PerfectPrime IR203 Thermal Camera for Apple iOS Devices Instruction Manual
- June 5, 2024
- PerfectPrime
Table of Contents
- Overview
- App Download
- Product Specifications
- Symbol Definition
- Getting Temperature of a Point
- Choose Color Palette
- Enable Filters for Better Picture Quality
- Contour Detection (Beta, Experimental)
- Menu Settings
- Recording Functions
- CUSTOMER SERVICE INQUIRIES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PerfectPrime IR203 Thermal Camera for Apple iOS Devices Instruction Manual
Overview
PerfectPrime provides you a way to sense the invisible, measure the
unfathomable, and analyze the improbable by providing thermal image and
temperature measurements in a new way. This Guide provides you all the
information you will need to operate the IR203.
The IR203 is powered by the host device, no charging or battery is needed
App Download
Scan the QR code below or enter the URL (https://apps.apple.com/tn/app/senxorproviewer/id1541291250) to download the “SenXorProViewer” application and install it (only supports iOS Phone system).
Product Specifications
General
| Resolution | 80 × 62 |
|---|---|
| FOV (angles in degrees) | 44.2° (H), 34.5° (V) |
| Maximum frame rate | 15 FPS |
| Max scene temperature range | -40°C to 1000°C |
| NETD | 150mK |
| Accuracy | up to +/-1°C |
Environmental
| Operating temperature | -20 – 85°C |
|---|---|
| Storage temperature | -40 – 85°C |
Interface
| Power Consumption | 300mW |
|---|---|
| iOS Dongle connector | Lightning |
| iOS Dongle size | 56mm x 28mm x 14mm |
Mechanical
iOS Dongle weight 9.3 g
Symbol Definition
You can download and install the Meridian SenXorProViewer App on Apple App Store. You need to install the App before you use the IR203.
-
Settings
-
Contour Detector Mean temperature
-
Contour Detector Selected contour
-
Color Palette temperature adjustments
-
Min/Max temperature And spread
-
Flip Image
-
Auto Range
(temperature) -
Start/Stop Capture
-
Image adjustments
-
FPS Up/Down Display
-
Selected point
(x,y) temperature -
Current color palette
-
Save Video Button
-
Connection Status
(red not connected Green connected)
Getting Temperature of a Point
The SenXorProViewer App allows the user to get the temperature of a particular
point by touching the location on the thermal picture. The crosshair on the
thermal picture indicates the selected X Y coordinates and the corresponding
temperature is shown on the screen
Choose Color Palette
The SenXorProViewer App allows the user to choose preset color palettes to map temperature values to different colors, include grayscale, colors and combinations.
16 preset color palettes are provided for image visualization, temperature
data is not affected. Tap the palette list, select one of the palettes on the
drop-down list and result will be applied to the new thermal image.
Enable Filters for Better Picture Quality
The SenXorProViewer App supports the following types of image filtering that serve to improve the intrinsic noise of the detector:
Temporal filters — these work in reducing the temporal Functuation of
individual detector pixels from one thermal frame to the next:
- Simple rolling average — accessed via the Averaging button, with recommended values of 2 or 4 (number of frames over which the averaging is performed.
- Predictive temporal filter – access via the Temporal Filter. The strength of which can be selected between low and high, depending on the dynamics of the scene. For static scenes, high strength is recommended, while for scenes with motion, low strength is recommended to avoid ghosting artefacts in the video.
Spatial filter – access via the AI Pre-trained Filter. This filter works by reducing the noise within an individualframe by considering the relation between the values of individual pixels within the frame. It is enabled by default and works best in conjunction with the temporal filters.
Contour Detection (Beta, Experimental)
The Contour Detection feature is for DEMO purpose only, not for medical advice or usage.
The SenXorProViewer App supports an indicative contour detection as an experimental feature. The function is based on the detection of the hottest region within the captured image– then display the mean of the hottest region.
The SenXorProViewer App shows the contour of the hottest spot that is automatically detected. Since the model involves some parameters, the user has control over them to fine tune the threshold and obtain a more stable readout.
The model is intended for distance between the camera and the subject in the
range of 0.7 to 2 m.
Menu Settings
The setting of Filters, Contour Detection, Temperature Unit and Emissivity and Language Selection can be found in the menu. Each setting is saved after change and will be kept even the SenXorProViewer App is restarted.
Emissivity is a property of the material of each individual object in the
field of view. It quantities the ability of an objects surface to emit long-
wave infrared radiation and strongly affects the temperature readout from the
IR203. By default, the emissivity is set to 0.95 which is a representative
value for many common objects with matt surface, as well as the human skin (in
the range of 0.95 – 0.97). Note that metals tend to have a dramatically lower
emissivity as low as 0.1, and it trongly depends on their surface processing.
The user can adjust the emissivity according to the exact object of
observation.
Recording Functions
Thermal video can be stored to the camera roll by pressing the save button on the video streaming screen.
To capture thermal photos, switch to photo mode and press the camera button.
The photos captured are stored in the camera roll.
Note: The SenXorProViewer App does not collect or save any thermal image
or video unless the user selects to save a picture or video to the device.
CUSTOMER SERVICE INQUIRIES
Your emails are important to us so we strive to reply all inquiries and emails
within 24 hours. In exceptional cases, we may require more time to
respond.
Thank you for your understanding.
For more information about our products and services, please send us an email:
cs@perfectprime.com
For B2B or project-based application, please send an email:
sales@perfectprime.com
FOR MORE INFORMATION ABOUT PERFECTPRIME PLEASE VISIT OUR ABOUT US PAGE AND FEEL FREE TO BROWSE.
Scan QR Code for the Youtube channel for video manual
Scan QR Code for the Product Manual page (Multi-Language available for certain
products)
Scan QR Code to register the product for 1 year warranty
Retailer Tyche Smart Limited
Emailcs@perfectprime.com
Address 2nd Floor, 107 Charterhouse Street,
EC1M 6HW, London,
England UNITED KINGDOM
Telephone +44 203 7695377
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>