Electrolux EKM3700 Kitchen Machine Instructions
- June 5, 2024
- Electrolux
Table of Contents
Electrolux EKM5570 Kitchen Machine
OVERVIEW
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So whenever you use it,
you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
- Get usage advice, brochures, troubleshooter, service information: www.electrolux.com
- Register your product for better service: www.electrolux.com/productregistration
- Buy accessories and consumables for your appliance: www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
When contacting Service, ensure that you have the following data available:
- Model Number
- PNC number
- Serial number
The information can be found on the rating plate.
Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.
COMPONENTS
- Motor head (tiltable)
- Speed selector
- Housing
- Tilt head locking button
- Front attachment hub
- Front attachment hub release button
- Rear attachment hub cover
- Attachment shaft
- Stainless steel bowl
- Bowl locking plate
- Non-slip feet
- Power cord
- Wire whip
- Coated dough hook
- Slicer/Shredder *
- Meat grinder *
- Blender*
- Blender lid with measuring cup *
- Transparent pouring shield
- Transparent chute
GETTING STARTED
- Unplug the appliance. The Wire whip, Meat grinder and Slicer/Shredder should only be washed by hand in warm soapy water. The bowl, Flat beater, Dough hook, SoftEdge-Beater™ and PerfectRiseLid™ are dishwasher-proof. Clean the motor unit with a damp cloth.
- Tilting the Motor head up: Move the Tilt head locking lever to “Unlocked” with one hand, tilt the Motor head up with the other hand. Once in up position it locks.
and hands away from areas with movable parts.
- Move Speed selector to “OFF”. Place the Stainless steel bowl on the bowl clamping plate. Move the bowl clock-wise to lock into position. Warning: Never operate appliance with the attachments wire whip, Flat beater, Dough hook or SoftEdgeBeater™* unless the bowl is in place, and the motor head is down.
- Place an attachment on the Attachment shaft: Align the slot at the top of the attachment with the pin on the Attachment shaft. Push the attachment up and turn it counterclockwise until the pin is locked into position. To
- Tilting the Motor head down: Move the Tilt head locking lever to “Unlocked” with one hand, tilt the Motor head down with the other hand. Insert the plug in the main socket.Move the Speed selector from “OFF” to desired speed (1-10). Once mixing is complete, turn the Speed selector to “OFF” and unplug the appliance.
- Work light and Power indicator light: If the appliance is plugged in and a speed is selected, a blue LED lights up around the Speed selector. A working light will also light up over the working area. If the Speed selector is
- Note: If the Speed selector is already turned on before the appliance is plugged in, both the blue Speed selector
OTHER FUNCTIONS
-
How to use the coated SoftEdgeBeater™ * tool: The SoftEdgeBeater™ is perfect for creamy mixtures and toppings.
The silicone edges of the beater, gently wipes the sides on the bowl helping to incorporate all the ingredients in the mixture and to ensure even consistency throughout the mixing process. -
Note: Do not use the coated SoftEdgeBeater™ * with heavy mixtures such as dough, use the dough hook tool
-
The PerfectRiseLid™ isolates and helps to build up the humid environment for the dough to rise in proper condition. Covering the bowl with the PerfectRiseLid™ keeps the dough from drying out, preventing the formation of a crust on the surface of the dough, which inhibits the proper rising of the dough which results in a poorer baking result.
-
If the machine is set to speed 1/P, you can temporarily stop the machine by pressing the “PULSE” button on the speed selector. Pressing it again will start the machine for 1,5 seconds. If you press continuously the machine will work as long as you keep the button pressed.
-
Attachment hub: The appliance comes with a built in multipurpose Attachment hub. Read and carefully follow
the instructions that comes with each attachment for correct and safe use. -
Adjusting the Attachment shaft: The appliance is adjusted at the factory so that the Flat Beater clears the bottom of the Bowl. If the Flat Beater hits the bottom of the Bowl or is too far away from the sides, you can adjust it correctly. See 14 for further instructions.
-
Turn the Speed selector to “OFF” and unplug the appliance. Tilt the Motor head back. Use a slotted point Head screwdriver to adjust the screw. Turn counter clockwise to raise the Attachment shaft, turn clockwise to lower it.
HOW TO USE THE MEAT GRINDER
-
Insert the grind screw (B) into the grinder housing (A). Place the knife (C) over the square shaft at the end of the grind screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the ring (E) by hand until the meat grinder is secured.
Note: Do not over tighten the ring. -
Open the Attachment hub Lid on the Stand mixer. Fit the Power shaft of the attachment in the Attachment hub socket on the Stand mixer. Rotate the attachment back and forth if necessary. Tighten the Attachment hub knob until the attachment is fully fastened.
-
Place the food tray over the grinder housing. Cut raw meat into small pieces and place it on the food tray. Plug in the appliance and turn the speed selector to desired speed (recommended speed: 6-8). Feed the meat into the feed chute by using the pusher.
CLEANING AND CARE
- Unplug the appliance. We recommend that the wire whip, meat grinder and slicer/shredder is washed by hand in warm soapy water.
- Do not use abrasive cleaners or scouring pads when cleaning the appliance.
SAFETY ADVICE
Read the following instruction carefully before using the appliance
- This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
- Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
- Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
- Children shall not play with the appliance.
- The appliance may only be connected to a power supply whose voltage and frequency
- Never use or pick up the appliance if
- the supply cord is damaged,
- the housing is damaged.
- If the appliance or the supply cord is damaged, it must be replaced
- Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
- Appliance is for indoor use only.
- Do not let cord hang over edge of table or counter, do not let cord contact hot surface, including the stove.
- Never use accessories or parts made by other manufactures not recommended or sold; may cause a risk of injury to persons.
- Make sure the motor has completely stopped before disassembling and cleaning.
- Avoid contact with moving parts. Contact could result in injury! Do not use other tools or utensils during the appliance usage.
- Do not leave this product out of your sight when it is running.
- Ensure all loose matters and your clothes/accessories are kept away while using this product.
- Never process boiling liquids (max 90°C).
- Do not use this appliance to stir paint. Danger, could result in an explosion!
- This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|---|---|
The motor slows down during operation. | Amount of dough may exceed maximum | |
capacity. | Remove half and process in two batches. | |
Dough may be too wet, it sticks onto the side of the bowl. | **** |
until the motor speeds up. Process until dough cleans the side of the bowl.
The motor does not work.| The appliance is not connected to the mains.| Make
sure to plug in the appliance before operation.
The appliance vibrates/ moves during operation.| The rubber feet are wet.|
Make sure the rubber feet at the bottom of the unit are clean and dry.
It is normal for heavy loads (e.g heavy dough, cheese).| Remove half and
process in two batches.
The attachment scrapes the Stainless steel bowl during operation.| The height
of the attachment shaft is incorrect.| Adjust the height of the attachment
shaft.
The Working light and Power indicator light| The Speed selector has been left
turned on.| Turn the Speed selector to “Arrest”.
DISPOSAL
This symbol on the product indicates that this product contains a battery
which shall not be disposed with normal household waste. This symbol on the
product or on its packaging indicates that the product may not be treated as
household that can remove and recycle the battery and electric parts in a safe
and professional way. Follow your country’s rules for the separate collection
of electrical products and rechargeable batteries.
RECIPES
WHISKING FUNCTION QUANITITIES AND PROCESSING TIMES
Ingredients| Quantity| Unit| Time| Speed|
Cream| 2.1~6.1| dL| 60~80s| 8~10|
Egg-white| 1.2~2.4| dL| At least 100s| 8~10|
Method
Use the wire whip tool.
Recipe| Ingredients| Quantity| Unit| Time| Speed
Cake sponge
| Flour| 6,0| dL| ****
200~230s
| ****
Medium setting (5~6setting)
Margarine| 1,5| dL
Sugar| 1,7| dL
Baking powder| 1,0| tsp
Chocolate cake
| Flour| 8,0| dL| ****
300~360s
| ****
Medium setting (4~6setting)
Egg| 4,0| pcs
Butter| 2,0| dL
Sugar| 1,7| dL
Vanilla Sugar| 2,0| tsp
Sour cream| 1,0| dL
Nougat raw mixture| 100| g
Baking soda| 3,0| tsp
Method
The butter should be soft not hard. Stir the soft butter with sugar until
creamy. Add the eggs one after another. While stirring, add the
Note: Use the SoftEdge Beater™* tool for creamier results.
Butter Cake
| Flour| 3,0| dL| ****
200~230s
| ****
Medium setting (4~6setting)
Margarine| 1,5| dL
Sugar| 1,7| dL
Fresh egg| 3| pcs
Baking powder| 1,0| tsp
Method
Place all ingredients in the bowl, and mix them, till it is ready.
Note: Use the SoftEdge Beater™* tool for creamier results.
Chocolate butter cream frosting
| Semi-sweet chocolate chips| 2,3| dL| ****
200~230s
| ****
Medium setting (4~6setting)
Butter, softened| 1,15| dL
Sifted confectioners’ sugar| 4,6| dL
Milk| 5| tsp
Vanilla extract| 0,5| tsp
Method
Melt chocolate chips over hot water; stir until smooth. Set aside; cool 15
minutes. We recommend to use the SoftEdge Beater™*
In large bowl, beat butter until creamy. Gradually add confectioners’ sugar, alternately with milk. Add melted chocolate and vanilla; beat until smooth.
HOOKS FUNCTION QUANTITIES AND PROCESSING TIMES
Recipe| Ingredients| Quantity| Unit| Time| Speed
Yeast dough* (bread) min. Quantities
| Flour| 6,0| dL| ****
350~380s
| ****
Low setting (max. 2 setting)
Water| 2,0| dL
Sugar| 2,4| dL
Margarline| 1,0| tbs
Salt| 1,0| tsp
Dry Yeast| 2,0| tsp
Method
.
Assemble the coated dough hook to mix the ingredients
Place all the ingredients into the bowl and knead until satisfactory. Cover the bowl with the PerfectRise Lid™* and let it rise.
Yeast dough* (Pizza dough) max quantities
| | 16,0| dL|
At least 480s
| ****
Low setting (max. 2 setting)
Water| 4,0| dL
Oil| 1,0| dL
Fresh egg| 2,0| pcs
Salt| 3,0| tsp
Sugar| 2,0| tsp
Dry Yeast| 1,0| tbs
Method
1. In a container mix half of the yeast with the salt and
the sugar and set aside;
2. In the bowl add the remaining yeast with the water and the oil;
3. This dough should be mixed with a whire whip tool, at minimum speed until a smooth mixture is obtained;
4. Add into the bowl the fresh eggs and the preparation set aside in point 1 (the yeast mixed with salt and sugar). The speed should be increased to medium.
dough hook tool.
doesn’t exceed setting 2.The dough should be mixed until it releases completely from the interior surface of the bowl.
7. Cover the bowl with the PerfectRise Lid™* and let it rise.
Do not exceed Speed 2 when preparing yeast dough. This may damage the machine.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>