BIKONIT Warthog MD 750 Electric Bike Owner’s Manual

Owner’s Manual
BIKONIT WARTHOG ELECTRIC BIKES

Introduction

Thank you for purchasing the Bikonit electric bike. We believe this technology, with the benefits of electric propulsion, provides you with the perfect vehicle to increase your mobility, extend your normal rides, and best of all, increase your fun!
Firstly, please take the time to read through and understand the instructions. We highly recommend you seek the assistance of your local bike shop with assembly. The Bikonit electric bikes are designed for all-terrain riding but also regular on-road riding. Please do obey all laws and regulations regarding Electric Assisted Bicycles and/or Motorized Vehicle regulations and their usage in your area. Bikonit recommends you wear a helmet during riding this electric bike.
This Owner’s Manual provides important information regarding the assembly, riding, and maintenance of this bike, please make sure to read it before you take the bike out for the first ride.
If you have questions after reading this manual, please go to Bikonit Help Center, contact us by email, and/or give us a call on the phone.
One more thing, please search “Bikonit Ebike Owners Group” on Facebook, where like-minded people connect, a forum focused on sharing your stories, ideas, experiences, technical questions, and more with the rest of the Bikonit community.
Bikonit, Inc.
Website: www.bikonit.com
Tel: +1 415-629-6623
Email: info@bikonit.com
Bike On It I To Anywhere!

Safety Warnings

You need to practice riding electric bikes, it can be dangerous to ride. The user or consumer assumes all risk of personal injuries, damage, or failure of the bicycle or system and all other losses or damages to themselves and others and to any property arising as a result of using the bicycle. There are risks related to the use of an electric bicycle that cannot be predicted or avoided, and which are the sole responsibility of the rider. As with all mechanical components, the bicycle is subjected to wear and high stresses. Different materials and components may react to wear or stress fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider. Any form of crack, scratches, or change of coloring in highly stressed areas indicates that the life of the component has been reached and should be replaced. For replacement parts, technical information, and warranty assistance, please contact service@bikonit.com.
PLEASE DO NOT DISASSEMBLE THE ELECTRONIC COMPONENTS IN ANY CASE!

General Warnings

IMPORTANT INFORMATION BEFORE YOUR FIRST RIDE

BATTERY
Fully charge the batteries before the first ride. Remove the battery before attempting to service, making adjustments, or performing any maintenance on this electric bike. Removing the battery will help ensure the motor is not started inadvertently while service or maintenance is being performed. Check Page 15 for battery removal instructions. The battery should be removed anytime the bike is stored or is left unattended to prevent unauthorized use or accidental engagement of the motor. Keep out of reach of children. Failure to remove the battery may result in serious injury or death.
Do not use a broken battery because its battery acid is highly corrosive and can cause serious burns if it comes in contact with your eyes or skin. Please turn to a doctor for medical assistance if this occurs.

You may charge your dual batteries at the same time or separately, make sure the battery (batteries) is (are) fully charged before your first ride. Watch out for the electric shock when attempting to plug the charger plug.

Brakes application
During your ride, the excess force on the front brake can cause you to lose balance and fall. This is an electric bike, it shares the same mechanical features as non-electric bikes. Bikonit recommends a mild start and also avoids harsh braking.
The Bikonit bike comes equipped with hydraulic disc brakes. These brakes are different from other general types of brakes associated with bikes. Disc brakes squeeze a hub-mounted disk between two pads. Stopping power on your bike can vary depending on adjustments and pad thickness and wear. Consult your local bike shop about brake options and adjustments according to your specific needs.
**Disc brakes come with sharp edges that may cause injury, make sure you or any other people take extra caution when touching it if they have to because of extremely hot after using, DO NOT touch it until it cooled down.**

More Brake Warnings
Disc brakes have varying amounts of braking power depending on adjustments and pad conditions. The excessive or sudden application of the front brake could pitch the rider over the handlebars which may result in serious injury or death.
Check the braking system, and make sure it functions properly before the first ride. Bikini has examined every single bike before packing, but the transportation could bring potential damage to the brakes, check it before each ride.

TRANSPORTATION OF BIKONIT ELECTRIC BIKES
– Always remove the battery (batteries) from the bike before transporting the bike – Never lay your bike on the chain side, use the kickstand or lay it to any strong vertical object that is enough to support the bike to stand.
INSPECTION BEFORE EACH RIDE
Before each ride, make sure you go through the checklist to ensure a safe ride. Never ride a bike with damages or defects, get it repaired, or turn to local bike shops for repair.

Tire inflation
Make sure to check tire pressures using a tire pressure gauge. The tires should be set between 7 psi and 15 psi.
Tires and Wheels

1. Spin each wheel and check that the tires are in good shape with no cuts or abrasions. If these are found, replace the tire immediately.
2. Inspect the rim for trueness by spinning it and watching for any side-to-side or up-and-down wobble. If any movement is noted do not ride this bike until the rim is repaired.

Handlebar stem and front-wheel
Make sure the front wheel and handlebar stem are aligned in the proper orientation of each other. Turn the handlebar from side to side with the front wheel locked between your knees to test the stem connection of the fork. If any movement is noted do not ride the bike until this is corrected. Inspect cable routing to be sure the handlebars can turn freely without binding or pinching the cables. Check to be sure that your handgrips on the handlebars are in good condition and the bars are not protruding through the grip.

Seat Position
The saddle should be adjusted for proper fit and is an important factor in riding safely. Place your pedals at the 6 o’clock and 12 o’clock positions. Your bottom leg should be very slightly bent when the ball of your foot is placed on the lower pedal. If it’s bent too much you need to raise the saddle. If you have to rock your hips to reach or can’t easily reach, you must lower the saddle. Ensure that the saddle is straight and level.

Seat and Seat Post
Check that the seat is securely mounted on the seat post by lifting and down on the seat. This should not tilt or move. Next, check the security of the seat post in the frame by attempting to rotate the seat. If the seat rotates, then the seat tube is not properly clamped into the frame.

Respect Local Regulations and Rules/Private Property
Remember each area in which you may ride your bike may have specific regulations. Always respect private property and never trespass. Respect the rights of others who may be sharing the trail with you; i.e.: hikers, cyclists, and equestrians. Stay on your designated trail and do not destroy vegetation and minimize your impact on the environment. If you are unsure of your local laws or regulations, please contact your local conversation officer before riding in designated wildlife areas.

An electric bike like any mechanical device is subject to fatigue, stress, and wear. Over time and due to use, the frame and its components can fail. The environment and type of riding the bike could reduce its useful lifespan. If proper care and maintenance are not performed your bike and or its components can fail to cause serious injury or death.

WARTHOG MD 1000

WARTHOG MD 750

WARTHOG HD 750

Unboxing and Assembling

Bikonit recommends that all the bikes be assembled, inspected, and adjusted by a professional bike mechanic or bike shop before riding. After receiving your Bikonit bikes, please subscribe to our YouTube TM Channel for unboxing and assembling videos.

1. You will need: a 6mm hex key Please remove the bike from the box carefully.
   a. Remove the front wheel, front fork, pedal, and charger from the box first.
   b. Take out all the parts of your bike from the box.

2. Remove all bubble wrap and other packaging materials and place them back in the box.

3. Attach the front wheel.
   a. Place the axle into the Barrel shaft of the dropouts on the front fork.
   b. Tighten the nut on the left and right sides. c. Tighten the silver 2 nuts (left and right) to fix the front wheel.

4. Installing the handlebar:
   a. Using a 6mm hex key, remove the 4 screws from the front of the stem and remove the bracket.
   b. Place the handlebar on the stem, then put the bracket and 4 screws back into place.

5. Attach the pedals
   a. The pedals are left and right-side specific. The end near the threads will have an L or R on them. indicating Left and Right.
   b. Put a small dab of grease on the threads of each pedal before inserting it into the crank.
   c. The right side is threaded normally, and the left is reverse threaded. This must be screwed in opposite to the right (to the left). The greased pedal should thread on smoothly. DO NOT CROSS-THREAD!

Ebike Using Guidance

1. How to Charge and Power On
Battery
a. The battery will be mostly charged when you receive it. It is better to use it first to drain it down and then charge it. This is also the case if you haven’t used the bike for a few months.
b. To charge the battery, remove the rubber plug from the side of the bike. Plug the charger into the power outlet and wait until the light on the charging unit is illuminated. Plug the other end of the cord into the bike. The light will change to green when it’s charged. (Two batteries, two charging ports).
c. There is a charging port that you can charge the battery one time.

d. The battery does not have to be installed in the bike to charge.
i. Remove the battery from the bike by inserting the key, turning it 90 degrees, and pulling firmly on the handle. ii: Press this button, it will show the capacity of the battery. iii. The charger will get hot, so make sure to keep it away from all flammable materials and surfaces.
iv. During normal use you can charge it after every ride regardless of battery level, there is no battery memory and therefore consistent charging won’t damage the battery.
v. The charging unit will automatically stop charging once the battery is full of safety.
vi. Always charge in dry, ventilated conditions away from sunlight, ideally 50-80 degrees Fahrenheit. vii. Only use the original charger, DO NOT use any aftermarket chargers or charging accessories.
e. For long-term battery storage, it is best to leave the battery at about 20% (1/4 lights). Always store the battery in a cool place (colder than 65F). For best results, do not store for longer than 4 months without cycling the battery, use it to de-charge, then re-charge to 20%.
f.There are two safety locks on the battery to better protect the battery
2- Powering Unit On
a. Make sure the battery is fully inserted and locked into the bike. b. Get on the bike, ready to ride. c. Turn on the switch of the display

General riding information
Once you have inspected your bike and all components are in proper working condition, you are ready to test ride your new bike. A few important general rules for riding include but are not limited to:

1. Strap on your helmet that meets safety testing requirements.
2. Have reflectors and lights installed on your bike?
3. Use proper hand signals.
4. Avoid loose clothing.
5. Ride on the correct side of the roadway with the flow of traffic.
6. Always wear a bright color and reflective clothing.
7. Ride single file if riding with others.
8. Obey all traffic laws and regulations and traffic signals.
9. Watch for parked car doors opening unexpectedly.
10. Watch for pedestrians stepping out, pets, and children playing near roadways.
11. Keep a safe stopping distance between you and other vehicles.
12. Never carry a passenger Never ride with earbuds or headphones.
13. Use caution when crossing railroad tracks and carefully cross at a 90 degrees angle.
14. Mount a horn or bell onto your bike to signal others of your approach.

Maintenance and Inspection

1. Before First Ride (After Initial Build and Inspection):
   a. Adjust the seat to a comfortable height.
   b. Adjust the saddle rails for comfort position.
   c. Adjust the handlebar, shifter, and brake lever position to your liking.
   d. Squeeze brake levers and test the braking power with the bike on a stand, or just walking alongside the bike. DO NOT attempt to ride the bike if the brakes are not adjusted properly.

2. Before Every Ride:
   a. Check tire pressure and tread wear. Check the sidewalls for damage.
   b. Check the brakes, and ensure brakes have adequate power and an appropriate amount of brake pad remaining.
   c. Check that wheels are straight and turning freely. Ensure spokes are consistently tight.
   d. Check the Chain tension and lube the chain to reduce friction and increase shifting precision.
   e. Check that the handlebars and stem are secure, and tighten all stem bolts.

3. After Every Ride:
   a. Wipe down the frame with soap and water. DO NOT use a power washer or high- pressure hose, this could damage the motor and electrical components.
   b. Mud and dirt can be washed away with a low-pressure hose, avoiding direct flow with the electrical components and motor assembly.

4. Monthly Maintenance:
   a. Check for loose spokes.
   i. Squeeze the spokes together to check the spoke tension. Spokes should flex slightly and return to their original position. Visit your local bike shop for wheel truing and spoke replacements if necessary. Tighten any loose spokes with a spoke wrench.
   b. Check forks for damage and air pressure (if applicable).
   i. The fork legs should move freely. Check the seals where the stanchions enter the lower legs of the forks. These seals can wear over time, and if not kept clean can damage the fork stanchions as well.
   c. Check cassette and chainring for wear/damage.
   i. Ensure the chain flows freely around the front chainring and each gear in the rear. Inspect the teeth in the front chainring as well as each cog in the rear. It is typical for grease and dirt to build up along the sides of the chainring, cassette cogs, and pully wheels on the rear derailleur.
   ii. Use a bicycle degreaser or chain cleaner and a brush to clean and degrease the chain and drivetrain components. Re-Lube with bicycle-specific chain lube, and wipe off excess.

5. General Safety Tips
   a. The user assumes the responsibility for the risk of injury or death as a result of riding or using products. It is the responsibility of the user to know and obey all local laws, rules, and regulations regarding the use of electrically assisted bicycles.
   b. Always wear an appropriate helmet when riding.
   c. Your bike is designed for use by persons 16 years of age and older. Always follow local laws and regulations regarding age restrictions and the use of electric bicycles.
   d. Riders must have the physical coordination, reaction time, and mental capacity to ride and manage traffic, road conditions, and sudden situations, as well as respect and obey the local laws governing bicycle and electric bicycle use.
   e. If you have an impairment or disability, consult your physician before riding any bicycle.
   f. Turn off the battery before performing any repairs or maintenance. Any turning of the cranks will cause the motor to engage, which could result in injury.

Troubleshooting

off engaged or faulty (3) Speed sensor adjusted too low (4) Blown fuse (5) Lose motor wire connector (6) Loose connectors (7) Broken Wire (8) Throttle disengaged or faulty| (1) Properly plug in the power cord to the battery (2) Disengage
brake cut-off or replace (3) Adjust speed sensor (4) Replace Fuse (5) Check motor wire connector (6) Check all connectors (7) Inspect all wires (8) Engage throttle or replace
b)| The bike operates but the battery gauge does not light up.| (1) Loose connectors (2) Damaged wires (3) Faulty battery gauge| (1) Check throttle connectors (2) Inspect all wires (3) Replace battery gauge
c)| The bike has been reduced! speed and/or range.| (1) Speed sensor is not adjusted (2) Low batteries (3) Faulty batteries (4) Low tire pressure (5) Brakes dragging against the rim| (1) Adjust speed sensor (2) Charge batteries for recommended Time (3) Replace batteries (4) Inflate tires to recommended Pressure (5) Adjust brakes and/or rim
d)| The bike has intermittent power.| (1) Loose connectors (2) Loose fuse (3) Damaged wires
all wires| (1) Check all connectors (2) Check fuse connector (3) Inspect
e)| The charger light does not operate.| (1) Power outlet faulty (2) Charger is not plugged to wall or battery properly (3) Charger light or charger is faulty| (1) Try another outlet (2) Check all plugs (3) Replace the charge
f)| The charger completes charging in an unusually short amount of time.| (1) Faulty charger (2) Faulty batteries| (1) Replace charger (2) Replace batteries
g)| Chain jumping off freewheel sprocket or chainring.| (1) Chainring out of true (2) Chainring loose (3) Chainring teeth bent or broken (4) Rear or front derailleur side-to-side travel out of adjustment| (1) Re-true if possible. or replace (2)Tighten mounting
bolts (3) Repair or replace chainring/set (4) Adjust derailleur
h)| Gear shifts not working properly.| (1) Derailleur cables sticking/stretched/damaged (2) Front or rear derailleur not adjusted properly (3) Indexed shifting not adjusted properly| (1) Lubricate/tighten/replace cables (2) Adjust derailleur (3) Adjust indexing

Return and Refund

Bikonit Ebikes Return Policy: All Bikonit all-terrain bikes can be returned and refunded within 15 days if you are not satisfied with the bike that you received. Bikonit will accept the return under the following conditions:

1. 5% processing fee will be charged if the order is canceled before shipping.

2. Bikonit Return and Refund Policy are only applicable when the merchandise was bought within 15 days of the purchasing date.

3. The customer is responsible for returning merchandise at his or her own expense. A 15% restocking fee and processing fee will be charged at the same time.

4. Merchandise is not eligible for a refund if it has been ridden, worn, used, abused, or damaged in any way. Merchandise must arrive complete (including warranty cards, manuals, accessories, promotional items, etc.) and in the original packaging.
   An RMA (Return Merchandise Authorization) request should be submitted to Bikonit by the customer. This can be done

5. by contacting Bikonit Customer Care via the support ticket service@bikonit.com.
   A customer should paste a sticker outside the box with the following information on BIKONIT RETURN MERCHANDISE

6. Customer name: Order number: Purchase Channel: All items should be returned to the following address or at discuss with Bikonit service care: 4422 E Airport Dr, Str A. Ontario, CA 917617. Defective or shipping damaged merchandise will be refunded 100%. Defective merchandise: The customer should send videos or photos of the defective item to the Bikonit service care center for confirmation; Shipping damaged item: A photo of the packaging material used inside a box (e.g. bubble wrap, Styrofoam peanuts, cardboard dividers, etc.) A close-up photo of the shipping label with the tracking number (please zoom in enough to read the tracking number which usually begins with 1Z)• Two photos displaying all 6 sides of the package (1 photo should display the top and 2 sides, the 2nd photo should display the bottom and the opposite sides).

Refund Policy: Once the return terms are confirmed by Bikonit and customers, a refund process will start at once. It will take 7 business days to process and send out a refund to customers. A confirmation will be sent to customers once a refund is on the way. Refund method at negotiating between Bikonit and the customer.

THANK YOU
FOR THE PURCHASE
Happy?
If you are satisfied then please share your experience with others. You can help us grow by sharing your happy experience.

Unhappy?
For any reason, if you are not satisfied with our product then please get in touch with our support team at service@bikonit.com

For warranty purposes, send us your order number, or authorized dealer bill info to info@bikonit.com.

WWW.BIKONIT.COM
TEL: +1 415-629-6623

References

• Bikonit Inc | Ultimate All-terrain Ebikes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>