GAGGENAU DF270101 60cm 200 Series Dishwasher User Guide
- June 5, 2024
- Gaggenau
Table of Contents
GAGGENAU DF270101 60cm 200 Series Dishwasher User Guide
Before using for the first time, read the instruction manual and the safety information it contains.
Setting up Home Connect Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.
-
Install the Home Connect app on your mobile device and follow the instructions.
-
Scan the QR code with the Home Connect app.
http://qr.home- connect.com?aG9tZWNvbm5lY3Q6Ly9vcGVuUGFpcmluZz9wc2V1ZG9WaWI9U00wMQ==
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here. A table of country-specific units can be found in the instruction manual.
Programmes
The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. The runtime will change if the rinse aid system is switched off or rinse aid needs to be added.
How to use your appliance
-
Load the tableware.
Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely. -
Add detergent.
-
Switch on the appliance .
-
Select the programme.
-
Start the programme Start .
-
Remove the tableware at the end of the programme.
-
To cancel the programme, press Reset 4 sec. for approx. 4 seconds.
The programme is cancelled and ends after approx. 1 minute.
Cleaning filters
Cleaning spray arms
Clean wastewater pump
Troubleshooting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>