acer H6523BDP Smart Projector Smart System User Guide
- June 5, 2024
- Acer
Table of Contents
Acer H6523BDP Smart Projector Smart System
SMART FUNCTIONS
Acer Smart Projector
The Acer Smart Projector comes with a powerful and easy-to-use media center
where you can wirelessly project any content from your iOS, Android, or
Windows-based device, access and projects various default apps that are
installed to the projector, manage and organize the media center Home page
according to your preferences, and more.
Getting started
To control the media center interface, use the supplied remote control or
Bluetooth mouse (not supplied) or Acer smart remote APP (Page. 5)
Initial setup
Note:
-
The SMART mode is loaded by default after you start the projector. If you are using any other source and wish to switch to the SMART mode, press the SOURCE button on the projector keypad or on the remote control, and then select the SMART option.
-
If you plug in or unplug the Wi-Fi dongle, please restart the projector. If you are using the projector for the first time, you will be prompted to select the following options during the initial setup:
-
Select your preferred language and click Next.
-
Select your preferred Wi-Fi network and click Next or set up the wireless connection later and click Skip.
Note:
If the selected Wi-Fi network is secured, you are prompted to enter a password. Enter the password and then click Connect to continue.
-
Scan the respective QR code on the screen with your Android or iOS device to access and install the wireless projection app collision. Then click Done to complete the initial setup.
-
SMART FUNCTIONS
Acer Smart Remote Guideline
Step 1: Connect the Acer smart device and the smartphone with Acer Smart
Remote to the same network.
Step 2: Open “ Acer Quick Settings” and check the IP address.
Step 3: Key in the IP address of Acer smart device to the connection window,
and select the “PAIR” button.
Step 4: Connection success and the control panel would be available to use.
Basic Functions
-
Mute
-
Volume Up
-
Volume Down
-
Introduction
-
Back: Back to the previous page.
-
Home: Back to launcher home page.
-
Keyboard
-
Voice Input
-
Swipe on the navigation control panel: Control-focused item.
-
Swipe on the mouse control panel: Control mouse cursor.
-
3D mouse control: Hold the smartphone and change the phone position on control the mouse move. Tap on control panel: Select/ Click
-
Long press on the control panel: Show shortcut key (Included home and back key)
-
Smart mode: You can smoothly control the apps on your device.
-
Normal mode: When Normal mode is on, control modes can be switched through the toggle button. Mouse mode: UseA a touchpad control the mouse cursor.
-
Navigation mode: Use touchpad control focus.
Note: -
The specific button may show up according to different apps.
-
Acer Smart Remote only support Android device.
Remote control layout
Note:
- Functions vary depending on model definition.
- This feature will cause control compatibility issues depending on a different level of app support.
- Remote controller depend on models.
Home page overview
After the initial setup, the media center Home page will open:
Navigating the Acer Smart Projector Home page
The items on the Home page can be accessed by using the remote control or
Bluetooth mouse or Acer smart remote APP.
Note:
- The projector keypad supports the media center depending on the models.
- File management supports to read the USB disk, depending on the models.
SMART FUNCTIONS
- Remote control:
- Press HOME to access the Home page from any other page.
- Press the four-direction navigation buttons (t/u/p/q) to select items.
- Press ENTER to confirm the selection, open an item, or play/pause media content. Press BACK to move to the previous page or exit the app.
- Press MOUSE to switch the remote control to the remote mouse mode.
- Bluetooth mouse:
- Hover the cursor over the item you wish to open and left-click to open it.
- Right-click to exit a menu or app.
- Right-click repeatedly (if necessary) to access the Home page from any other page.
Configure system settings
To configure Android system settings, click Setting on the Home page.
Select a menu item to configure its preferences.
Network & Internet
Note:
Before configuring the network settings, make sure the Wi-Fi dongle is
connected to the USB port on the rear of the projector. To connect the
projector to an available Wi-Fi network, do the following:
- Slide the Wi-Fi switch from Off to On.
- Select your preferred access point from the Wi-Fi list and click on it to make the connection.
Note:
If the selected Wi-Fi network is secured, you are prompted to enter a
password.
Note:
In the Network & Internet menu, you can also view Wi-Fi data usage, add
Virtual Private Network (VPN), and configure Private DNS mode settings.
Connected devices
Connect to a Bluetooth keyboard, Bluetooth mouse, Bluetooth remote
controller, and manage connection preferences.
Apps & notifications
View recently opened apps, configure apps notifications, permissions,
uninstall apps, and access settings.
Display
Adjust the display brightness, select a wallpaper, set a sleep timer, font
size, and access advanced display settings.
Storage
View and manage storage usage.
Security & location
Set the screen lock, configure privacy settings, device admin apps, encryption
and credentials, and enable or disable screen spinning.
Accounts
Add an Owner account and enable or disable apps to auto-refresh data if you
make any modifications to the Owner account.
Accessibility
Configure text-to-speech output, display font size and display size,
magnification settings, enable or disable large mouse pointer, removing
animations, cursor dwell timing, screen auto-rotation, and more.
System
Configure Android keyboard settings, system date and time settings, backup
options, reset options, and advanced system settings.
Note:
-
Before updating the projector to the latest system version, please make sure the network connection is stable enough. Click on System updates option, and the update window will pop-up. Click to confirm to start the update process. During the system update, make sure the network connection is stable and the power cord is well plugged in.
Step 1:
Check if the system needs to be updated. If not, the following message is displayed on the screen
Step 2:
If the system needs to be updated, follow the onscreen instructions.
WARNING -
During the update process, do not disconnect the power cord from the projector. Disconnecting power while updating may result in system failure.
-
To reset the entire system to the factory default settings, click RESET TABLET in Reset options > Erase all data (factory reset).
About
View system-related information, such as legal information, Android
version, and more.
Aptoide app
Aptoide app is a pre-loaded app store that allows you to install and discover
apps easily in a safe environment. Access games, streaming apps, configure
Aptoide settings, and more.
Note:
- To use Aptoide app, make sure the projector is connected to the Wi-Fi network.
- Apps that are not pre-loaded by Acer may not be compatible or work properly.
- Some apps may require a keyboard and mouse.
- Some apps may be region-specific.
- Users can install third-party apps by .apk file in the File Management or Web Browser. However, some third-party apps may have compatibility issues.
- For better compatibility with Aptiode, it is recommended not to update the Aptoide app version at all.
Accessing apps
You can access apps directly from the Home page or from the APP List. To view
and access all the default apps, click APP List on the Home page.
Click directly on the app icon to open the app.To add the app shortcuts to the Home page for quick access, do either of the following:
- Click and check up to two apps.
- Click Add APP and Back on the Home page directly and check up to two apps.
Note:
depending on models.
Adding apps to favorites
You can favorite apps for quick access. To favorite apps, do the following:
- Click My Favorite on the Home page.
- Click and check up to 12 apps to add them as favorite apps. When the app is selected as a favorite, 2. Click and check up to 12 apps to add them as favorite apps. When the app is selected as a favorite, the star next to it turns from gray to yellow
To remove the app from the My Favorite list, simply uncheck it.
Note:
depending on models.
Web browser
Use the Web browser/Lightning to browse through the web pages on the
Internet. Click Web Browser on the Home page. 
Wireless display app
Via the Wireless display app, you can wirelessly cast your Android or Windows
device’s screen to the projector. Click Wireless display on the Home page to
start the wireless display service. For more information on wireless
projection, refer to “Wireless projection support” on page 17.
Note:
- The wireless display service requires an Internet connection. Make sure the projector is connected to the Wi-Fi network. For more information, refer to “Network & Internet” on page 10.
- The wireless display does not support a mirroring streaming app.
- If you want to use the mirroring function, please refer to CollaVision (WPS) Wireless Projection Support app that supports iOS, Android, and Windows. Please find more information in CollaVision (WPS) Wireless Projection Support User Manual.
- The compatibility of the mobile device with the Wireless display app is not valid for all mobile device brands. If you encounter any compatibility issues, please contact the mobile device manufacturer.
For Windows:
- Open the Action Center and select Project.
- Select Connect to a wireless display.
- A scan for wireless display devices will start. Select your desired wireless display device.
- Once connected, your Windows device should now be mirrored by the wireless display.
For Android:
- Open the Settings app.
- Tap on Connected Devices to open the menu.
- Select Connection Preferences from the list of options.
- Tap on Wireless Projection for Android.
- Select your desired wireless display device.
- Tap on the device you want to pair with.
Wireless projection support
Via the CollaVision app, you can wirelessly cast your Android, iOS, or
Windows device’s screen to the projector.
Note:
Please find more information in CollaVision (WPS) Wireless Projection Support
User Manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>