Lenovo Avocent Universal Management Gateway 6000 for IBM User Guide

: June 3, 2024
: Lenovo

Lenovo Avocent Universal Management Gateway 6000 for IBM

Lenovo-Avocent-
Universal-Management-Gateway-6000-for-IBM-product

Avocent Universal Management Gateway 6000 for IBM

Product Guide (withdrawn product

The Avocent® Universal Management Gateway 6000 for IBM® is the first data center device that enables true, real-time, and integrated monitoring, access, and control across IT and facilities systems in the data center. The appliance makes it possible for data centers to have a unified approach to infrastructure management, resulting in greatly reduced cost and more efficient management and control.
The Avocent Universal Management Gateway (UMG) appliance serves as a single point for secure local and remote access and administration of target devices. The UMG supports secure remote data center management and out-of-band management of IT assets from any location worldwide.
The UMG appliance provides keyboard, video, and mouse (KVM) capabilities and can also remotely perform server management tasks, including power control and console access, on managed target devices. Multiple administrators can be logged in to the appliance at the same time and can use the web user interface (UI), the command-line interface (CLI), or DSView™ management software to access and configure the appliance. The following figure shows the Avocent Universal Management Gateway 6000 for IBM.

Lenovo-Avocent-Universal-Management-Gateway-6000-for-IBM-
fig-2

Did you know?

This rack-mounted appliance is a Data Center Infrastructure Management (DCIM) offering that enables you to have a single-pane view of physical space management, energy management, and asset management. Combined with Emerson Trellis™ and IBM Tivoli® software, the UMG appliance offers a common, real- time monitoring and management platform for all interdependent systems across IT and facility infrastructures.

Part number information

The following table shows the part numbers and feature codes for ordering the Avocent Universal Management Gateway 6000 for IBM.
Table 1. Part numbers and feature codes for ordering

Description	Part number	Feature code
Avocent Universal Management Gateway 6000 for IBM	3858D3X	None
UMG KVM Module VGA+SD Dual RJ45 (UMIQ Module)	00AK142	A4X4

The Avocent Universal Management Gateway 6000 for IBM includes the following items:

Appliance Quick Installation Guide
Mounting Bracket Quick Installation Guide Two power cords, C14 C13 10A/250V 2 meters RJ-45 to DB-9F cross adapter
Mounting brackets and screws
Safety and Regulatory Statements Guide

Specifications

1U rack-mounted unit
Front ports:

VGA and USB 2.0 ports for local KVM console attachment
USB ports also support smart card reader, CD, DVD, or mass storage devices.
RJ-45 serial port for local setup (command-line interface for managing and configuring the appliance)

Rear ports:

40 RJ-45 ports for serial, service processor, or KVM connections (auto-sensing)
Management 10/100/1000 Ethernet ports for firewall, DSView, and authentication servers
External sensor ports

Supports up to 40 concurrent KVM sessions plus 20 additional shared sessions
KVM sessions support enhanced video resolution up to 1600 x 1200 or 1680 x 1050 (widescreen) native from target to remote.
Supports up to 1024 service processors
Supports up to 10,000 data point collections
AC Power: 100-240 VAC, 50/60 Hz, and 2 A
Dimensions:

Height: 43 mm (1.70 inches)
Width: 434 mm (17.1 inches)
Depth: 508 mm (20.0 inches)
Weight: 6.4 kg (14.2 pounds)

Operating environment:

Temperature 0 to 50 °C
Humidity 20 – 85% (non-condensing)

Features

The Avocent Universal Management Gateway for IBM is the converged management solution for complete data center access and monitoring.

Simplified Remote Management

Consolidated centralized access to racks/blades improves operational efficiency, freeing resources to focus on initiatives that generate higher business value

Universal Connectivity

Complete data center connectivity reduces complexity and accelerates IT standardization

Real-Time Visibility and Control

Managing assets from a single pane of glass in real-time enhances data center efficiency and enables better incident triage and quicker response

Multi-Tenant Security

Provides a secure environment improves compliance and auditing tasks for customers considering co-location and Cloud implementations

Consolidated remote data center management

Digital KVM
Serial Console Management
Service Processor Management
Environmental Management

Comprehensive “top of rack” integration capabilities

LCD Access & LAN Access
VGA KVM Control of servers
Physical Power Control of any device
Serial (RS232) Control of network switches, servers, and storage assets Server Control

Embedded vKVM Control Embedded Power Control Embedded Serial over LAN Embedded Sensor Status

Physical Environment Sensor Status

Real-time monitoring logging and alerting
Built-In Redundancy

Dual power supplies, dual gigabit network cards and RAID 1 storage.

Ease of Setup

Web-based user interface designed for quick setup and configuration.

Secure access

You can securely access the appliance through the following local (analog console port) and remote (digital IP) options:

Local analog KVM connection through the VGA and USB ports at the front of the UMG appliance USB ports
serial console connection through the CLI
Secure web UI using a network connection through TCP/IP
Serial target device connection using Telnet, SSH v1, SSH v2, or a raw connection to a target device

Users and administrators can perform most tasks through the web UI (accessed with HTTPS). The web UI runs in Internet Explorer and Firefox browsers on any supported computer that has network access to the appliance. An administrator can use the web UI to create user accounts, authorize groups, and configure security and ports. Authorized users can access connected devices through the web UI to troubleshoot, maintain, cycle power, or to reboot connected devices, and change their password.

Service processor / IMM support

Management through service processors and Integrated Management Modules (IMM) Supports a full range of service
processors, including access through IPMI 1.5 and IPMI 2.0 Supports service processors from multiple server vendors
Service processor auto-discovery and auto-management
Secure service processor access through the service processor browser UI and KVM
Local VGA console access to service processor sessions and data
Granular permissions and clean UI presentation

Management through the serial console

Serial data logging and alerting
Soft pin-out support
SSH to Serial pass-through

Management through KVM ports

Non-blocking KVM support
Connections use IP
Full 100 m cable length support
The UMG 6000 appliance supports up to 40 concurrent KVM sessions plus 20 additional shared sessions.
Highly resistant to Electrical Magnetic Interference (EMI)
Virtual media and CAC support
Requires the usage of the UMIQ module, part number 00AK142 (one per server connection)

UMIQ-V2 module

The UMIQ module, part number 00AK142, is used to connect a server to the UMG appliance. The module has a VGA port, USB port, and one RJ-45 port to connect to the server (RJ-45 for the IMM service processor), and one RJ-45 port to connect to the UMG appliance. The module provides VGA/media access and service processor access.

The UMIQ module has an embedded Linux OS that boots when the UMIQ module has power. The UMIQ module requires full USB bus power to operate correctly. The DC power plug is useful for servers that do not provide sufficient power, for devices that lack USB interfaces, or for provisioning stations where the UMIQ module is moved regularly from one server to another.
While the UMIQ module has power from USB or DC, it is considered to be at full power and can maintain the secure IP connection with the appliance and KVM sessions with users. If the UMIQ module loses power but is still connected to the appliance, the UMIQ module requests that the appliance send standby power through the UTP cable to prevent the UMIQ module from going offline.
The UMIQ module running on standby power cannot support KVM sessions, but it can maintain its connection to the appliance. The UMIQ-v2 module can maintain the bridge between its two ports, ensuring that the SP is always accessible. The appliance uses the DC connector for all of its power needs and the USB plug is used only for data exchange. The appliance draws 5 V at 0.5 A from either DC or USB.
The UMIQ module offers a flash upgrade feature that allows the UMG appliance administrator to update UMIQ modules with the latest firmware available. UMIQ modules are automatically updated when the appliance is updated.
Control of virtual media and smart card-capable appliances
The UMG appliance allows you to transfer data on virtual media to and from any target device. Remote systems can be managed efficiently by allowing operating system installation or recovery, hard drive recovery or duplication, BIOS updating, and target device backup. Smart cards such as the Common Access Card (CAC) can be used to store identification and authentication to enable access to computers, networks, and secure rooms or buildings.
Virtual media and smart card readers can be connected directly by using USB ports on the appliance. In addition, virtual media and smart card readers may be connected to any remote workstation that is running the remote web UI or DSView management software and is connected to the appliance using an Ethernet connection.

Flexible users and groups

An account can be defined for each user on the appliance or on an authentication server. An administrator has an account by default and can add and configure other user accounts. Access to ports can be optionally restricted based on authorizations an administrator can assign to custom user groups.

Data logging, notifications, alarms, and data buffering

An administrator can set up data logging, notifications, and alarms to alert administrators about problems with email and syslog messages. An administrator can also store buffered data locally. Messages about the appliance and connected servers or devices can also be sent to syslog servers.

Power management

The UMG appliance enables users who are authorized for rack power distribution units (PDU) and service processor (SP) power management to turn on power on, turn off power, and reset servers through their embedded SP devices that are plugged into a connected rack PDU.

Auto-discovery

An administrator can enable auto discovery to find the host name of a target that is connected to a port. Auto discovery’s default probe and answer strings have a broad range. An administrator can configure site-specific probe and answer strings. Auto-discovery can also be configured through the DSView software.

IPv4 and IPv6 support

The appliance supports dual stack IPv4 and IPv6 protocols. The administrator can use the web UI or CLI to configure support for IPv4 and IPv6 addresses.
The following IPv4 and IPv6 support is provided in the appliance:

DHCP
DSView software integration
Ethernet interfaces eth0 and eth1
Firewall (IP tables)
HTTP
Linux kernel
Remote authentication: AD and LDAP servers SSH and Telnet access
Syslog server

Note:
Remote authentication NFS, NIS, and IPSec are not supported by IPv6.
DSView management software
The DSView Remote Data Center Management (RDCM) software may be used with the UMG appliance to allow IT administrators to remotely access, monitor, and control target devices on multiple platforms through a single, web-based user interface. DSView software proxy and SSH Pass-through features enable convenient and secure remote access for LAN and WAN clients.
The following table lists the DSView software that is available from IBM.
Table 2. DSView part numbers

Description	Part number	Feature code
Avocent DSView 3 Hub (100 Devices)	46M5379	4170
Avocent DSView 3 Standard Pack (500 Devices)	46M5380	4171
Avocent DSView 3 Plus Pack (2000 Devices)	46M5381	4172

Trellis support

The UMG appliance works with the Trellis Data Center Infrastructure Management (DCIM) software from Emerson.
A modular solution that fits every sized company, the Trellis platform taps into servers, routers, storage, power distribution units, environmental monitors and more to intelligently aggregate, analyze and react to change and loads placed on environmental controls. And with the Avocent Universal Management Gateway appliance, you can aggregate KVM, serial, and service processor functionality with environmental and physical monitoring capabilities.
When combined with the Trellis platform, the Avocent Universal Management Gateway appliance efficiently discovers, collects, and stores data from devices. The Trellis platform enables the user to easily perform trending, reporting, and analysis.
Distinctive capabilities include:

Real-Time Data Collection — For businesses operating high-density environments, speed is critical. The appliance collects data from distributed environments and heterogeneous equipment (IT and facilities) in real time. Continuous streams of data are collected and aggregated in seconds by connecting natively to the device.
Complex Event Processing — Using a set of unique techniques and tools, the data collected by the appliance is filtered so that only relevant information is provided to a specific user. This processing helps the user to understand and control event-driven information systems.

Tivoli support

The Trellis Platform further fits into the Tivoli portfolio:

IBM Asset Management: Provision assets, view asset maintenance history, and issue work orders
IBM Change Management: Generate an RFC, follow a change approval process, and update data in an asset repository and the Trellis platform
IBM Service Catalog: A service request kicks off a space-planning initiative
IBM Monitoring: Determine the optimal placement of a workload, and identify consolidation opportunities
IBM Analytics: Intelligent data processing/analytics
IBM Event Management: Event correlation, management, and automation
IBM Business Service Management: Identify the potential business services that are impacted by MACs or data center events

Typical connections

The following figure shows how servers and sensors are connected to the UMG appliance, either through the UMIQ module or directly to the IMM service processor. Lenovo-Avocent-Universal-Management-Gateway-6000-for-IBM-
fig-5

For local console access, the UMG appliance provides connections on the front of the unit, as shown in the following figure. The appliance supports local KVM access, including local CAC and USB media support and serial console access for setup and administration. Lenovo-Avocent-Universal-Management-
Gateway-6000-for-IBM-fig-6

Operating system support

This product runs in Microsoft Windows or Linux environments.

Warranty

The Avocent Universal Management Gateway 6000 for IBM has a three-year warranty. Customer Replaceable Unit (CRU) and IBM On-Site Repair (IOR) support is available, 8am – 5pm, Monday through Friday, next business day response.

Agency approvals

The Avocent Universal Management Gateway 6000 for IBM adheres to the following safety requirements:

UL 60950-1 :2007
CUL
FCC Part 15 Class A ICES-003 Class A
CE
EN55022 Class A
EN55024
EN61000-3-2
EN61000-3-3
C-Tick
BSMI
VCCI
KCC

US Announcement Letter:
http://ibm.com/common/ssi/cgi- bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS114-052
Lenovo rack and power infrastructure options product page
http://shop.lenovo.com/us/en/systems/servers/options/systemx/rack-power- infrastructure/kvm/
Lenovo Press Product Guides for Rack options
https://lenovopress.com/servers/options/kvm

The following product publications are available from the Emerson Network Power website: http://emersonnetworkpower.com/en- US/Brands/Avocent/Resources/ManualsandTechBulletins

UMG Appliance – Quick Installation Guide
UMG Appliance Mounting Bracket – Quick Installation Guide
UMG Appliance – Installer/User Guide
UMG Appliance – Command Reference Guide
UMG Appliance – DSView Software Plug-In

Product families related to this document are the following:

KVM Switches & Consoles

Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only the Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering the subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
8001 Development Drive
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION ”AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
© Copyright Lenovo 2022. All rights reserved.
This document, TIPS1058, was created or updated on October 6, 2015.
Send us your comments in one of the following ways:

Use the online Contact us review form found at:
https://lenovopress.lenovo.com/TIPS1058
Send your comments in an e-mail to:
comments@lenovopress.com

This document is available online at https://lenovopress.lenovo.com/TIPS1058.

Trademarks

Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at
https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
The following terms are trademarks of other companies:
Linux® is the trademark of Linus Torvalds in the U.S. and other countries.
Internet Explorer®, Microsoft®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others.