Car Key Fob Keyless Entry Remote fits 2007-2014 Chevy Tahoe Suburban-Complete Features/User Guide

Car Key Fob Keyless Entry Remote fits 2007-2014 Chevy Tahoe Suburban

Specifications

• DIMENSIONS : ‎25 x 0.5 x 2 inches
• WEIGHT : 1 ounce
• FITS P/N: OUC60270, OUC60221
• MODEL : 13
• BRAND: USARemote

Introduction

USARemote car key fob is a replacement part, which is required in case the original key fob is lost or damaged. The car key fob is a small handheld device which is used to control the locking and unlocking of your device remotely and keyless. When you press any button on the key fob, a radio signal having a short range is transmitted, this signal is a uniquely coded signal. The signal is received by the received present in the car, which responds to the command which is mostly either to lock or unlock the doors.

The USARemote car key fob comes in compact black enclosure and features a total of 6 buttons which can be used to carry out the various operations. Two of the buttons are dedicated to lock and unlock the doors of the car. One button is for opening the trunk of the car and the other is to close it. The button present at the top is used for starting the car. The red button with the speaker sign is the panic button which when pressed results in the continuous beeps of the car. It is compatible with the following:

GMC
2007-2014 Yukon (includes XL 1500 and 2500)

Chevrolet

• 2007-2014 Tahoe
• 2009-2017 Traverse
• 2007-2014 Suburban
• 2007-2013 Suburban (includes 1500 and 2500)

Cadillac

• 2007-2014 Escalade
• 2007-2013 Escalade EXT
• 2007-2014 Escalade ESV

PROGRAMIMING INSTRUCTIONS

Use this Procedure for Vehicles with Driver Information Center Buttons This information s in your Owner’s Manual in the Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays.
3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays.
4. Press and hold the lock and unlock buttons on the keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
5. To program additional remotes at this time repeat step
6.  This vehicle can have a maximum of eight remotes programmed.
7. To exit programming mode turn the key off and remove the key. Test remote(s)

Use this Procedure for Vehicles without Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with the key in the on position (as far as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays
2. Press and hold the trip odometer reset stem for three seconds. The message REMOTE KEY LEARNING ACTIVE will display
3. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
4. To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.
5. To exit programming mode turn key off and remove key. Test remote(s).

FREQUENTLY ASKED QUESTIONS

• Is this fob a GM OEM product or is it after-market?
  It is an after brand which is very simple to program.

• What color is G-427?
  The color of the key fob is black.

• How do you get the back off to change the battery?
  In order to change the battery, remove the FOB from the key ring. Take a small flat head screwdriver. Place it between the seam of the two pieces and twist to open.

• I have a 2007 GMC YUKON XL, would this key work for it?
  Yes, it is compatible with 2007 GMC Yukon XL.

• A working link to the set-up instructions?
  You find the instructions above.

• What if only one remote works?|
  This doesn’t happen, both the remotes are programmed easily. If you have further issues contact the manufacturer.

• Does this fob come with a battery?
  Yes, this fob comes with a battery.

• Does each fob take 1 battery?
  Yes, each fob key takes only one battery cell.

• Can I program it myself for a 2009 GMC Yukon?
  Yes, you must be able to program easily using the previously mentioned steps.

• What is each button for?
  ** The buttons are for auto-start, lock, unlock, rear glass, lift gate and panic.
  **

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>