SINGER SteamCraft Plus 220V Steam Iron Instruction Manual

SINGER SteamCraft Plus 220V Steam Iron

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING AND KEEP IT FOR FUTURE REFERENCE. When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following: READ ALL INSTRUCTIONS BEFORE USING – KEEP AWAY FROM WATER DANGER Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

1. Always unplug appliance immediately after using.
2. Do not place or store appliance where it can fall or be pulled into a tub or sink.
3.  Do not place or drop in water or other liquid.
4.  If appliance falls in water, unplug it immediately. Do not reach into water.

WARNING: To reduce the risk of fire, electrical shock, or injury:

1. To reduce the risk of contact with hot water emitting from steam vents, check appliance before each use by holding and facing it away from body and operating steam button.
2.  Unwind and straighten power cord and remove cardboard soleplate cover before use.
3. This appliance is intended for household and residential use only. This product is not approved for commercial applications. Use appliance only for its intended use.
4.  To protect against a risk of electric shock, do not immerse the appliance in water or other liquids.
5.  The appliance should always be turned off before plugging or unplugging from outlet. Never pull the cord to disconnect from outlet, instead grasp plug and pull to disconnect.
6.  Always disconnect appliance from electrical outlet when filling with water, emptying, or when not in use.
7. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Coil the cord loosely around the iron when storing.
8. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged.
9. If the appliance or power cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to avoid a hazard.
10. To avoid the risk of electric shock, do not disassemble the appliance. Take, or ship it to a qualified serviceperson for examination and repair. Incorrect reassembly or repair can cause a risk of fire, electric shock, or injury to persons when appliance is used.
11.  Close supervision is required for any appliance used by or near children. Do not leave the iron unattended while the iron is connected or on an ironing board.
12. . Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn steam iron upside down – there may be hot water in the tank.
13.  Never open the water tank door while the appliance is in use. The steam pressure could result in burns. Only open the door when iron is cool and unplugged.
14.  The use of accessory attachments is not recommended and may result in fire, electric shock or personal injury.
15. To reduce the likelihood of circuit over load, do not operate another high wattage appliance on the same circuit.
16. If an extension cord is absolutely necessary, a cord with an ampere rating equal to or greater than the maximum rating of the iron shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.
17. The iron should be used on a stable surface and placed on a stable surface. When placing the iron on its heel, the iron must be rested on a stable surface.
18. Never drop or insert an object into any opening (electrical or other), and do not use if one of the openings is blocked.
19. Do not use outdoors.
20. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
21.  Clean the appliance only with a dry or slightly damp cloth.
22. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
23.  Children should be supervised to ensure they do not play with appliance.
24. Do not direct steam at people, animals or electrical equipment, or iron clothes while they are being worn.
25.  When filling the water tank, please follow only the instructions provided in this manual. Do not use water with additives, vinegar, perfumes or chemical substances.
26.  Use only approved and supplied parts and accessories. Use of any other kind of accessory is not recommended.
27. The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
28. Read and follow all important notices in this guide.
29. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
30. This symbol states that the surface would be hot during use.

Product Information

The following features and accessories are included with your steam iron. Carefully inspect packaging material as some parts are shipped inside cardboard packaging. To obtain possible missing parts, refer to Consumer Support section of this manual.

1. Soleplate
2. Spray Nozzle
3. Water Tank Door
4. Steam Knob
5. Spray Button
6. Burst of Steam Button
7.  Temperature Select
8.  Cord Guard
9.  Water Tank
10. Temperature Setting

BEFORE FIRST USE

1. Remove any protective films or stickers from appliance.
2. Unwind and straighten power cord and remove cardboard soleplate cover before use.

NOTE: When using the steam function for the first time, test on an old towel, as some residue may remain inside the appliance. Press the Burst of Steam Button to ensure all residue is completely released.

Using Your SteamCraft Plus Steam Iron

1. This appliance is designed to use normal tap water. Use of other liquids may damage the appliance.
2. Plug in the appliance to an appropriate electrical outlet.
3. Start ironing when Mode Light panel stops blinking. This indicates the selected temperature has been reached and the iron is ready for use.
4. Always unplug the appliance after use.

FILL THE WATER TANK

1. Unplug the Power Cord from electrical outlet.
2. Move Steam Selector to the position.
3. Open Water Tank Door and fill Water Tank with water (to Max level).
4. Close the Water Tank Door.
5. Plug in Power Cord to electrical outlet and press the Temperature Select Button to switch on the appliance.

IMPORTANT: Never add fabric conditioner, starches or any other chemicals to water in your iron. Ensure your iron is switched off and unplugged from electrical outlet before filling.
SET THE TEMPERATURE
The appliance has different temperature settings to handle different fabrics. Turn the Temperature Control Dial to the right to switch the appliance on. The appliance will start at Low (NYLON). If you want to increase the ironing temperature, turn the Temperature Control Dial to the Right and Iron will cycle through the sequence, from “Low (NYLON)” to “Medium (WOOL/SILK)” to “High (LINEN)” to “MAX”.

IMPORTANT: Before you start ironing, read the garment labels and follow manufacturer’s ironing instructions that are often shown using symbols similar to those at right:
(If you are not sure what the fabric is made of, begin ironing at Low (•) Setting.)

IRONING

1. Press the Temperature Select Button to turn on the appliance and select your desired temperture.
2.  Depending on which temperature setting you have selected, the corresponding temperture bars will blink. When the iron is ready to use, the temperature bars will stop blinking and stay on.
3. Steam ironing is available for High & MAX temperature settings. You can move the Steam Knob back to position to generate steam for steam ironing. Move the Steam Knob forward to position to stop generating steam.

BURST OF STEAM

For extra steam to remove stubborn  wrinkles, simply press the Burst of Steam Button while steam selector knob is turned to position
Note: It might be necessary to press the Burst of Steam Button a few times before you can use the function. For optimum steam quality, do not operate the Burst of Steam more than three times in succession, waiting 2 seconds between button presses.

VERTICAL STEAMING
To remove wrinkles from delicate fabrics, garments or curtains in the hanging position:

1. Set temperature setting to “High (LINEN)” or “MAX”.
2. Hold the iron in vertical position 15-30 centimeters (6-12 inches) away from the garment.
3. Move the Steam Selector to position to generate steam.

For Burst of Steam in vertical position:

1. Set temperature setting at “High (LINEN)” or “MAX”.
2. Hold the iron in vertical position 15-30 centimeters (6-12 inches ) away from the garment.
3. Press the Burst of Steam Button.

WARNING: Do not apply steam to any clothes or fabrics that are being worn by humans or pets. Temperature of steam is very hot and can cause burns.
SPRAY
This function can be used to remove stubborn wrinkles.

1. Fill Water Tank as described in this manual.
2. Aim the Spray Nozzle toward the wrinkled garment.
3. Press the Spray Button.
4. Iron the garment.

AUTO SHUT-OFF FUNCTION

The Auto Shut-Off function operates automatically when the iron is left untouched for 30 seconds (horizontal position) or 30 minutes (vertical position). To reactivate the iron, simply move it or turn the Temperature Control Dial to the right. The LED will return to the temperature setting it was on when Auto Shut-Off engaged and the iron will begin heating up. It may take up to 60 seconds for the iron to be ready for use.
IMPORTANT: ALWAYS disconnect your iron from the electrical outlet after use. NEVER leave the iron unattended with Auto Shut- Off in operation.

DRAIN THE WATER TANK

1. Unplug Power Cord from the electrical outlet.
2. Open the Water Tank Door and drain the Water Tank.
3.  Gently shake iron to remove any remaining water from the Tank.
4.  Close the Water Tank Door.

ANTI-DRIP SYSTEM
The anti-drip system is designed to automatically prevent water from escaping through the soleplate when the iron is cold. During use, a “click” sound may be heard from the anti-drip system, particularly during heat-up or while cooling down. This is normal and indicates that the system is functioning correctly.

BUILT-IN ANTI-SCALE SYSTEM

The built-in Anti-Scale System is designed to reduce the build-up of lime scale which occurs during steam ironing. This will prolong the working life of your iron.
NOTE: The anti-scale cartridge will not completely stop the natural process of lime scale build-up.
SELF-CLEANING
The Self-Cleaning function removes the scales and minerals built up in the Steam Chamber. The iron will remain in optimal condition if this function is performed at least once a month (or more often), depending on the hardness of water used.

1. Unplug the Power Cord from electrical outlet.
2. Move the Steam Selector to “Self Clean” position.
3. Fill the Water Tank as described in this manual.
4. Plug in the Power Cord to electrical outlet.
5. Switch on the iron and select the “MAX” temperature setting.
6. Mode Light will blink when the iron is heating up.
7. Mode Light will stop blinking and stay on when MAX temperature is reached.
8. Disconnect the Power Cord from electrical outlet.
9. Hold the iron horizontally over a sink.
10. Move Steam Knob to “Self Clean” setting.
11. Steam and boiling hot water containing scale and mineral deposits will release from the soleplate holes, cleaning out the steam chamber.
12. Gently move the iron back and forth until Water Tank is empty.
13. Plug in the Power Cord to electrical outlet and set the iron to “MAX” temperature setting.
14. When the Mode Light stays on, move the iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate.
15. Disconnect the Power Cord from the electrical outlet and position steam iron back on its heel rest. Wait for iron to completely cool down before storing.

WARNING: Do not put vinegar or other descaling agents in the Water Tank.
WARNING: Keep skin/body away from the hot water and steam.

CLEANING & MAINTENANCE

1. Disconnect the Power Cord from electrical outlet.
2. Use a damp cloth or non-abrasive cleaner to remove deposits from the soleplate.
3. Never use sharp or rough objects to scrape deposits from the soleplate.
4. Never use abrasives, vinegar or descaling agents to clean the iron.

HELPFUL IRONING TIPS

1. Sort out articles to be ironed according to the type of fabric. This will minimize the frequency of temperature adjustment for different garments.
2. If you start ironing at a high temperature and then select a lower one, the soleplate may take more than 2 minutes to cool down. To speed up the cooling process, press the steam trigger.
3. Test by ironing a small, inconspicuous part of the garment if you are unsure about the fabric type. Start with a low temperature and increase gradually.
4. Wait for 2 minutes when changing temperature settings. Temperature adjustment needs time to reach the required heat level, whether it is higher or lower.
5. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to prevent shine marks.

Troubleshooting

properly.
The temperature setting has been set to “Low”.| Set the temperature setting to a higher temperature.
No steam released.| Low water in the Water Tank.| Fill the Water Tank using instructions found in this manual.
Steam Selector is in Steam Off

position.

| Turn the Steam Selector to Steam ON position.
Steam Burst not working.| Low water in the Water Tank.| Fill the Water Tank using instructions found in this manual.
First time use.| Press the Burst of Steam Button a few times until Steam Burst is released.
No spray mist released.| Low water in the Water Tank.| Fill the Water Tank using instructions found in this manual.
First time use.| Press the Spray Button a few times until spray mist is released.
Soleplate is too cool.| Incorrect Temperature Setting.| Turn Temperature Control Dial until you reach the correct (higher) temperature setting.
Water leaks from soleplate.| Steam Iron’s heat setting is too low to produce steam.| Set temperature setting to Max position using the Temperature
Steam Selector is in the ‘ON’ position while refilling Water Tank.| Control Dial.

Turn the Steam Selector to (     )

position before refilling Water Tank.

Pressing Steam Button to many| Press Steam Button slower and press
Damage to fabric.| Temperature setting is too high.| Follow the garment guide or test the inside of the garment before ironing. Adjust temperature setting
Flakes and impurities come out of the soleplate holes during ironing.| You have been using hard water, which has caused scale flakes to develop inside the soleplate.| Perform Self-Cleaning one or more times. See “Self-Cleaning” section of this manual.

This electrical appliance complies with directive 2002/96/EC (Waste Electrical and Electronic Equipment – WEEE).

The meaning of the crossed-through waste bin symbol on the appliance is the product must be disposed of separately to other household waste at the end of the useful life of the appliance. The user is responsible for delivering appliance to an appropriate collection center at that time. Appropriate separate collection for environment-friendly treatment and recycling prevents or reduces harmful effect on the environment and human health. You can obtain information on available collection services in your area by contacting your local Council waste collection department, or the retailer from which you bought the appliance.

Warranty

LIMITED WARRANTY
IMPORTANT: SAVE THIS DOCUMENT AND KEEP IT IN A SAFE PLACE!
The SteamCraft Plus Steam Iron is warranted to be free from defects in material and workmanship. The warranty for the SteamCraft Plus Steam Iron’s wiring and electronic parts is for a period of two (2) year from the date of purchase. The warranty for all other parts of the SteamCraft Plus Steam Iron is for a period of ninety (90) days from the date of purchase. If the electronic parts and/or the other parts in the SteamCraft Plus Steam Iron, after inspection by SINGER®, prove to be defective during the applicable warranty period(s), the electronic parts and/or the other parts will be repaired or replaced at SINGER’s option, without charge, except for any expense associated with sending the SteamCraft Plus Steam Iron to SINGER®. If SINGER® sends a replacement SteamCraft Plus Steam Iron, it will carry the remaining warranty of the original SteamCraft Plus Steam Iron. This warranty may only be used by the original consumer owner of the SteamCraft Plus Steam Iron and may not be transferred or assigned.
Exclusions or Limitations

• Service under this warranty may only be obtained within the 48 contiguous states, Alaska, Hawaii and Canada.
• The SteamCraft Plus Steam Iron is warranted only for normal household (non-commercial) use. This warranty does not cover defect(s) caused by abuse, lack of maintenance or other neglect, failure to follow the care, cleaning or other instructions for the SteamCraft Plus Steam Iron, misuse, or events beyond our control.
• ANY IMPLIED WARRANTY APPLICABLE TO THE STEAMCRAFT PLUS STEAM IRON, INCLUDING WITH-OUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION OF THIS WRITTEN WARRANTY. SINGER® SHALL NOT BE LIABLE FOR CONSEQUENTIAL ECONOMIC DAMAGES RESULTING FROM BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY.
• SINGER® does not authorize any person to create for it any obligation or liability in connection with the Steam-Craft Plus Steam Iron and any of its parts beyond those set forth in this warranty.
• SINGER® disclaims liability under this warranty for any damage or defect resulting from the use of other than SINGER® parts and SINGER® approved service in the repair and maintenance of the SteamCraft Plus Steam Iron.
• This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
• Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
• Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Service under the Warranty may be obtained by returning the SteamCraft Plus Steam Iron with:

1.  This original warranty document; and
2. Proof of purchase (such as purchase receipt) to: SVP Sewing Brands LLC

If you have any questions regarding these warranties, please contact:

SVP Sewing Brands LLC
ATTN: Consumer Affairs
1714 Heil Quaker Boulevard • LaVergne, TN 37068 1-800-4-SINGER (1-800-474-6437)
E-mail: talktoUS@singer.com

Or, visit the Consumer Support Area of our website at: www.Singer.com

References

• SINGER Sewing & Embroidery Machines | SINGER®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>