UBRIDGE MG-G01 USB GPS Device User Manual
- June 5, 2024
- UBRIDGE
Table of Contents
UBRIDGE MG-G01 USB GPS Device
Part list
How to Use
- Connect to the PC Connect USB GPS to the PC.
- Check the connection Check if the USB GPS is properly connected to the PC.
Statements
- We have made every effort to provide the most current intonation about the product.
- We do not grant any guarantees as to the contents al the present instruction manual and disdain any implied g.iarantees concerning mar1<el value or suitability for specific purposes.
- The Information contained here is an inslr\Jction intended to enable the OOIT8d usage and maintenance al the receiver.
- We reserve the right to introduce amendments, changes, or translations al the user maruil without prior notification therefor. For this reason, we recommend you reguar1y visit our website in order to obtain the latest information
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Compliance Information: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Exposure to Radio Frequency Radiation
Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit.