esenses KSW-80 Kids Smart Watch User Manual
- October 30, 2023
- esenses
Table of Contents
esenses KSW-80 Kids Smart Watch
Product Information
This product is a wireless device that operates on radio frequencies to transmit and receive data. It is designed to be used for communication and data transfer purposes.
Product Usage Instructions
- Connect the device to a power source using the provided power cable.
- Turn on the device by pressing the power button located on the device.
- Follow the device’s instructions to connect it to your desired network.
- Once connected, you can use the device to transfer data or communicate with other devices on the network.
- To turn off the device, press and hold the power button until the device powers off.
- Keep the device away from water and other liquids.
- Do not disassemble or modify the device as this may damage it and void the warranty.
- Follow all applicable laws and regulations when using this device.
Items of insert in package and specifications
Items of insert in package:
- Watch 1x
- USB Cable 1x
- Instruction 1x
- SIM Kits 1x
Specifications:
- Product: Kids Smart Watch
- Charging Volt: 5V
- Working Temperature: -20°C-60°C
- Networks supported: 2G GSM, 3G WCDM and 4G TDD/FDD-LTE
Operation manual
Get a Nano SIM card
- Prepare for a Nano SIM card firstly and the phone card package should include internet flux and voice call. You can buy it from local telecom operators. Please inquiry presale customer service if you have any questions
- The SIM card must support 4G network with data streaming and airtime.
How to install SIM card?
- Draw out SIM card tray, then chipset side face up and put into the tray.
- Power on the watch till signal catching.
Download the APP
- Open your Wechat and scan the QR code below, download and install it.
- Or searching APP name: SeTracker from Apple store or Google Play to down load and install it.
Register
When the installation is completed, start to register your personal account
.
- Register code: ID number or register code, not IMEI number
- Account: Your monitoring phone number
- User Alias: baby’s name
- Password: set a password in six numbers (do not forget
- Select APP language: Choose your location (HK, Europe and Africa, Asia and Oceania, North America and South America)
Log in
After registration, try to log in.
- Input your account and password
- Select APP language: Choose your location (HK, Europe and Africa, Asia and Oceania, North America and South America)
Add device
Pls go to Me to find device list, and scan Reg code (in watch menu or stick on
watch backside ) to add your watch.
Verify successful bundling with watch
Pls go to Find Watch to verify watch bundling well, it means watch and APP
connection successfully.
Setting
Log in and find the setting, click the phone book or contacts and save the
numbers you need. The same goes for the other functions.
- Set a SOS number(Mum/ Dad / Brother?)
- Only those numbers saved in phone book or contacts have the privilege to call the watch, suggest adding baby’s friends too.
- You should save the numbers in App, then the watch can call out these numbers.
- Remember to click the save button.
Calling
- A. Call from watch:
1. use your finger slide the screen from left or right side to find phone book interface, click it then will see phone numbers saved by APP, and then choose the number you need to call.
2. Long press button 1, it will automatically call 3 SOS numbers one by one until get answer, if not then will call second round.
3. short press button 1 to cancel the call.- B. Phone call the watch: dial your kid phone number to make calling, press button 2 to receive call and press button 1 to cancel.
Location
- Turn on the watch and make sure that it got signal.
- Open the map on APP, click the location then it will shows your baby’s real-time position.
Notes: If the watch is indoors, it usually positions itself via LBS or
WIFI, and the deviation is inevitable, which depends on the distance between
the watch and Base Station and the environment as well.
Remind: GPS location for outdoor depends on models, it is not mandatory
feature for all models, pls double check with your sale center or customers
service.
Game
Eight games are installed in the watch.
-
NiniaRunning
How to play: You need to collect as many coins as possible and jump over platforms, Don’t fall or hit the columns, or game over! Press once to jump press twice for a big jump.
-
God of weath
How to play: Click on the screen to move the car and catch as many airdrops as possible. You have three chances.
-
Brave Monkey
How to play: Click the left or right side of he monkey to let the moneky jump to the left or right to avoid the branches on the tree, the monkey cannot touch the branches, otherwise game over.
-
Car
How to play: Press and hold the car to move around to switch lanes. The car in front may drop gold coins and eat as much gold coins as possible. To avoid a crash you only have one chance. You can turn music on or off and view scores. -
Plane
Protect your planet from enemy attacks. Destroy them all before they reach your ase. How to play: Click on the screen to move the fighter to shoot, you need to hit twice to destroy the enemy score as much as possible! You have three chances.
-
Block
How to play: Destroy all bricks to progress to the next level. White bricks give a special 3-ball bonus. Blue bricks need to be hit 2 times. Score as many points as you can!
-
Math Game
How to play: Click start and will show the math judge question, must need to choose “YES” or “NO” before the top color box disappear, you have only one chance. You can set the “Easy”, “Normal” and “Hard” modes to turn music on or off and view scores.
FAQ Center
Few points need to be confirmed about the SIM card
- Has GPRS Network
- Has 4G data streaming
- Can show callers ID
FAQ:
-
Even if you inserted the SIM card, it still got no signal.
-
Check the card’s type and size to see if it’s right, also check if the card has 4G network.
-
Check the card to see if it’s inserted properly. First shut down the watch, second, insert the card, then reboot.
-
When you save the numbers it indicates that the device can not connect the network.
-
Is there any signal after inserting the card, please check, and can the watch rings when receiving a phone call.
-
Check whether the watch is on or not. (before using the APP, the watch must be on).
-
Make sure that the SIM card has the data package and make sure you have paid the phone charge and the SIM card is available to call.
-
Check whether the watch ID match the ID on the tags or not.
-
If still not working, please send pw, 123456,ts# to the number inserted in watch, then your phone will receive a message from your watch, please send the message and the rear cover of the watch to your local dealer, they will solve this problem as soon as possible.
-
When you call the watch, it reminds you the number you have dialed is busy, please try again later.
-
Is there any signal after inserting the card, please check.
-
Please check vou have saved phone numbers on your APP.
-
Check If you have turn on the DO NOT DISTURB in App and set a time, if yes, please switch to OFF.
-
The time can not update automatically.
When you manage inserting the card(must have data ), the watch will update the time automatically, which might take few minuets. If not, please send pw, 123456, servers, 121.43.19.219,8089# via your phone to the watch, once your phone got answer, reboot the watch. -
The positioning function is not working.
-
Go outside and try again. (For GPS location checking only !)
-
Once the watch goes to SLEEP MODE, it will switch to SAVE POWER MODE, which means the function of uploading data is OFF, at this time, you can refresh the positioning and shake the watch to wake it up.
-
Neither charge nor boot
The battery enter into a self-protection mode, do as the following step by step: -
Try another USB Cable to see if the original one was damaged.
-
Press the POWER key for 50 seconds, then recharge, it will indicate recharging on the watch after 1 minutes, at this time you can reboot.
-
If still not working, the watch has a recovery time, after two days, it has no power and then recharge it, it should be work.
-
No voice on watch or phone.
Check the volume + – while calling. If the watch switch to max. still no voice, the speaker must damaged, it need be repaired. -
The watch can receive any call.
Apply to your local operator for a function of showing callers ID. -
When use the watch to call, it indicates that can not connect
Check the GSM signal, it shows on the screen. If not, maybe your SIM card has loosened, try to reload again. -
How to remove PIN lock screen after install SIM card.
Please set smartphone to remove, Setting > Security&Privacy > Set SIM lock, then turn off “Lock SIM card” as per below picture.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm full interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Specific Absorption Rate (SAR) information:
This Device meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health. FCC RF
Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg
averaged over one gram of tissue. Device types: Device has also been tested
against this SAR limit. This device was tested for typical body-worn
operations with the back of the device kept 0mm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories that maintain an
0mm separation distance between the user’s body and the back of the device.
The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC RF exposure requirements,
and should be avoided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>