Tefal BL83SD30 PerfectMix Cook User Guide
- June 3, 2024
- Tefal
Table of Contents
Tefal BL83SD30 PerfectMix Cook
Overview
- PROGRAM MILKSHAKE
- PROGRAM SMOOTHIE
- PROGRAM DESSERT
- ICE CRUSH
- PROGRAM COMPOTE
- PROGRAM HOT SAUCE
- PROGRAM MULTI GRAIN MILK
- PROGRAM STIR
- PROGRAM CHUNKY SOUP
- PROGRAM SMOOTH SOUP
- MANUAL BLEND
- PULSE
- START AND STOP
- PROGRAM CLEAN
- MANUAL HEATING / STEAM*
- – BUTTON
- + BUTTON
ASSEMBLING THE JAR 
*HOW TO ADD STEAM BASKET (depending on model part)
DISASSEMBLING THE JAR** 
DESCRIPTION OF THE APPLIANCE
- A1. Cap top
- A2. Cap seal
- A3. Cap bottom
- A4. Lid
- A5. Seal
- B. Jar
- C. Blade Holder
- D1. Motor block
- D2. Panel
- E. *STEAM BASKET
- F. Cup
- G. Brus
CAUTION: The safety precautions are part of the appliance. Read them
carefully before using your new appliance for the first time. Keep them in a
place where you can find and refer to them later on.
The appliance will only start if the jug is correctly positioned on the motor
unit (E) and the lid locked on the jug.
BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME
-
Before using your appliance for the first time, rinse the parts that come into contact with food (jug, lid and measuring cap) with soapy water
CAUTION : Do not immerse the appliance in water (neither the motor unit nor the jug base). Never put the motor unit (E) under running
USING YOUR APPLIANCE -
• Put the appliance on a flat, stable, heat-resistant surface away from sources of heat or water splashes.
• Add the ingredients into the assembled jug without exceeding the maximum level indicated:- 1750 ml max for cold thick mixture and 1250ml max for cold liquid mixture
- 1400 ml max for hot preparation
- 500 ml max of water for steam program
AUTOMATIC FUNCTION
How to use
-
Lock the lid on the jug by rotating it and place the lid cap in position on the lid. The appliance only starts up once the jug and lid are correctly in place.
-
Plug in the blender. The product makes a beep and the screen lights up.
-
The product will be immediately in standby mode. At this stage you can select a program by pressing the right program on the screen with your finger. The led will turn on on the selected program. The recipe time information will be displayed.
-
Press the start/stop button. Then the appliance starts to work automatically.
-
At the end of the recipe, the blender stops automatically. The appliance bips 5 times.
-
You can also stop the blending during the cycle:
within 1 minute of working, press the start/stop button- more than 1 minute of working, press and hold the start/stop button for 3 seconds
-
To add ingredients while blending for cold preparation only, remove the lid cap (A) from the lid (B) and add the ingredients through the feeder hole. Beware of the risk of spatter.
CAUTION : We recommend not to add ingredients while blending hot preparations. (risk of splashing). Do not remove the lid cap (A) from the lid (B) during hot preparations. It can reach high temperature and cause burns.
- Do not shake the motor unit or the jug when the blender is in use.
CAUTION: After running one program, especially long recipe, let the blender rest for minimum 5 minutes before operating it again.
These programs
are predifined on a standard basis. You can freely add extra heating/blending
thanks to the manual settings at your convenience. 
ROUGH CHOPPING SMALL QUANTITIES
Chop in a few seconds by pulsing: peanuts
Model 1400 WATT: quantity / max time :300g of peanuts / 15 seconds
COOKING FOOD
To ensure the food is cooked thoroughly and to avoid any type of
bacteriological contamination a minimum temperature and time have to be
respected depending on the type of food:
- To ensure the pasteurization of beef, pork and poultry: wait until temperature reaches 75°C during at least 2min at core of the food.
- To ensure the pasteurization of eggs: wait until the temperature reaches 75°C during at least 2min at core of the food.
- To ensure the pasteurization of vegetables: wait until the temperature reaches 65°C during at least 2min at core of the food.
- To ensure the pasteurization of fish and seafood wait until the temperature reaches 65°C during at least 2min at core of the food.
Warning:
Sensitive people like pregnant women, young children, elderly people and
immunocompromised people must take into account that some of the recipes
suggested don’t cook the ingredient thoroughly enough to kill food poisoning
bacteria.
MANUAL FUNCTIONS
-
Pulse: Press the pulse button to let the appliance run for only a few seconds at a time. To stop it, release the button. Press the pulse button as often as it is necessary.
The longest working time can not be more than 3 minutes. -
Blend: select blend program on screen then choose the speed setting with + and – buttons, validate with Start/Stop button.
Then choose timer, default time 2 min and adjust with + and – buttons, validate with
Start/Stop button the programm will start immediately. At the end of the program, the appliance bips 5 times. -
Heat : allows to freely control the way you want to heat.
Press the heat button, the screen indicates « 75° » but you can choose the heating temperature from 40° up to 100° by selecting + and – buttons. Then press Start/Stop button.
You can set up the working time by selecting + and – buttons between 5 minutes and 90 minutes, the screen indicate default time : 10 minutes. Then,
press Start/Stop button.
The remaining time appears on the screen. Wait for the blender to stop automatically. The appliance beeps 5 times. You can also stop the blending during the cycle :- within 1 minute of working, press the start/stop button
- more than 1 minute of working, press and hold the start/stop button for 3 seconds.
-
Steam: Add the ingredients in the steam basket. Add 500ml of water in the jar. Then add the steam basket in the jar and close the lid. Maintains heat /steam button for 2 seconds. The pictogram will become yellow You can set up the working time by + and -buttons, between 5 minutes and 90 minutes. Then press Start/Stop button.
The remaining time appears on the screen.
Wait for the blender to stop automatically,
The appliance bips 5 times. For safety reasons, remove the cap and wait
1 minute to remove excess steam.
Depending on model
OTHER FUNCTIONS
-
Start/Stop : allows to stop any blending or heating program before the end by pressing this button. You can also stop the blending during the cycle :
-
within 1 minute of working, press the start/stop button
-
more than 1 minute of working, press and hold the start/stop button for 3 seconds
If the appliance switches off during operation, proceed as follows : -
Unplug and leave it to cool down for approximately 15-20 minutes.
-
Reconnect the appliance to the power supply and resume blending.
-
The appliance will keep the program in memory for 3min if stopped
-
CLEANING
- Clean the jug immediately after use.
- For easy cleaning, you can use. Deep clean: Put 800ml of water in the jug. Select the cleaning program on the screen and press Start/Stop button Wait for the end of program. Finish cleaning the jug with the help of a sponge.
- Rinse the inside of the jug and the lid under running water.
- Rinse the inside of the jug and the lid under running water.
- In the event of the heated part of the jug getting extremely dirty, fill in the jar with a mix of water and washing up liquid and let it soaked for a few hours to help get it clean.
- Use a damp cloth to clean the motor Unit. Dry it carefully.
- You can use the brush to clean the blade holder. Be careful, the blades are very sharpened.
- Empty the preparation, the jug is not meant for storing food in the refrigerator or freezer.
- To clean the outside of the motor unit and the walls of the jug, use a damp cloth.
- Do not immerse the appliance in water (neither the motor unit nor the blade holder). Never put the motor unit (E) under running water.
- Refer to the cleaning table to check how to clean each part.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
If your
appliance is still not running properly, please contact the customer service
department for your country.