mifo O5 Plus Smart True Wireless Bluetooth 5.2 Earbuds User Guide
- June 5, 2024
- Mifo
Table of Contents
**
**
**MIFO O5 Plus Smart True Wireless Bluetooth 5.2 Earbuds
**
OVERVIEW
Remove both earbuds from the charging case to trigger automatic pairing. When
pairing is successful, the right earbud indicator will flash, signaling the
earbuds are ready to pair with your device.
Follow the steps outlined on the next page to pair the earbuds with your
Bluetooth device.
NOTE: Please keep the earbuds in close proximity during this process to
ensure fast and accurate pairing.
Pairing with a Bluetooth device for the first time
Check to make sure Bluetooth is active on your device and the device is able
to discover new devices. Remove both earbuds from the charging case, and
connect to mifo_OS PLUS/mifo_05. The earbuds will provide an audio prompt
indicating pairing is successful.
Hot-swapping between mono and dual-mode
- Ensure both earbuds are paired with your device successfully.
- You may now remove a single earbud and use it. To add the second earbud, remove it from the case.
- When using both earbuds, you may place either earbud in the charging case, or turn either earbud off without interruption.
Charging case power indicator
The charging case includes a primary indicator light centered between the left
and right earbud charging ports to signal the remaining case power. The
indicator light will activate for several seconds when an earbud is placed
into the case, and automatically turn off after a short period of time. By
noting the color of the light according to the table below, you can quickly
determine if the case should be recharged.
NOTE: With a USB C to USB adaptor, you can connect to an emergency charge
for your phone.
On-earbud button functions
The earbuds feature power-saving features, and will automatically turn off if
not connected to a device for 3 minutes.
- Hold for 1 second: Power on
- Hold for 5 seconds: Power off
- Press once: Play/ Pause music
- Press once: Answer/ Hang-up
- Press twice: Reject a call / Voice assistant
- Hold for 25 to active /close ambient sound mode
- Hold the”-” button for 2 seconds: Previous track
- Hold the “+” button for 2 seconds: Next track
- Press the” -” button: Volume down
- Press”+” button: Volume up
NOTE: In the rare event that pairing fails between the earbuds or your device you may attempt to initiate a reset. Press and hold the power button on either earbud for 8 seconds until the indicator flashes pink and purple.
Important information about the earbuds
Please read the below information regarding the care of your product and your safety.
- Loud sounds may cause hearing loss. Maintain a safe listening volume and duration. Consult your physician to understand the appropriate volume and duration to avoid hearing loss.
- Maintain awareness of your surroundings. Earbuds may block ambient noise.
- Do not use this product while operating a vehicle or heavy machinery.
- Keep out of reach of children.
- Not rated for use in dishwashers, laundry machines, or other cleaning devices.
- If ear pain or discomfort results from the use of this product, please stop using it and immediately consult a physician.
- Do not store at temperatures below -15 degrees C (5 degrees F) or above 55 degrees C (131 degrees F).
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>