McGrathLocks MLSJ8015 Smart Digital Lock Instructions

McGrathLocks MLSJ8015 Smart Digital Lock

Description

This 4 in 1 digital lock uses a tubular latch 70mm or 60mm. A stylish lock with a Bluetooth App, pin code, RFID card and manual key to provide quick and convenient access.

Specifications

1. Unlocking methods: Bluetooth App, RFID Card, Passcode, Wristband or Key
2. App name: TT lock
3. Material: Zinc Alloy
4. Colour: Black, Silver
5.  Panel size: L 154(mm) W 78(mm)
6. Communication mode: Bluetooth 4.0 above
7.  Support system: Android 4.4 /IOS 7.0 above
8. Power supply: DC6V, 4pcs alkaline battery
9. Battery life: 10,000 times normal open (12 months)
10. Static current: 30Ua
11. Dynamic current: <200Ma
12. Unlock time: 1-1.5 seconds
13. IP Rating: IP66

System Specifications

Connectivity| Bluetooth 4.0, Wi-Fi (Wi-Fi Bridge required)| Case Material| Aluminium Alloy
---|---|---|---
Identification Mode| TTLock App, Card (Mifare 13.56 MHz), Code and Bluetooth| IP Rating| IP65
User Capacity| 250| Finish| Satin Nickel or Black
Identification Time| Instant recognition under 0.3 seconds| Warranty| 24 Months
Code| User-defined 6-8 digit| Dead Latch| 60mm,70mm
Keypad Backlight| Yes| Working Humidity| 10%~95%
Temporary Code or Ekey| Yes| WiFi Gateway| Available(Optional)
Compatible Smartphone| iOS7.0 or above, Android 4.4 or above| Unlock time| 1-1.5 seconds
Remote Access| Yes, Wi-Fi Gateway| Dynamic current| <200mA
Mechanical Key Override| Yes| Static current| 30uA
Micro-USB Backup Power Interface| Yes| Card Capacity| 100
Working Voltage| 6 V (4 X Alkaline AAA Batteries)| Pin code Capacity| 150
Working Temperature| -20°C~70°C| Bluetooth capacity| Unlimited
Battery Life| Up to 12 months (10,000 times access)|
Compatible Smart Home Eco-system| Alexa and Google Assistant (Wi-Fi Gateway is required)
Door Thickness| 55 – 55 mm

INFORMATION AND SAFTY WARNINGS

Introduction
This user manual will guide you through the functions and usages of our MLSJ8015 Bluetooth enabled smart lock. It is important that you follow the instructions and regard all notes that appear throughout this manual. Consult this manual before you attempt to use the lock. If you have questions not answered by this manual or are in need of non-routine service, contact our customer service (Phone Number)
Safety Warnings
When reading this manual, note these icons: notes with this icon MUST be read, understood and obeyed to prevent injury or damage.
General Usage

1. This lock shall only be used as described in this manual.
2. Verify that all parts of the lock are account for. If any parts are missing, contact our customer service.
3. In factory default status, the lock is on always open state after you install the lock (no power on). It means handle is free and lock can’t be closed, you have to power on the lock with batteries or set admin and pair the lock with app and then the open mode will be changed to private mode automatically.
4. Handle directions are reversible, please kindly follow chapter 4 (installation steps3) to change the direction. Should you have any problem, please contact our customer service.
5. There is a protective film on the front touch panel, if there are some scratches on the film, don’t be scared. The protective film can be removed if you need.
6. Use only four AA batteries. Do not mix old and new batteries or batteries from different brands. Never insert objects into the lock other than batteries as described in this manual.
7. Verify all surfaces are flat and level before beginning installation, installation on doors or surface with any types of deformity such as gaps or warping may cause the lock to malfunction or fail to operate entirely.
8. Never apply any cleaner directly to any part of the lock. Only use clean water and mild cleaner on a soft non-abrasive cloth when cleaning.
9. Potential shock warning: do not allow water or liquids to get into lock’s electric parts.
10. The lock must be used with TT lock app. The lock will function without the app but full functionality may only be achieved when the app is used.

Door Preparation

1. Check door thickness and Door Frame.Door frame≧110mm Door thickness: 38-50mm
2. Check door open direction.

1. Door drill hole map

Packing List

FEATURE

1. Outdoor lock body * 1
2. Silicon gasket * 2
3. Mounting plate * 1
4. Indoor lock body * 1
5. Single latch * 1
6. Cylindrical sleeve bolt * 1
7. Fixed pin for square spindle *1
8. Cylindrical sleeve female bolt *2
9. 80mm length Square spindle *1
10. M4 x 30mm cross flat head bolt * 3
11. M4 x 8mm cross flat head bolt * 2
12. M4 x 25mm cross flat head self-tapping screw * 4
13. Mechanical key * 2
14. Strike plate * 1
15. Latch holding plastic box * 1

Installation Diagram

Step 1
According to the map drilling holes on the door.

1.  Check the required backset (60mm or 70mm).
2. Align the template along the vertical center line of the deadbolt(E) at the desired height, and tape it to the door.
3. Mark the holes first, then start drilling.

Step 2
Install the deadbolt (E).

Note: The single latch has TWO backset options:60mm or 70mm, please adjust it by yourself.

Step 3
Install outdoor unit(A) with F & H.

Note: Cylindrical sleeve bolt F is not a must if your door doesn’t have a hole for it.

Step 4

Install outdoor unite with gasket(B) & spindle(I) on the door, Pin(G) is for fixing spindle(I).

Step 5
Install mounting plate (C) with gasket(B) on the door.

Step 6
Install indoor unit(D) on the door.

Step 7
Testing the lock by rotating back handle and using key(M).

System Reset

The reset button is on the backside of back panel, right behind the number 4 on the touchpad. Keep pressing the reset button with a piece of long and thin needle for over 5 seconds, your smart lock system will be restored to factory default settings and delete all smartphones and fobs from the memory.

Lock Boxes

Note. Both lock boxes are sold separately and need to ne welded onto the gate .

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>