Shenzhen Kaixuda Electronics P4 JSB Bluetooth Dongle User Manual
- June 5, 2024
- Shenzhen Kaixuda Electronics
Table of Contents
P4 JSB Bluetooth Dongle
User Manual
Wireless Headphone / Microphone Adapter For P4
Wireless Headphone&Microphone adapter delivers a wireless high-quality stereo
experience using your existing Bluetooth headphones via 4.1K high-def
sound quality. This wireless solution allows you to use your favorite
Bluetooth headphones with your P4.
Fine-tuned and calibrated to enhance and transmit all P4 in-game audio.
Control your game and voice volume via your existing Bluetooth headphones, if
available. Expanding your P4 wireless headphone options to any Bluetooth
headphones in your arsenall.
- Anexisting Bluetooth headset or headphones is required for sound transmission.
- The indluded mic adapter will replace the existing mic on your Bluetooth headset.
1. Turn on your P4.
Insert the Bluetooth dongle into one of the USB ports.
2. The LED indicator on the dongle flashes slowly first, then press the dongle button 2 seconds, the LED indicator flashes quickly, this signals pairing mode. Turn on your Bluetooth headphone and tum it to pairing mode.
The Bluetooth dongle and your Bluetooth headphone will automatically pair. The
LED indictor of the dongle will turn blue when connecting successfully. And
the Bluetooth dongle will automatically connect to the Bluetooth
headphone at next time.
3. Insert the microphone into the earphone jack of P4 controller.
- Move to the P4 user interface / home screen.
- Select menu ” Devices ”,
- Select “ Audio Devices”.
- Set” Input Device ” to” Headset Connected to Controller’.
- Set” Output Device” to“ USB Headphones”.
- Adjust and test volume of Microphone,
- Adjust Bluetooth headphone volume.
- Set ” output to headphones” to “All Audio.”
Now enjoy your P4 entertainment!
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment