Shenzhen Yunqi Youkong Intelligent Equipment YQ156001 Smart Wi-Fi Photo Frame User Manual
- June 5, 2024
- Shenzhen Yunqi Youkong Intelligent Equipment
Table of Contents
Smart WI-Fl Photo Frame
Yunqi Youkong Intelligent Equipment YQ156001 Smart Wi-Fi Photo Frame
1. POWER
After connecting power adapter, please press and hold power button for
approximately 5 seconds (until screen turns on). When it is on, press and hold
power button for approximately 3 seconds to access reboot or power off menu.
Short press on power button will turn off/onscreen (but leave the photo frame
in on position).
2. MiniUSB
Connect a USB flash drive. USB is for service use only.
3. Earphone Jack
4. SD card
Load external max 64GB microSD memory card here.
S. DC
Connect DC adapter to power on the device.
6. USB
Type A Load USB Flash Disk Here
Getting started
Thank you for purchasing your very own frame. First, to set up your frame
follow the ‘Quick start guide’ included in the package. If you are new to
using frameo then start by following the frameo quick setup on page or follow
the on screen guide when powering it on for the first time.
Once you have set up your Frame frame, start connecting it to your friends and family. Frame app To send photos to your frame, use the frame app for iOS or Android
Frame app
To send photos to your frame, use the frame app for iOS or Android
Find the frame app on:
Google Play by searching for “frame” or scan this QR code
https://play.google.com/store/apps/details?id=net.frameo.app
App Store by searching for a frame or scan this QR code
https://itunes.apple.com/WebObjects/MZStore.woa/wa/viewSoftwareid=1179744119&mt=8
Frame quick setup
When starting your frame for the first time, you will need to set up the
frame.
- First, you start by selecting a language. This will be the language used throughout the frame.
- Connect your frame to the Internet by connecting it to Wi-Fi. If a newer version of the frame software is available, then you will be prompted with an update dialog. It is
- recommended to update your frame immediately if prompted.
- Enter your name, and the location where you have placed your frame e.g. “Living room”, “Kitchen” or “Office” and finally set the timezone if not correct.
Start using frames
Start by connecting with your friends and family by providing them with a
unique code from your frame.
If you want to be able to send photos to the frame yourself, start by downloading the app for iOS or Android on App Store or Google Play. Then use the code to connect your frame and app as described below.
Connecting a new friend :
- Make sure that your friend has downloaded and installed the frame app
- Click the add friend icon on your frame. A dialog will appear showing a unique code that is valid for 12 hours.
- Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone call, to your friend.
- Once your friends have added the code in their frame app, they will automatically appear on your frame and be able to send you photos.
Navigating your frame
You interact with your frame through its touchscreen.
Swipe left or right to go through your photos.
To access the menu bar, simply tap once on the screen, this will show the menu. In the menu, you will find quick access to the add friends dialog and the settings menu . From the menu, it is also possible to hide the currently shown photo and to adjust the positioning of the photo.
Settings
Through settings, you can personalize your frame to your needs.
My frame
Frame name:
Changes the name of your frame. This is also the name the connected friends and family will see in their list of connected frames.
Frame location:
Changes the location of your frame. This is the location displayed on your friends and family’s list of connected frames which can help to distinguish frames from each other.
Set language:
Sets the language throughout your frame.
Set time zone
Sets the timezone that should be used on your frame.
Sleep mode: frameo offers a sleep mode which turns off the screen to
reduce power consumption while you e.g. are sleeping. Its default setting is
to turn off the screen at 23:00 and turn on the screen again at 07:00. To
change this just set the sleep mode start/end time.
Your frame is not powered down or in standby, so you will still be able to
receive photos during sleep mode.
Manage photos
Show/hide photos:
Select which photos to hide by tapping the particular photos you wish to hide.
Hidden photos will NOT be deleted from your frame, you can always select them
to be shown again.
Use to hide or show all photos.
Delete photos:
Select photos that you want to permanently delete from your frame by tapping
the photo. Use to select or deselect all and to delete the selected photos
Import photos:
Allows you to import photos from an external max 32GB SD card. Before you try
to import photos from a SD card, make sure you have a SD card with photos on
inserted into your frame.Start by selecting the photos that you want to import
onto your frame.
Once selected tap the import button to start the import process. It is
currently not possible to add a caption or define the most important part of
the photo when using the import function. Alternatively, add yourself to your
friend list and send them using the app.
My Friends
This list contains all the people that are allowed to send photos to your
frame.
Remove person
To remove a person from this list, thereby removing their permission to send
you photos, tap the delete icon . You will then be asked to confirm the
removal and if you would like to remove all photos received from this person.
To allow a new person to send you photos, simply tap the add friend button + •
a and share the presented code in whatever way you prefer.
Add person
To allow a new person to send you photos, simply tap the add friend button and
share the presented code in whatever way you prefer.
Display and slideshow
Timer
Define the duration a photo should be displayed.
Show caption
Sets whether or not to display the captions that your friends have sent with
the photo. Check to display captions. Uncheck to hide captions.
Brightness level
Adjust the brightness level of the screen.
Wi-Fi
Set which Wi-Fi the frame should be connected to. If you are connecting to a
network with a captive portal a web browser icon should appear in top right
corner of the screen. Use this to open a browser where you can enter
credentials to access the network.
Backup and Restore
Backup frame to max 32GB microSD card.
Tap to make a backup of your photos, friends and settings. The time of latest
successful backup will be displayed.
Any existing backup on the SD card will be overridden!
Automatic backup
If checked, your frame will automatically take a backup within 30 hours of you
receiving new photos or making changes on your frame. Restore from backup
Before you attempt to restore your frame, start by confirming that your backup
is up-to-date.
To restore from a backup, you must first reset the frame. It is important to
note that you cannot restore to a new Frameo frame and keep the old frame
operational at the same time.
Reset frame
Removes all data from your frame. This will permanently remove all your
photos, friends/connections and settings.
About
Check for update
Check if an update is available for your frame.
Share anonymous analytics data
Sharing anonymous analytics data helps us tremendously with improving the
frameo software. We understand if you do not wish to share this data with us.
Set checked if you wish to help us improve frameo. Set unchecked to deny the
sharing of anonymous analyt ics data.
Guide
Opens the quick start guide, that was shown when you first started the
frame.
Privacy
For more information regarding privacy, please visit
http://privacy.frameo.net
Warning:
This device complies with Pan 15 of the rec Rules. Operation is subject to the
following two conditions: (I) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. NOTE: This equipment has been
tested and found to comply with the limits for a Class A digital device,
pursuant to Part I5 of the FCC Rules. These limits arc designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates. uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions. may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an aide’ on a circuit different from that to which the receiver is connected.
- Consult the deal or an expel oriented tadio/TV technician lot help.
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter
RI Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines. This equipment
should be installed and operated with a minimum distance of 20cm the radiator
your body. This device and its antennas) must not be co-located or operated in
conjunction with any other antenna or transmitter
Smart WI-Fl Photo Frame
Documents / Resources
|
Shenzhen Yunqi Youkong Intelligent Equipment YQ156001 Smart Wi-Fi Photo
Frame
[pdf] User Manual
YQ156001, 2A6L2-YQ156001, 2A6L2YQ156001, YQ156001 Smart Wi-Fi Photo Frame,
YQ156001, Smart Wi-Fi Photo Frame
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>