AUFERO Laser 1 Laser Engraving Machine Review & Analysis Instruction Manual
- June 5, 2024
- AUFERO
Table of Contents
Assembly Manual
AUFIERO LASER 1
Features
- Aufiero Laser 1 is a small desktop laser engraving machine, known for its humanized experience, safety, complete functions, and stable quality.
- Aufiero Laser 1 is equipped with an OLM-PRO-V1.2 motherboard, which is the third-generation laser motherboard with richer functions and supports Ortur offline controller.
- There is a G-sensor on the mainboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop.
- Laser beam safety protection. If your computer system stops or the USB cable is disconnected, the laser engraving machine will stop moving and the laser beam will stop to prevent fire.
- Exposure time detection and limitation. When the laser engraving machine is working, if the motor does not move, this additional safety function will turn off the laser to prevent fire.
- Our Laser 1.83 firmware supports the fastest engraving speed of 3000mm/min.
- The laser module comes with an adjustable safety cover, which can be adjusted up and down as needed.
- Portable structure, easy to assemble, and easy to use.
Tips
- Please place the laser engraving machine in a fireproof area and keep a good ventilation environment; If possible, we recommend that you buy a fire extinguisher and place it near the machine.
- Do not leave the laser engraving machine unattended when it is working, and the operator must pay attention to it to prevent the engraved material from catching fire.
- Do not operate the laser (laser goggles) without eye protection, it will damage your eyes.
- Do not touch the laser beam with your hands or other objects you don’t want to touch. If used improperly, it may cause serious bodily injury.
- The machine must avoid violent impact.
- Keep minors (especially your children under 14 years old) away from this laser engraving machine; Without adult direct supervision and proper eye protection, minors of any age should not use this machine.
- Please do not touch the heat sink. When the laser engraving machine stops working, it may burn your hands.
- Use the laser engraving machine in a room that can be closed by a door, and make sure that neither the laser beam nor astigmatism can penetrate the window.
- When using a laser engraving machine, use the doorplate or warning light on the door to indicate that the laser engraving machine is running.
Install LU2-2 Laser Module
Install LU2- 4-SF Laser Module
Install LU2- 4-LF Laser Module
https://www.youtube.com/channel/UCvfgW64X
BwJH7yd0E79s8Dg|
https://ortur.tech/support| https://www.instagram.com/orturofficial/|
https://twitter.com/OrturOfficial
https://www.facebook.com/groups/orturusergroup|
https://ortur.tech/feedback| https://www.facebook.com/realortur|
cchttps://ortur.tech/auferolaser1/
Dongguan Ortur Intelligent Technologies Co., Ltd.
Address: No. 1 Building, Ruijin Science and Technology Industrial Park,
Changping, Dongguan 523558, Guangdong, China
Read User Manual Online (PDF format)
Loading......