DIYmall FZ3661-G72 USB GPS Module Instruction Manual
- June 3, 2024
- DIYmall
Table of Contents
DIYmall FZ3661-G72 USB GPS Module
USB GPS Module
This USB GPS Module works with windows, mac, linux, android , Raspberry pi and some cars.
- Android driver link: https://tinyurl.com/ublox-android-driver
- Ublox u center software: https://www.u-blox.com/en/product/u-center Mac, linux and raspberry pi , no need driver
- Raspberry pi setup link: https://youtu.be/A1zmhxcUOxw
- USB Sensor driver for WIN10: https://drive.google.com/drive/folders/1GYL2XF4uJD-znWuO5QrKbStqKWi-EI_Y?usp=sharing
- Download u center from https://www.u-blox.com/en/product/u-center choose For M9 products and below: Download u-center,v22.02 You can download u center user guide too.
- When you are installing u center, you will found the driver will be installed at the same time
- After installed the u center, insert the USB GPS module into the PC USB port. Check BOM port in device manager
- Open ublox u center. Click and choose COM port, please put the USB GPS module near the window or outside.
Works with google earth
Download google earth from website: https://www.google.com/earth/
Open google earth, then click Tools-GPS
- In the new window, choose Realtime, click Automatically follow the path, then click start
FAQ
Q: Where can I download USB sensor driver for win10?
- A: You can download it from here https://drive.google.com/drive/folders/1GYL2XF4uJD-znWuO5QrKbStqKWi-EI_Y?usp=sharing
Q: How to Setup GPS for Raspberry Pi
- A: Please check this video https://youtu.be/A1zmhxcUOxw
Q: Does it support PPS?
- A: No, it does not support PSS
Q: How to use on mac?
Q: Does this unit transmit data in nmea format?
- A: Yes, the data is in NMEA format
Q: Do you have raspberry pi drivers?
- A: You just need plug the gps module into the raspberry pi, then it can work, the driver already in the raspberry pi
Q: Is this a 10Hz refresh? Meeting 10 updates a second?
- A: Yes, it is 10hz refresh
Q: Will this work for real time tracking with Windows 10 Google Earth program on my laptop?
- A: Yes, it can. You need install driver first, you can download driver and document from this link https://www.u-blox.com/en/product/u-center
Q: Can i use python in raspberry pi to get the GPS data?
A: Yes you can. You don’t need drivers; the Linux kernel takes care of that by mounting the device as a Linux character mode device (hence the ‘C’ in the directory listing) and the device sends a data message including time and location every time the green light blinks. If you need help with the data format download the interface manual from https://www.u-blox.com/sites/default/files/products/documents/u-blox7-V14_ReceiverDescrProtSpec_%28GPS.G7-SW-12001%29_Public.pdf
Q: Could i integrate this into my drone for gps location information?
- A: Yes, you can, but you need code by yourself
Q: Does it work on a windows 10?
- A: Yes, it can
Q: Can it work with the iPad mini 4?
- A: Yes, it can
Q: Do i need any additional device or module to get gps location on raspberry pi or this tiny device alone would do the job?
A: Yes, this device will do what you want, as long as you have the software necessary, like an EFB, which can interpret the gps data. However I would not recommend this one, I bought one and it is not that good. I would suggest that you get the version which has the USB cable so you can plug it into the raspberry but move the actual receiver away from the Raspberry pi
References
- Your Store, DIYmall, Electronics Components supplier, provide ESP8266 ESP32 WiFi BLE Module, GPS GSM GPRS Module, Arduino-compatible products, Raspberry Pi, Micro:bit, OLED LCD TFT Nextion display, Smart car chassis kit, Tools, RC models and Toy parts etc.
- ublox-USB-android-driver.zip - Google Drive
- u-center | u-blox
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>