16GB Digital Voice Recorder Voice Activated Recorder for Lectures Meetings-Instructions

: June 5, 2024
: Aiworth

Table of Contents

Aiworth

Aiworth

16GB Digital Voice Recorder Voice Activated Recorder for Lectures

Meetings

16GB Digital Voice Recorder Voice Activated Recorder for Lectures
Meetings

Specifications

COMPATIBLE DEVICES: Personal Computer,
BRAND: Aiworth,
HARDWARE INTERFACE: MicroSD, 3.5mm Audio, USB 2.0,
MICROPHONE FORM FACTOR: Built-In,
FORMAT: MP3 AUDIO, WAV, WMA,
HEADPHONES JACK: 3.5 millimeters,
NUMBER OF BATTERIES: 1 Lithium-ion batteries required,
ITEM DIMENSIONS LXWXH: 3.81 x 1.25 x 0.49 inches,
MEMORY STORAGE CAPACITY: 16 GB ,
ITEM WEIGHT: 2.4 Ounces

Introduction

The E36 voice recorder features a dual sensitive microphone and a professional recording IC that supports up to 1536Kbps PCM recording and produces a crystal-clear recorded voice as if the speaker were standing right next to you. It has high-quality recording feedback. It has high battery and memory capacity. It has a built-in 800mAh rechargeable battery that allows for continuous recording for up to 45 hours. E36 supports up to 32GB TF card expansion and voice-activated recording and has a 16GB flash memory that can save up to 1160 hours of recording files. It has a simple design, simple to use, and has free software upgrades for life. Aiworth’s most user-friendly voice recorder, with all operation buttons on the front side and smartphone- like logic.

Control buttons

16GB Digital Voice Recorder Voice Activated Recorder for Lectures
Meetings

Right channel sound hole
Headphone jack
Lock
Reset
Menu
Delete/A-B
Lanyard hole
Volume up button
Stop/Escape button/Save button
Pause/Play button
Rewind/Previous file button
Volume down button
Screen
Record
Fast forward/Next file button
Bellmouth orifice
Left channel sound hole
Line in jack
USB port
TF card socket

Charging

Connect the recorder to your computer via the USB cable (Supplied). Insert the micro-USB end to the recorder, and the USB end to the USB port of a running computer. When, the recorder is charging, the screen will show electric quantity at top right. The battery will be fully charged after about 3hours and then can work 70 hours.

Turn the Power On

When the machine is in a dormant state, long press boot.
When the machine is asleep, press the “REC” key, turn on the machine and start recording.

Turn the Power OFF

When the machine is in shutdown, press off.

How to record

In the standby mode, press the “REC” machine to enter the recording state, press the button to save the recording file, press , pause the recording, and then functions by “lock key”.
In sleep, long press REC to boot and enter the recording state, short press will save the recording file, short press pause recording, you can lock other key function by “lock key”.
Place the recorder so that the built-in microphones face the direction of the source to be recorded. The new file will be automatically recorded as e last file in the current folder.

Play

Music player: after booting, press the “M” button to switch to music mode. Press the play button the music file.
Voice play: after booting, press the “M” button to switch to the voice mode, press the to play the recording file.

AB Repeat play

In playback state, short press “deletes” a screen display “A” in the flash, said to enter the repeat mode, and then press the delete key once, the screen shows “B” in the flicker, expressed as the starting point of the repeat section, press “delete” “A” the “B” section of the end point and repeat, repeat play in the range of A-B. Press again “delete” once, exit the A-B repeat then mode.

Erase

Standby mode short press “M” button to enter the main menu, press” forward icon “reverse icon” to “select” “delete files”, short press in a short press ” exit.
Short press “+”,”- “select “single deletion”, press to enter, press “+”, “- “, ‘”yes no”, press ‘ to confirm, press short “, and then exit.
Short press + or – select “delete all”, press to enter, press “+” or “-“, select “yes/ no”, press “” to confirm, press short”” then exit.

Memory location

1.In the standby mode, short press “M” button to enter the main menu, press” forward or reverse icon”.

Select “memory location”, short press in a short press “” exit.
Press “+”| “-“, select “TF”, “Flash”, and press to save. At this point, the recording file is stored according to the storage location of your choice, and short press ” ” is exited.

Record-setting

In the standby mode, short press “M” button to enter the main menu, press” forward or reverse button. Select “recording settings”, short press in a short press “exit.
Enter the “library”, press” +”/ “- “to select the recording files you want to play, press short, press ” ” to exit. 3. Short press “reverse and forward button” choose the “recording format”, short press “+” or” – ” choose “WAV”, “MP3”, press “” to confirm the save, short press “” exit, then according to the audio file, you set the audio format recording.
Short press the reverse or forward button to choose the recording bit rate”, Short press to enter when choosing “WAVRec”(256kbps/512kbps/1536kbps)/”MP3Rec” (32KBPS/64KBPS/128KBPS) shortpress “+” / “-“, short press to confirm the save settings. Press the to exit.
Short press “forward”, “reverse” select “voice” mode, shortpress to enter, press “+” / “-” select “normal mode /voice mode “short press” confirmation to save the settings, press the “” exit, then according to the mode of your recording tape setup.
Short press “forward and reverse button, select “recording source option, press “play” to enter, press “+”/ “-” select “microphone line-in”, short press to confirm the save settings, press the “” exit, then the tape will be set according to your recording the source of the recording.
Short press “forward and reverse button”, select recording light switch” option, press “” to enter, press “+”/ “” select open/close”, short press “” to confirm the save settings, press the “exit, when choosing the recording light off “when recording when the indicator light is turned off, when the choice of recording light” on” when recording flashing lights.

Playback settings

In the standby mode, short press “M” button to enter the main menu, press “forward and reverse button” ‘select “Settings”, short press in a short press exit.

Set Date and Time:

Set time

Short press “+” / “-” select “time settings”, short press to enter, press “+” / “-” select “set time format”, short press” to enter, press “+”/ “-” select “12 hour /24 hour.” Short pressto confirm the save setting, press exit.
Short press “+” / “-” select “set time”, short pressto enter, press “+”| “-” digital regulation, short press “forward and reverse button ” regulation digits, short press” ” to confirm the save settings, press the kit.