Electrolux E7CB1-50CW Explore 7 Compact Blender Instruction Manual

: June 5, 2024
: Electrolux

Table of Contents

Electrolux E7CB1-50CW Explore 7 Compact Blender
INSTRUCTION MANUAL
COMPONENTS
**Instructions
How To use
How To Clean
SAFETY ADVICE
GETTING STARTED
CLEANING AND CARE
RECIPES
DISPOSAL
CUSTOMER CARE AND SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Electrolux E7CB1-50CW Explore 7 Compact Blender

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.

INSTRUCTION MANUAL

Electrolux-E7CB1-50CW-Explore-7-Compact-Blender-fig1

Graphics and drawings in this manual are solely for illustration purposes and are subject to variations from actual product. Read all instructions carefully before using the appliance for the first time. Keep this manual for future reference.

COMPONENTS

Blender base
Suction feet
ON/OFF-button
Mini jug
Blender blade assembly, with sealing ring
The base for blender blade assembly
Mini jug lid with filler hole
Measuring cup
Take away bottle*
Drinking lid with carrying handle*
Cooling stick*
Multi-chopper jar*
Multi-chopper blade assembly, with sealing ring*
Base for multi-chopper blade assembly*
Ice Crush button
Smoothie button
“Speed 1” button
“Speed 2” button
PULSE button
Certain models only

**Instructions

**

Electrolux-E7CB1-50CW-Explore-7-Compact-Blender-fig3

How To use

How To Clean

Electrolux-E7CB1-50CW-Explore-7-Compact-Blender-fig12

SAFETY ADVICE

Remove and safely discard any packaging materials before using the appliance.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Keep the appliance and its power cord out of reach of children. Children should be supervised to ensure that they do not play with the appliance.
Cleaning and maintenance should not be performed by children unless they are supervised.
The appliance can only be connected to a power supply which voltage and frequency comply with the specifications on the rating plate.
Never use or pick up the appliance if the power cord is damaged and/or the housing is damaged.
If the appliance or its power cord is damaged, it must be replaced by Electrolux or its service agent in order to avoid hazard.
Do not immerse the appliance, its power cord or plug in water or any other liquid.
Do not use or place the appliance near the edge of the table or counter, near hot gas, stove, electric burner or heated oven.
Always place the appliance on a flat, level and dry surface.
Always switch off the appliance and disconnect it from the power supply if it is left unattended and before changing of the accessories, cleaning or maintenance.
The blades and inserts are very sharp. Danger of injury. Care shall be taken when changing accessories, after use and during cleaning and maintenance.
Never touch the blades or inserts with your hand or with any utensils while the appliance is plugged in and/or during operation.
Do not attempt to remove the blade assembly.
Keep hands and utensils away from the appliance during operation to avoid the risk of severe injury to persons or damage to the appliance.
Ensure that the appliance is switched off before removing the jug from the motor base.
Do not operate the appliance without food or liquid in the jug.
Never operate the appliance without the lid.
Do not use the appliance continuously for more than 1 minutes when processing heavy load.
The jug cannot be used for blending or grinding hard and dry substances, except for ice cubes. Use the multi-chopper to grind hard and dry substances (Eg. nuts, candy, rice etc…)
Be careful if hot liquid is poured into the appliance as it can be ejected out of the appliance due to a sudden steaming.
Never process boiling liquids (max 90°C).
Do not exceed the maximum filling volume as indicated on the appliance.
Do not use this appliance to stir paint. Danger could result in an explosion!
Do not let the power cord come into contact with hot surfaces or hang over the edge of a table or counter.
Never use accessories or parts made by other manufacturers not recommended or sold by Electrolux as it may cause a risk of injury to persons.
This appliance is for indoor use only.
This appliance is intended for domestic use only. Electrolux will not accept any liability for possible damage caused by improper or incorrect use.
If the appliance is left on without using any speed or programs, it will automatically switch off after 5 minutes.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

GETTING STARTED

Before using your appliance for the first time: Remove all packing material such as plastics, stickers or tags that may be attached to the housing, bowls or attachments. Clean the appliance and accessories, see instructions: “Cleaning and Care”.
Prepare the ingredients: Rinse ingredients thoroughly. Cut the ingredients into 4 to 6 pieces and remove any hard or large seeds. Remove any thick peel from the fruit or vegetables.
Place the blender blade assembly (E) on the top of the blender blade assembly base (F) and tighten the jug (D) until it firmly locks into position. Place the assembled jug on the blender base (A) and rotate it clockwise until it locks into position. (The jug can only be placed in one position). When locked, the symbol on the blade assembly base should be aligned with the symbol on the blender base. Put the ingredients in the jug. (Do not exceed the maximum level as indicated on the jug.)
Caution! Always place the sealing ring around the blender blade assembly before operating the product.. Use only sealing rings provided by Electrolux.
Close the lid by aligning the lever on the lid with the handle of the jug. Insert the measuring cup. (You can add ingredients through the filler hole after you started processing. Never remove the measuring cup or the lid while running the product.)
Caution! Never run the blender empty. When processing hot liquids, see step 5.
Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before filling the jug. Fill the jug only half full and start processing on low speed. The blender jug can become very warm – take care to protect your hands and to ventilate steam out through the filler hole. Always replace the lid before use.
Start the blender: Plug into mains. Press the ON/OFF button (C), the buttons will light up. Press the speed 1 or speed 2 button, to select your desired processing speed.
Caution! Keep hands and utensils out of the blending jug while blending. Never run the blender empty, running the blender empty can cause overheating and damage.
You have preset speeds (1, 2), dedicated recipe programs, and Pulse mode to choose from. The selected speed or recipe program will light up. The blender will operate until the program is finished. To stop any program manually, press any button.
You can give the ingredients a quick mix to get to your desired consistency with the Pulse function. Press the PULSE button(S) to go into Pulse mode. The PULSE and the speed buttons start blinking. Press 1 or 2 to pulse at different speeds.
The product comes with a variety of recipe programs. You can choose between Ice crush (O) and Smoothies (P). The blender will stop automatically when the program is ready.
USING THE MULTI-CHOPPER ( CERTAIN MODELS ONLY)
Turn the multi-chopper (J) upside down, with the open end facing upwards. Carefully remove the base for blade assembly (N) by rotating it clockwise, then remove the blade assembly (M). Fill the multi-chopper jar with the desired ingredients. Do not fill more than half full. Place the multi-chopper blade assembly (I), followed by the multi-chopper blade assembly base on the open end of the jar and rotate clockwise to fasten the jar. Turn the multi-chopper the right way up and lock into place on the blender base by rotating clockwise.
Caution! Always place the sealing ring around the blender blade assembly before operating the product. Use only sealing rings provided by Electrolux!
Note: When locked, the symbol on the multi-chopper blade assembly base should be aligned with the symbol on the blender base.
Caution! The blades are very sharp!
USING THE TAKEAWAY BOTTLE ( CERTAIN MODELS ONLY)
Fill the ingredients in the takeaway bottle (I). Place the blender blade assembly (E) on the open end of the jar and tighten the blender blade assembly base (F) by screwing it on the jar. Turn the take-away bottle upside down. Place the assembled takeaway bottle onto the blender base (A) and rotate it clockwise to lock until it clicks into position.
Note: When locked, the symbol on the blender blade assembly base should be aligned with the symbol on the blender base.
Caution! The blades are very sharp!
USING THE COOLING STICK ( CERTAIN MODELS ONLY)
The cooling stick keeps your smoothies cool for longer. Unscrew the cap of the cooling stick (K) and fill it with tap water. Screw the cap back on the cooling stick and place it in the freezer until the water freezes.
Place the frozen cooling stick in the take away bottle. Pour your freshly prepared blend into the take away bottle (I) and fasten with the drinking lid with carry handle (J). The cooling stick can be cleaned in a dishwasher.

CLEANING AND CARE

To avoid crazing of the jug, always rinse the jug with only clean water right after usage. This is to prevent acids or essential oils from the ingredients that may attack the plastic material. After rinsing the jug, it can be washed by hand with detergent, or placed into the dishwasher for cleaning. Avoid leaving the ready dishes (e.g. soup, smoothie, juice) in the jug for a long time, especially when acidic ingredients (e.g. lime, lemon) is processed. However, if crazing would appear, the effect is purely cosmetic and it does not have any impact the integrity of the jug.
Always rinse the jug thoroughly with only clean water before placing it to the dishwasher. Quick cleaning: Pour warm water into the jug, add a few drops of detergent. Mix water and detergent by pressing the PULSE button then speed 2 button a couple of times. Finally, rinse the jug under running water. www.electrolux.com
Thorough cleaning of the blender base and interface: Switch off the blender and unplug the power cord. Wipe the blender base with a damp cloth.
Warning! Never immerse the blender base, plug, or cord in water or any other fluid.
Thorough cleaning of the jug: Note! The Blade assembly is not removable. Remove the lid and measuring cup. Rinse the blade assembly in water and detergent.
Caution! Handle carefully, the blades are very sharp! All parts, except for the blender base are dishwasher safe.
Enjoy your new Electrolux product!

RECIPES

When using the multi-chopper to chop ingredients like onions and shallots, cut the ingredients into cubes no bigger than 2.5 cm to get the best result. Ingredients with tough textures such as carrot and celery are not recommended for chopping.

MAXIMUM PROCESSING TIME	MAXIMUM CAPACITY
1 min	500 ml

RECOMMENDED BLENDING SPEED

Recipe| Ingredients| Quantity| Time| Speed setting

Pureeing raw vegetables

| Carrots| 20~80| g|

30 s

|

2

(Max speed)

Potatoes| 20~80| g
Onions| 20~80| g
Water| 60~120| g

Pineapple-apricots Smoothie

| Pineapple in slices| 200| g| |

2

Dried Apricots| 20| g
Yoghurt| 250| g
Soup for mini jug| Carrots| 250| g| ≤ 60 s| 2
Water| 350| ml
Soup for take away bottle| Carrots| 210| g| ≤ 60 s| 2
Water| 290| ml

Raspberries Smoothie

| Frozen raspberries| 150| g|

Program set

|
Banana (½ pcs)| 50| g
Water| 50| g
Yoghurt| 250| g

Milkshake

| Milk| 100-200| ml|

Program set

|
Vanilla Ice cream| 100-150| ml
Banana| ¼ – ½| pcs
Chocolate syrup| 30-60| g

Potato leek soup

| Potatoes| 60| g| |

2

Leek| 60| g
Water| 180| g

Chunky guacamole

| Firm-ripe avocados| 2| pcs| |

PULSE + 1

Red onion| 1| pcs
Fresh cilantro leaves| 1/4| cup
Fresh lime juice| 1 and 1 1/2| tbsp
Salt| 1| pinch
RECOMMENDED BLENDING SPEED

Recipe| Ingredients| Quantity| Time| Speed setting

Chunky pesto

| Fresh basil| 30| g|

≤ 30 s

|

2

Olive oil| 108| g
Pine nuts| 16| g
Minced garlic| 10| g
Salt| 6| g
Grated Parmesan cheese| 50| g
Grated Romano cheese| 30| g
Butter| 42| g

Semi-smooth hummus

| Canned chickpeas| 200| g| |

2

Lemon juice| 2| tbsp
Garlic cloves, crushed| 2| pcs
Ground cumin| 1| tsp
Salt| 1| pinch
Tahini (sesame seed paste)| 1| tbsp
Water| 4| tbsp
Extra virgin olive oil| 2| tbsp
Paprika| 1| tsp
MULTI-CHOPPER FUNCTION

Maximum volume for multi-chopper cup: 400 ml| Maximum dry grinding time: 30 s
Ingredients| Maximum Quantity| Time| Speed setting
Coffee| 60 g| 20-30 seconds| 2
Dry shrimp| 50 g| 10 seconds ON + 3 seconds OFF (2 times)| 2
Dry chili| 20 g| 10 seconds ON + 3 seconds OFF (2 times)| 2
Fresh chili| 50 g| 10 seconds ON + 3 seconds OFF (2 times)| 2
Pepper corn| 100 g| 10 seconds ON + 3 seconds OFF (2 times)| 2
Dry anchovy| 50 g| 10 seconds ON + 3 seconds OFF (2 times)| 2
Raw rice| 100 g| 10 seconds ON + 3 seconds OFF (2 times)| 2
Five spice| 50 g| 10 seconds ON + 3 seconds OFF (2 times)| 2
Garlic| 50 g| 5 seconds ON + 3 seconds OFF (5 times)| 2
Nuts| 80 g| 5-10 seconds| 2
Almonds| 80 g| 5-10 seconds| 2
Onions| 100 g| 5-10 seconds| 2
Beef| 100 g| 5-10 seconds| 2
SYMPTOM| CAUSE| SOLUTION
---|---|---
The blender does not switch on.| Jug/base are not fixed properly.| Check if all the components are in correct position. Note! the jug can only be placed on the base with handle towards the user interface.
The ON/OFF-button is not pressed.| Press the ON/OFF button to switch on the blender. The control panel will illuminate when the blender is switched on.
The motor has overheated. The display is blinking.| Wait until the product has cooled down and all the buttons are lit.
The plug is not properly connected to the power outlet.| Check the connection of the plug to the outlet or try another outlet.
Power outage.| Wait until power outage is over.
Functional problem.| Contact authorized service.
The motor stalls during operation| | If the motor stalls, switch off the blender immediately, unplug the

appliance and let it cool for at least 10 minutes.

Ingredients are too large.| Cut all firm fruits and vegetables into pieces no larger than 1.8 cm² to

2.5 cm².

Wrong ingredients.| The appliance intended use is production of beverages. Add fruits, vegetables or similar.

Never mix ingredients such as dough, mashed potatoes, meat or similar in the mini jug.

If the appliance is still not working, please contact Electrolux Customer Service.

DISPOSAL

Recycle the materials with the symbol. Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal nice.

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.Due to the Electrolux policy of continual product development; specifications, colours, and details of ourproducts and those mentioned in this manual are subject to change without notice.