VAOYAO SM8 Smart Watch for Android-Samsung-iPhone User Manual

Smart Watch User Manual

Thank you for choosing our product!
To have a comprehensive understanding and using this device, to know all the features and simple operation method, please read this manual first.
The functions on the user manual may be little different with physical, please make the final products as the standard.
The typing errors in this manual and discrepancies will be timely updated with the latest products. If we have updates, this manual will be subject to change without notice. Our company reserves the right of final interpretation.

Remark: The product supports waterproof with IP68 level, it is available to wear it while wash hands, swim, in raining, etc.
Do not use it when have a hot shower/bath or sauna, the vapors will get into the host, scratch damage of peripheral components. All these are beyond the scope of the warranty.

Operation Guide

Side button: Long press to switch watch, short press ON/OFF the display.
Touch panel gestures: Tap the icon to enter each function, swipe right to return; swipe down to enter the Status Bar; swipe up enter Notification center; swipe left to enter Main  menu; Swipe right enter Workouts mode.
Watch face switch: Hold the home watch dial for 2 seconds to switch different watch faces.
Watch band change: Easy-kit changeable watch band, it is standard 22mm width watch band.

Charging instruction: This product adopts magnetic charging. Put the charging points connect to the back of the device charging pins, it will charge automatically. It supports  PC USB or standard 5V charger. 150 mins to full charge the device, normal use for 5-7 days.

Caution: Do not make the magnetic charging cable any 2 pins connect with conducting material at same time, it may cause short circuit.

Watch connects to Phone, download the App “TFit” in the Phone at first, reference following 2 methods:

1. Android/iOS Phone: Scan following QR code image by browsers or any Scanner to Download “TFit”.

http://dw.ss-tjd.com/DownLoad/TFitzh.html

2. Android Phone: search and download “TFit” app from Google Play; iOS phone: search and download “TFit” app from Apps Store;
   After downloading and installation of the TFit app, please turn on Bluetooth and start TFit, enable app permissions and notifications and add your personal information.
   Enter search Bluetooth device interface search for “L18” device (turn on the GPS in the smart phone before binding) and tap connect.

Unbind the device: In TFit, tap device – Add device – Connected, tap confirm disconnect device. Then into phone setting, unpair the device and phone. Then you are all set for unbind the L18 between your phone.
Set notification: In “TFit”, click device – Notifications – it will prompt you to allow the notification permission, and select the APP to be notified.

• Firmware upgrade: When Bluetooth connected, in same interface of “TFit”, click “More- “Updates”, if there is new firmware available, click to update to the latest watch firmware version.

Notice: If the upgrade is not successful, please reconnect and try to upgrade again.

Remark: As different mobile phones have different Bluetooth protocols, sometimes the Bluetooth connection between the Smart Watch and the mobile phone could be unstable. In case you encounter any instability between your mobile phone and the Smart Watch, please restart Bluetooth, then try to connect again. Some settings on the phone need to be adjusted for data transmission to work smooth (please ignore if your phone does not have those functions).

Main Features:

• Language/Time/Date：
  Synchronizing of language/date/time between the mobile phone and the Smart Watch after being connected
  ● Standby interface:
  There are couple watch faces for option, long press 2 seconds at the home to adjust when in the homepage.

• Notifications:
  Synchronizing and display of app notifications such as Facebook, WhatsApp, SMS, Email etc., between the mobile phone and the Smart Watch. Up to 5 notifications can be  displayed on the watch. Please adjust the settings in the TFit app and allow notifications to be displayed (app permissions).

• Status Bar:
  Pull-down from the standby state screen. The following will be shown Bluetooth connection status / battery status / brightness adjustment Slide left in status bar to see  weather information (to show accurate weather information data sync from the app and the phone GPS needs to be switched on).

• Activity info: Showing the workout and health data including Steps, Distance, Calories consumption. This data will be saved until midnight (12:00 am) every day and then  reset to 0 values for coming day. You can look up previous data in History.

• Exercise:
  Select a sports mode to record your workout. The recoding will be paused when pressing the power button. You can choose to save, delete or continue the measuring.  Recording and saving the workout data.

• Sleep monitor:
  Sleep monitoring will be automatically active from 10:00pm to 8:00am the next morning. You can check the details of sleep quality with the TFit app on the phone.

Electrocardiogram (ECG) Function:
The device combines an optical heart rate sensor and ECG sensor to show information about the user’s heart function for reference. When this function is activated it needs  about 30 seconds of measuring and reading to provide a result.
Please note: The device is not a medical device. Any values shown are for reference only.

Blood Pressure Function:
Please put your hands flat on a surface and do not move. When this function is activated it needs about 45 – 50 seconds of measuring and reading to provide a result
Please note: The device is not a medical device. Any values shown are for reference only.

Heart Rate Monitoring Function:
When this function is activated, the heart rate is being measured by the device scanning the surface capillary of the skin with green optical diodes. Please allow for about 2  seconds to start measuring and recording. Slide to other menus to stop measuring. Please refer to information about average heart rate, heart rate while exercising for your age  group and gender online and/or ask your medical practitioner for advice.
Please note: The device is not a medical device. Any values shown are for reference only.

Blood Oxygen Function:
Blood oxygen (SP02H) level is the amount of oxygen circulating in the blood. Please refer to information about healthy or abnormal blood oxygen percentage for your age  group and gender online and/or ask your medical practitioner for advice.
Please note: The device is not a medical device. Any values shown are for reference only.

Thermometer: The body temperature of normal people starts to be measured as soon as they enter. The body temperature of normal is 35.9-37.2 degrees. The body temperature varies from time to time every day.

• Remote Control (Music):
  Allows to activate and control music playback on the phone via the Smart Watch (a music playback app should be installed on the phone).
  Stopwatch:
  Tap the bottom right corner to start, tap again pause. Tap the bottom left corner to segment timing, click the middle to view segment timing details, and swipe right to
  return.

• Alarm Function:
  You can set several alarm times via the TFit app on the phone.

• Find Phone Function:
  When the device and the mobile phone are connected, the Find Phone Function can support locating your mobile phone. Tap “Find Phone” and locate your phone via the ringtone/sound coming from your phone.

• About: Check model number, Bluetooth address, version number

• Reset: Tap to reset all data (factory mode).

• Sedentary, drink reminder: Via the TFit app set a time for exercise and/or a reminder to drink

• Wrist Wakeup:
  You can “wake up” the watch with wrist movement. Please set this function with the TFit app. Please note that this might increase power consumption.

Warranty Details
The manufacturer/distributor warrants the product to be free from defects in workmanship for a period for 12 months from date of purchase. Defects that will  occur under  normal use and care will be compensated, replaced or refunded at our discretion.

Proof of Purchase
This warranty is valid for the original purchase and is not transferable. Please keep your purchase docket, tax invoice or receipt as the best proof of purchase, and as proof of date on which the purchase was made.

IMEI code:
Buy store:
Customer signature:
Signature of Shop Assistant:
Shop Stamp:c

Extent of Warranty
This warranty only covers defects in workmanship or parts. All defective products or parts will be repaired or replaced. This warranty does not cover batteries or any other consumable items.

Normal Wear and Tear
Normal wear and tear of the product or parts of the product is not covered by this warranty.

Not Included in the Warranty Terms
This warranty does not include:

• Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, loss of parts, tampering or  attempted repair by a person not authorized by the distributor.
•  Any product that has not been installed, operated or maintained in accordance with the manufacturer ‘s instruction manual provided with the product.
•  Any product that has been used for purposes other than the intended use. Any damage caused by improper power input or improper.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>