DEYUAN Double Color/High Low Beam Wiring Harness Kit With Wireless Remote Control Instruction Manual
- June 5, 2024
- DEYUAN
Table of Contents
DEYUAN Double Color/High Low Beam Wiring Harness Kit With Wireless Remote
Control
OVERVIEW
Specification
- Name: Double Color/High Low Beam Wiring Harness Kit With Wireless Remote Control
- Switch Material: Plastic,Keyboard switch (with back glue) can be installed in any part, which is more convenient to operate.
- Switch Relay: DC 12V Amp: 40A power relay fuse :40A blade fuse
- Number of Lights: One Light
- Recommend Max Wattage: Maximum support for 300W and single lamp working below 300W.
- Input power:DC12V
- Length: around 11.48ft /3.5M
- Material: high quality PVC, copper and metal
- Highest Working temperature: -40 85 degree Celsius
Wide Application:
Professionally assembled wiring loom kit suitable for 12V HID ,12Vhalogen, 12V
LED driving lights,offroad lights bar, offroad spot lights, fog lights, work
lights, replacement fog lamps add-on fog lights hid lights etc.
Remote Wiring Harness Kit Instruction Manual
Specification
Name: remote wiring harness for Car Fog Lights Work Driving Lights Bar
- Switch Material: Plastic,Keyboard switch (with back glue) can be installed in any part, which is more convenient to operate.
- Switch Relay: DC 12V Amp: 40A power relay fuse :40A blade fuse
- Number of Lights: One Lights
- Recommend Max Wattage: Maximum support for300W and single lamp working below 300W.
- Input power:12V/24V (if the battery of your car is 24V, just replace the relay with 24V) detault 12V
- Core: 14AWG (2 square)
- Length: around 11.48ft /3.5M
- Material: high quality PVC, copper and metal
- Highest Working temperature: 85°C
-
- Plug: universal plug
Package included:
- 1x remote Wiring Harness Kit
- lx Safety blade fuse
- lx Instruction manual
Wide Application:
Professionally assembled wiring loom kit suitable for 12V HID ,12Vhalogen, 12V
LED driving lights,offroad lights bar, offroad spot lights, fog lights, work
lights, replacement fog lamps add-on fog lights hid lights etc.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>