EEZEPC HD Home Camera User Manual

EEZEPC HD Home Camera

Home

Live Music

Select and play 5 lullabies and 2 records on the Music interface to lull your child to sleep, relieve mood, etc.

• * According to the selected lullaby/records, it will be played in an infinite loop from up to down.

Records adding

1. Click <+Add user record> enter record interface, click (no need long pressing) the intercom button to start recording.
   • Recording time will be 1-30s.
2. Click the intercom button again to stop recording, or it will be stopped automatically after 30s.Then the recording interface will be closed and pop up the records.
   • Set record name. Click the button to play the recorde voice. If you are not satisfied with the records, click to return to the recording interface and tr y again. Click to save the records.
3. After saving, it will exit the recording interface automatically and return to Music interface. All records will be shown there synchronously. You could click the play button to play the records.
4. Long press the records on the Music interface to change the record name.

General

Please refer to the following steps to quick access the APP main functions.

1. ➡ < General > **TIME**

2. Go to -> .

3. Select the needed time zone, then click . LED Indicator

4. Enable or disable the camera LED indicator. Camera initialization

5. Initialize all camera settings except network settings, camera name and password.

Initialize all camera settings, including network settings, camera name and password. Please press and hold the camera＇s initialization button for a least 8 seconds until it beeps.

Delete camera

Delete the current camera.

Motion Detection

When motion is detected, it will makes video recording according to the motion recording schedule, or send push and email according to the notification settings.

1. 1. <Camera Setting ➡ <Enevt >.

2.  Turn on Motion Detection switch to enable Motion function.
3. Setting Motion Sensitivity.
4. Click to save settings.

• When sensitivity is higher, motion is easier to be detected.
• When sensitivity is lower, it will reduces the unnecessary motion detection events.

Setup Motion zone

1. 1. 1.<Camera Setting ➡ <Enevt >.

2. T urn on Motion Detection switch to enable Motion function.
3. Click.
4. Click to delete all the default area.
5.  Drag to draw an area on the screen as Motion detection area

  * Up to 3 Motion detection areas can be set.
6. Click <Apply> to s ave the setting area.

• When running at the first time, the entire screen is set as Motion detection area by default.
• Up to 3 Motion detection areas can be set at the desired position.

Open Deterrent

1. <Camera Setting ➡ .
2. Enable to turn on the deterrence white light function which is triggered by Motion linkage.
   • To trigger the deterrence white light function by linkage, firstly you must set the parameters, schedule, trigger time, etc. of this function.

Audio Detection

When Audio is detected, it will makes video recording according to the Audio recording schedule, or send push and email according to the notification settings.

• <Camera Setting ➡ .

• Turn on Audio Detection switch to enable Audio function.

• Setting Audio Sensitivity.

• When sensitivity is higher, Audio is easier to be detected.

• When sensitivity is lower, it will reduces the unnecessary Audio detection events.

• Turn on Lullaby Play to enable Audio detection linkage to play music.

  • it will default to linkage to play Alarm-Siren.

• click to save settings.

Deterrence

1. <Camera Setting ➡ .
2.  Turn on Deterrence switch to enable Deterrence function.
3. Turn on Light Switch to enable Light function.
4. Setting Light Level, The higher the level, the brighter the white light brightness.
5.  Setting Duration,5-180s optional.
6. Turn on Color Image, when white light is triggered under night view, the image will change from black/white to color. After the event is finished, the image will change back to black/white.
7.  Select Deterrence Mode, you can select Warning Light and Strobe.
   • Waring Light: White light will always bright.
   • Strobe: White light flashing.
8. Turn on Siren Switch to enable Sire function.
9. Setting Light Level. the higher the level, the the louder the speaker.
10. Setting Siren Duration,5-180s optional.
11. Setting Sensitivity, the higher the level, the easier it is to trigger Deterrence after triggering Motion.
12. Setting Deterrence Zone.
13. Setting Deterrence Schedule.

Setup Deterrence Zone

1. <Camera Setting ➡ .
2. Turn on Deterrence Detection switch to enable Deterrence function.
3. Click < Deterrence zone>.
4. Click < Delete All> to delete all the default area.
5. Drag to draw an area on the screen as Deterrence detection area.
   • Up to 3 Deterrence detection areas can be set.
6. Click to save the setting area.

• When running at the first time,the entire screen is set as Deterrence detection area by default.
• Up to 3 Motion detection areas can be set at the desired position.
  • Deterrence Zone must be in the Motion area to ensure that the Deterrence is triggered after the Motion is triggered, so that the white light/speaker sounds.

Setup Deterrence Schedule

1. <Camera Setting ➡ .
2. Turn on Deterrence Detection switch to enable Deterrence function.
3. Click < Deterrence sch edule>.
4. Click the desired date or drag up and down to set t ime.
5. Click to save settings.
   • When the schedule is in time, triggering Motion linkage Deterrence will make the white light bright/speaker sound.

Record Schedule

1. <Camera Setting ➡ .
2. Click to select an event type
   • For example, if you select as event type, then it will show Motion detection settings.
3. Click the desired date or drag up and down to set time.
4. Click to save settings.

SD Card

1. <Camera Setting ➡ .
2. Switch to choose whether to use function.
   • < Overwrite> is enabled by default.
   • When the SD card is full, the earlier video will be automatically overwritten.
3. Click to format the recording information in the SD card.

• When the SD card is broken, please remove it after the camera is powered off. In addition, please note that if you insert the SD card from another IT equipment to the camera, the data in the SD card may be deleted. Please save the data in the SD card first, then format and use it.
  • Recommend SD card
  • Manufacturer : Kinstone, Sandisk, Transcend.
  • Specifications: Minimum Class 6 or higher, MLC method or higher, maximum128GB, FAT32 file system supported.

Smart Phone Notification

For the smartphones that support Google Push,the push messages will be sent to the smartphone when an event occurs.

1. 1.<Camera Setting ➡ <Notification >.
2. 2.Turn on Push Notification switch to enable smartphone push notification function.
   • Only the smartphones which can support. Google Push can use this function.
3. Clic k <Notification Schedule>.
4. Click to select event type.
   • For example,if you select as event type, then it will shows Motion detection settings.
5. Click the desired date or drag up and down to set time.
6. Click to save settings.

Email Notification

Set up email to receive email push when an event occurs.

•  Switch to enable email settings.
•  Register the sender’s email to send notification messages.
  • Only Google mail(MGail) can send emails.
• Registered email can receive push notifications Up to 3 recipient emails can be registered.
• Click to save settings.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>