ELPROSYS DiagProg4 Professional Diagnostic Tester Instruction Manual

DIAGNOSTIC TESTER

Diagnostic tester
Instruction Manual
Software

LEGAL RESERVATIONS AND AGREEMENT OF USE

Once the Diagprog4 device is switched on user should select a language from the list of the supported languages.
Language selection will result in the change of language in the entire menu.

User should review LEGAL RESERVATIONS and AGREEMENT OF USE. By selecting the Agree – accept button user accepts AGREEMENT OF USE and the Diagprog4 device will switch on.

It is necessary to accept AGREEMENT OF USE each time device is switched on.

MENU NAVIGATION ( MULTI-TOUCH SCREEN)

Simple gestures — tapping or pressing with fingers — is enough to select menu options.

In order to navigate the menu using the keypad press Accept button to activate it and fully use the keypad.

MAIN SCREEN

To navigate the main screen please use main screen icons or top/bottom buttons on the keypad.

MAIN SCREEN ICONS

ICONS

|

FUNCTION

|
---|---|---
| Cars| Selection of a car model
| Motorbikes| Selection of a motorbike model
| Other| Selection of a quad, scooter, tractor model
| Tools| Basic Tools
| Setup| Basic Setup
| Information| Information about Diagprog4
| Special programs| Runs special/diagnostic functions
| VIN programs| Read the car’s VIN number. Car selection based on VIN number.
| Accept Icon| Allows to accept
| Cancel Icon| Allows to cancel
| Top Icon| Allows to MOVE UPWARDS in the menu
| Bottom Icon| Allows to MOVE DOWNWARDS in the menu

KEYPAD

The keypad below the multi-touch screen is another way to navigate the DiagProg4 menu.

KEYPAD – BUTTONS

BUTTONS| FUNCTION|
---|---|---
|  Accept Button| Button to ACCEPT
|  Cancel Button| Button to CANCEL
|  Top Button| Button to MOVE UPWARDS  in the menu
|  Bottom Button| Button to MOVE DOWNWARDS in the menu

MENU ICONS – DESCRIPTION

| DIAGNOSTICS| | EEPROM READ/WRITE
---|---|---|---
| SERVICES – ADVANCED EDITING| | FLASH READ/WRITE
| DIAGNOSTICS AND REPAIR OF CAR MODULES| | ADVANCED DIAGNOSTIC FUNCTIONS
| IMMOBILIZER| | FUNCTIONS FOR ADVANCED USERS
| CLEAR CRASH DATA| |

MENU ICONS – description

DIAGNOSTICS| Automotive diagnostics e.g. read and clear trouble codes DTC, service, module identification.
---|---
SERVICES – ADVANCED EDITING| Service inspection – reading, writing, editing
DIAGNOSTICS AND REPAIR OF CAR MODULES| Option diagnostics and repair of car modules
IMMOBILIZER| Immobilizer
CLEAR CRASH DATA| Clearing accident data
EEPROM READ/WRITE| Reading and writing EEPROM content
FLASH READ/WRITE| Reading and writing FLASH content
ADVANCED DIAGNOSTIC FUNCTIONS| Advanced diagnostic functions
FUNCTIONS FOR ADVANCED USERS| Functions for advanced users

SETUP

SETUP MENU FEATURES

seek active technical support
DEFAULT SETTINGS| Restoring the device to the original state once initially used
DOWNLOAD UPDATE/ ACTIVATION| Allows users to check for new updates/ activations
INFORMATION| Information about DiagProg4
LANGUAGE| Menu language selection: Polish, English, German, French, Italian, Spanish, Portuguese, Brazilian
MAINTENANCE| File synchronization between device and files on the server
OBDII/VOLTAGE TEST SETTINGS| Power supply to the connected module and OBDII connector
OTHER SETTINGS| Settings modification: e.g. contrast, volume
POWER SAVING| Switch ON/OFF screensaver
SECURITY| DiagProg4 additional security measures
TESTS| Tests available for the user
WIFI SETTINGS| WIFI settings modification

SUBMENU INFORMATION

Diagprog4
OPEN-SOURCE LICENSE| Information about Open-Source license  DiagProg4

SUBMENU TESTS

test
MULTIPLEX TEST| MULTIPLEX test

TOOLS

activations
EEPROM PROGRAMMER| Write EEPROM memory
EXTERNAL UNIT POWER| Power supply to the connected module
HEXEDITOR| File editing in hexadecimal system
J1850 ANALYZER (Internal use only)| Programs For Internal Use Only
K-L ANALYZER (Internal use only)| Programs  For Internal Use Only
MICROCONTROLLER PROGRAMMER| Write  FLASH + EEPROM
RESTART DIAGPROG4| Immediate restart in order to reload the operating system
RESTORE THE BACKUP MODULE| Restore backup file saved on SD card
SENDING LOG FILE| Send *.LOG file to ElproSys server for technical support
SUPPORT SCRIPT| Runs support script prepared for the user by the technical support team
UDS COMMUNICATION CONTROL| Enables/ disables  UDS communication
UNIT CALCULATOR| Enables metric conversion

 MENU – SUBJECT OF PROGRAMMING

Menu – Subject of programming can be Menu for CARS, MOTORBIKES, and OTHER VEHICLES.

EXEMPLARY PROGRAMMING MENU

EXEMPLARY PROGRAMMING

Exemplary programming of Alfa Romeo \ 146/146 \ ST5249

BASIC SETTINGS

WIFI settings
Select SETUP , next select WIFI settings from the menu, and connect to a WIFI network.

Select the available WIFI network and enter a password.

If the WIFI network connection is correct then information about the network will be displayed next time WIFI SETTINGS are selected until the device is disconnected from the network.

Information about WIFI enabled by default is stored on an SD card. Without an SD card device will not remember the WiFi network.
LANGUAGE settings
Select SETUP , next select LANGUAGE from the menu, and accept with the OK button.

SENDING LOG FILE
If any error occurs during module programming DiagProg4 sends a LOG file to the ElproSys server for
Technical Support.
SENDING LOG FILES MANUALLY
Select TOOLS , and next select SENDING LOGFILE from the menu.

Sending a LOG file is only possible when the device is within the WIFI network range.
If the LOG file is sent successfully message will be displayed on the screen.
LOG file can be sent using dedicated software – DiagProg4 Manager.

DIAGPROG4 MANUAL UPDATE

Connect DiagProg4 to PC via mini USB cable (Linux, Unix, Mac OS, Android, or Windows), it will appear as an additional external drive.

Save the update.pdf file, received directly from ElproSys or its representative in the main folder of the microSDHC card, and restart the device which will be automatically updated.
DiagProg4 can be updated using dedicated software – DiagProg4 Manager.

MAINTENANCE

MAINTENANCE enables remote maintenance of the device in order to ensure optimal technical parameters.

Once the MAINTENANCE option is selected device will automatically run the microSDHC card test and will synchronize files with the Elprosys server. Before you start make sure to:
– insert microSDHC card
– connect DP4 to the WIFI network (Internet)
File synchronization can be completed using dedicated software – DiagProg4 Manager.

DISPLAY FIRMWARE UPDATE

Display firmware update is downloaded automatically.
The user has to select from the DP4 menu:
SETUP → OTHER SETTINGS → TFT Update
Estimated installation time: around 1 minute

IMPORTANT: Do not turn off the power supply before finishing the update.

RESTART DIAGPROG4

If the device screen does not respond to touch, it is possible to restart it to restore its efficiency.
Press and hold buttons – up and – cancel for at least 3 seconds to restart the DiagProg4 device.

DIAGPROG4 MANAGER

DIAGPROG4 MANAGER – PC tool
DIAGPROG4 MANAGER connects DiagProg4 with PC, allowing data synchronization between devices.
Software used to manage devices using PC.

DiagProg4 connection with PC:
It is required to use a mini USB cable supplied by the manufacturer in order to connect DiagProg4 with the PC.
DiagProg4 should be connected to an additional power source.

| Software update| Use this option to download the latest update and activations from the Elprosys server.
---|---|---
| File synchronization| Use this option to download necessary data files (BSI, Flash, etc.) from Elprosys server
| Technical support| Use this option to send data – like LOG file, activation status etc. required to seek  technical support
| MicroSD card manager| Use this option to view memory card data
| Info about DiagProg4| Use this option to view device details
| Info about DiagProg4 Manager| Use this option to view information about the DiagProg4 Manager

System requirements:
Operating system: Windows Vista, Windows 7, Windows 8, Windows 10.
RAM: 1 GB (Recommended)
Free disk space: At least 2 GB (Recommended)
Software requirements: .Net Framework 4.5 or above

DESCRIPTIVE MENU

Some DiagProg4 functions will show additional hints. When a position is selected from the menu device will display an additional descriptive menu. In order to display a hint select a  position from the menu, press it and hold it.

RECORD OF CHANGES

OF USE
03.03.2016| Czupryna Sylwester| The software number (SN) is displayed on the main screen.
03.03.2016| Czupryna Sylwester| New „DIAL’ icon replacing the „VIN” icon on the main screen
03.03.2016| Czupryna Sylwester| Change in SETUP MENU — adding new positions:
– MAINTENANCE – OBDII/VOLTAGE TEST SETTINGS
03.03.2016| Czupryna Sylwester| Change in SUBMENU INFORMATION —** adding new positions:

– CONTROL NUMBER
– AGREEMENT OF USE
– DP3 LICENSES IMPORT

03.03.2016| Czupryna Sylwester| – OPEN-SOURCE LICENSE

Change in TOOLS MENU — adding new positions:
– SENDING LOG FILE
– RESTART DIAGPROG4

03.03.2016| Czupryna Sylwester| Adding description for option: SENDING LOGFILE manually
03.03.2016| Czupryna Sylwester| Adding description for option: MAINTENANCE
03.03.2016| Czupryna Sylwester| Adding description for option: RESTART DIAGPROG4
03.03.2016| Czupryna Sylwester| Adding description for option: DESCRIPTIVE MENU
03.04.2017| Czupryna Sylwester| Change in TOOLS MENU — adding new positions:

– DOWNLOAD UPDATE/ ACTIVATION
– SUPPORT SCRIPT
– UDS COMMUNICATION CONTROL

03.04.2017| Czupryna Sylwester| The Hardware version is displayed on the main screen.
03.04.2017| Czupryna Sylwester| Adding additional language: Brazilian
03.04.2017| Czupryna Sylwester| Adding DISPLAY FIRMWARE UPDATE
03.04.2017| Czupryna Sylwester| Adding DIAGPROG4 MANAGER — PC tool
07.02.2019| Czupryna Sylwester| Display firmware update
20.03.2019| Czupryna Sylwester| Change in the programming menu
| |
| |
| |
| |
| |
| |

©Elprosys
April 2019 − Rev. 3.1

References

• DiagProg4 diagnostic tester for cars

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>