AZEADA PD-S800 Portable Bluetooth Speaker Instructions
- June 5, 2024
- AZEADA
Table of Contents
AZEADA PD-S800 Portable Bluetooth Speaker
Product specifications
- Bluetooth: V5.0
- Support:A2DP V1.3,AVCTP V1.5,HFP V1.6,HSP V1.2
- Working distance:10M
- SNR:≥80db
- Battery: 1200mah
- Normal volume playing time:3H~5H
- Speaker driver: ¢45mm*1
- Power: 4Ω/5W *1
- Frequency response:80HZ-15KHZ
- Unit size:8080126MM
- Carton meas:60PCS/CTN
- Charging:5V/1A
- Accesorries: One Charge cable
Product Feature
- International advanced bluetooth chip and circuit design techniques, support all wireless devices.
- With Hi-Fi speaker, to make sure the clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is 10 meters.
- Beat-Driven Light Show: The wonderful light react and phase in time with the beat.
Key and slot function
- Press long for power on/power off.When play music(USB card/TF card/Bluetooth/line in), short press for “play/pause “., press short to search station automatically, press again to stop searching. Under bluetooth mode with mobile paired , press short to answer a call , press again to hand up, press twice to ring up a call.
- Press short for light mode switch.
- When play music, press short for last song, long press to turn down the volume.
- When play music, short press to switch the mode(USB card/TF card/Bluetooth/line in).
- When play music, press short for next song, long press to turn up the volume.
- Type-c charging port.
- 3.5mm line in.
- USB slot: It can decode and play MP3 format audio when put the USB card into the slot.
- TF slot: It can decode and play MP3 format audio when put TF card into the slot.
FCC Statment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment