values will be saved
Operation Instructions
| MENU | Description |
|---|---|
| D001-D512 | DMX mode, change the numerical value by up and down |
| CC01-CC64 | Colors selection, select different colors up and down |
| RBO 1-RB 16 | Colors shade, change speed by up and down, the bigger values, the |
faster
PLOI-PL16| Colors pulse transform, change speed by up and down, the bigger
values, the faster
SD01-SD16| Colors transition, change speed up and down, the bigger values, the
faster
Sound| Sound control mode
R000-R255| Manual set R, Red color brightness setting, change the brightness
by up and down
G000-G255| Manual set G, Green color brightness setting, change the brightness
by up and down
B000-B255| Manual set B, Blue color brightness setting, change the brightness
by up and down
DMX Control Parameter Chart
| Channels | Value | Function |
|---|---|---|
| CH1 | 0-255 | Color brightness control(this change should use together with CH2, |
CH3 or CH4)
CH2| 0| Red light off
1-255| Red brightness from dark to bright
CH3| 0| Greenlight off
1-255| Green brightness from dark to bright
CH4| 0| Blue light off
1-255| Blue brightness from dark to bright
CH5| 0-7| No strobe flash
8-255| Strobe flash(from slow to fast), the bigger values, the faster
CH6| 0-10| Manual control(CH1-CH5)
11-60| Colors selection(colors contorted by CH7)
61-110| Colors shade(colors contorted by CH7), the bigger values, the faster
1 11-160| Colors pulse transform(speed contorted by GH7)the bigger values, the
faster
161-210| Colors transition(speed contorted by CH7)the bigger values, the
faster
211-255| Sound control
CI-17| 0-255| Colors selection/colors shade(the bigger values,the faster)
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>