NADCO NC-64TC Turkish Coffee Maker User Manual
- June 5, 2024
- NADCO
Table of Contents
NADCO NC-64TC Turkish Coffee Maker
GENERAL AND TECHNICAL SPECIFICATION
TURKISH COFFEE MAKER
- 1-4 cups brewing capacity
- Double-sided coffee pot (suitable for right and left-handed use)
- Energy transmission base
- Start button and status light
- Brewing detection sensor
HOW TO USE
-
Insert the plug. Your appliance will tum on automatically and the status light will
tum into white. -
According to the above-Suggested scales, firstly add coffee than sugar, and then water to the cooking coffee pot. Slightly mix with a spoon
Note: For a delicious coffee make sure the interior of the coffee pot is clean
- Your appliance can make coffee for up to 4 persons at a time as your cup sizes may vary, pay attention not to exceed water, coffee, or sugar mixture beyond the MAX level line in the coffee pot otherwise coffee may not brew well and/or boil over the coffee pot
- Place the coffee pot in the appliance
Note: If you do not place the cooks coffee pot to its spot correctly your appliance will not start brewing
- Press the start button located on the front panel
- The appliance will give a warning sound beep lo starting and the status light around the start button will tum into red
- Brewing duration:
- AMOUNT: COOKING DURATION
- 1 PERSON 1-1.5 MIN
- 2 PERSON 2-3 MIN
- PERSON 3-4MIN
- PERSON 4-5 MIN
Note
The duration of brewing may vary depending on ambient water temperature and main voltage. In the subsequent brewing process, the duration may shorten as the appliance will be hotter.
- A1 brewing process has finished your appliance will give a warming beep and the red status light turns into white and goes into sleep mode. You may completely tum off your appliance by plugging it out.
- After cooking you can serve your coffee by pouring it into the cup.
Note: In order to prevent the residue of foam and coffee grounds in the coffee pot shake the coffee pot slightly and then pour.
- If you wish to cancel the brewing process for any reason, just press the start button
CLEANING AND MAINTENANCE
- Before deaning, unplug the appliance and wait for the coffee pot to cool down. Wash the coffee pot under tap water by removing it from the appliance and dry out the bottom, exterior, and sides with a dry fabric.
- Dry out the main body as well as the exterior side of the coffee pot where the energy transmission base is located only with dry fabric, never plug it wet or wash in the dishwasher.
- Do not dean any of the appliance accessories with harsh and chemical dealers (bleach, hydrochloric acid, etc) except the dealers used for this type of device.
- Do not use abrasive dealers’ metal objects, hard sponges, wire brushes, or harsh dealers to dean the appliance.
- Wipe the cooking sensor with a wet fabric. after each use
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>