PerfectPrime AI200 Thermal Imaging Face Recognition System Instruction Manual
- June 5, 2024
- PerfectPrime
Table of Contents
PerfectPrime AI200 Thermal Imaging Face
Recognition System
Instruction Manual
Overview
AI200 Thermal Imaging Face Recognition System is suitable for office areas, hotels, access gates, office buildings, schools, shopping malls, stores, communities, public services, management projects, and other places that require rapid access and temperature measurement.
Product Features
- Imported high-precision and high-resolution thermal imaging modules
- High frame rate camera, high-definition pictures can be taken when the human body is moving fast
- It comes with an 8-inch touch screen, which can be used directly without an external display, or it can be connected to a large HDMI screen
- Support simultaneous identification and temperature measurement of 20 people at the same time
- Easy to use, ready to use after power on, built-in black body
- It comes with high-definition alarm prompts, supports direct export of reports, and stores 50,000 records offline
Precautions for use:
The temperature measurement ambient temperature range is between 10℃ to 35℃. This product is not used as a medical device. Please turn on the electric heater for more than 15 minutes before using this machine. This product can be used outdoors!
Product Specifications
Screen
Size
Brightness
Resolution
Touch screen| 8 inches, IPS LCD screen
500 LU
800*1280 HD screen
Capacitive touch screen
---|---
Camera
Resolution
Number of cameras
Type
Aperture
Focal length
Focus
White balance
Wide dynamic| 200W, 1080P
1
RGB camera
F2.0
6mm
Fixed
Automatic
Support
---|---
Interface
Video
Relay output
Network Interface
4G interface
USB| HDMI2.0 Type-A interface 1
1 relay interface
1 RJ45 10M/100M adaptive Ethernet port, WIFI
Support (optional accessories)
1 way USB interface
---|---
Temperature measurement function
Face Detection
Temperature measurement distance
Temperature measurement accuracy
Temperature range
Resolution of the temperature measurement module
Direct release if the temperature is normal
The body temperature alarm value can be set
Wear a mask to identify
Body temperature over temperature alarm
| Supports detection and tracking of 20 people at the same time
1 to 5 meters
≤ ±0.3 ℃ within 2 meters,
3 meters to 4 meters ≤ ±0.4 ℃
4m to 5m≤ ±0.5 ℃
32 ℃~42.5 ℃
206 X 150/320 X 240
Support
Support
Support
Support
---|---
General parameters
Protection class
Power supply
Operating temperature
Working humidity
Power consumption
Equipment size
Weight| IP42, Certain dustproof and waterproof function
DC12V (±10%)
-10 ℃~60 ℃
10%~90%
10W MAX
Length255mm X Width170mm X Height210mm
4.3KG
---|---
Setting
Click setting and enter the password to go to the menu, see below pictures with details(P1, P2)
Functions
Temperature calibration
Temperature calibration: It can adjust the temperature measurement if the
temperature measurement function is inaccurate.
Steps:
- Click Temperature calibration and enter the temperature calibration mode.
- Let a person who has normal body temperature standstill in front of the temperature measuring gun. (2-3 meters distance)
- The temperature calibration will be automatically completed after 30 seconds.
Temperature measurement calibration
When the temperature measurement is inaccurate, you can check whether the
temperature measurement point deviates or not.
Steps:
1. Click [Temperature measurement calibration] and enter the temperature
measurement calibration mode.
2. Check whether the frame is in the middle of the face on the thermal
imaging interface. If there is a deviation, you can adjust the position by
clicking the four arrows (up, left, and right)
3. After the adjustment is completed, click [Exit Calibration] or click 6
times in the middle of the thermal imaging interface to complete the
temperature measurement calibration and exit. The system will also
automatically save and exit the calibration mode after 3
minutes.
Parameter settings
The function can set high-temperature threshold, temperature compensation value, Relay on time, Record retention time days, IP address, Mask detection, Turn on voice broadcast, Language setting, System setting, volume setting, and USB flash disk upgrade.
- High-temperature threshold setting: Set temperature measurement threshold, voice alarm over temperature.
- Temperature compensation value: Manually set the test body temperature for calibration.
- Relay on time: The time interval between the opening and closing of the relay.
- Record retention time days: store test data (support 0-3000 days, fill in -1 for permanent storage).
- Mask detection: Turn on: When the person does not wear the mask, it will take a snapshot and save the data; If turned off the function it will not take a picture and save the data.
- Turn on voice broadcast: Turn on: Voice broadcast; Turn off: Silent.
- Language switch: Switch system language.
- System setting: Jump to the system settings interface.
- Volume setting: Adjust the volume.
- Server IP: The IP address of the server connects to the device. (Need to install ITM to the computer in advanced (installation manual for reference). Configure the server address to the device and the data can be transmitted to the system backstage( http://192.168.1.157:9100/ITM/api/dev/)).
**System setting![PerfectPrime AI200 Thermal Imaging Face Recognition System
- System setting](https://manuals.plus/wp-content/uploads/2022/05 /PerfectPrime-AI200-Thermal-Imaging-Face-Recognition-System-System-setting- 550x309.png)**
Report statistics
It can query, export, and clear inspection records.
A key to clear
Clear all inspection data.
Exit menu
Exit the temperature measurement system.
Device Interface Indication
Size Description
Interface Description
Power interface
In the rear tail of the device is the power input interface.
Details are as follows:
Signal Name | Signal Direction | Function Description |
---|---|---|
12V | Neizheng | 12VDC±10% DC input |
GND | External negative | Power ground |
The internal power input of the device has reverse polarity protection and surge protection.
Relay output
The alarm output is passive relay switch output, the contact voltage capacity is: 220V DC, 250V AC; the contact current capacity is 1 A; the power capacity is 30W.
Exit menu
The network interface marked in the device tail is the Ethernet interface of the face device, and the user can configure the parameters of the face device through the configuration tool.
USB interface
1 USB interface, can be used to connect the mouse and USB flash disk.
HDMI high-definition video interface
An external high-definition large display screen can display temperature measurement information in real-time.
CUSTOMER SERVICE INQUIRIES
Your emails are important to us so we strive to reply to all inquiries and
emails within 24 hours. In exceptional cases, we may require more time to
respond.
Thank you for your understanding.
For more information about our products and services, please send us an email:
cs@perfectprime.com
or B2B or project-based application, please send an email:
sales@perfectprime.com
FOR MORE INFORMATION ABOUT PERFECTPRIME PLEASE VISIT OUR ABOUT US PAGE AND
FEEL FREE TO BROWSE.
http://qr.w69b.com/g/r4oLxa2l2
Scan QR Code for the Youtube channel for video
manualhttp://qr.w69b.com/g/qRw248shO
Scan QR Code for the Product Manual page (Multi-Language available for certain
products)http://qr.w69b.com/g/mT0iM63Vm
Scan QR Code to register the product for a 1-year warranty
Retailer: HOME LIMITED
Email: cs@perfectprime.com
Address: G/F UNIT 3, 61 GLENTHORNE ROAD,
LONDON W6 0LJ UNITED KINGDOM
Telephone: +44 203 7695377
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>