Shenzhen Hotack Technology D042H Portable Projector User Manual
- June 5, 2024
- Shenzhen Hotack Technology
Table of Contents
Shenzhen Hotack Technology D042H Portable Projector User Manual
-
Android mobile phone screen mirroring: Follow the instruction in Miracast
-
IOS device screen mirroring: Follow the instruction in 10S Cast
Security
- Please do not disassembly and change any parts of the projector privately. Please find the professional personnel for machine maintenance.
- Please do not use the projector on blanket, pillow and other soft materials to keep the normal heat dissipation of the machine.
- Please do not use the projector near the river, or in high temperature or highly dust polluted environment.
- Do not touch the AC power adaptor or the projector with wet hands.
- Do not look directly into the lens to avoid the strong light hurt your eyes.
- Do not put any heavy stuff on the projector.
- Do not press the lens or subject the body to collision or excessive shock.
- Please use the original power adapter to charge the projector.
- Projector power off if take projector away from the place.
Disclaim
This manual is general instructions, The pictures and functions in this manual
should subject to the actual product. Our company is devoting to
improve product performance, we reserve the right to modify product functions
and interface described in this manual without notice.
Please keep your device properly. We are not responsible for any loss caused by wrong operation of software/hardware or repairing or any other reasons. We are not responsible for any loss of any third party claims.
This manual has been carefully checked by professional engineer, please understand for any inevitable omissions.
Please do not look directly into the lens when projector is working, or the strong light may harmful for the eyes or cause any discomfort. Juveniles should use the projector under the supervision of adults.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>