VONYX STM2290 8-Channel Mixer Sound Effects Instruction Manual

VONYX STM2290 8-Channel Mixer Sound Effects

INSTRUCTIONS

• Prior to using the product, please ask for advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
• The product contains voltage-carrying parts. Therefore do NOT open the housing.
• Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
• Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
• The product is not suitable for continuous use.
• Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
• When unplugging the product from a mains outlet, always pull the plug, never the lead.
• Do not plug or unplug the product with wet hands.
• If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
• If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on.
• Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
• To avoid fire and shock hazard, do not expose the product to rain and moisture.
• All repairs should be carried out by a qualified technician only.
• Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
• If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
• Never use the product in humid rooms or outdoors.
• To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
• Do not repeatedly switch the product on and off. This shortens the life time.
• Keep the product out of the reach of children. Do not leave the product unattended.
• Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
• Do not force the controls.
• If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
• If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time.
• Otherwise the battery may be permanently damaged.
• If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
• If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
• Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
• Keep away from electronic equipment that may cause interference.
• Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
• Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
• Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
• The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
• Keep the original packing material so that you can transport the product in safe conditions.

ATTENTION

• This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
• This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
• The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee.

NOTE

• To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
• Electric products must not be put into household waste. Please bring them to a recycling centre.
• Ask your local authorities or your dealer about the way to proceed. The specifications are typical.
• The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
• Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product.
• This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual.
• Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

CONTROL PANEL

1. MIC VOLUME Volume control of the microphone
2. OUTPUT METER VU-meter with LED as indicators for the strength of the output signal
3. EQUALIZER 5-band EQ
4. POWER: On/Off
5. CUE VOLUME The CUE VOLUME ROTARY KNOB adjusts your headphone monitor output volume
6. SWITCH STEREO / MONO
7. MASTER VOLUME FADER
8. This fader will allow you to adjust the master volume of the unit

SOUND EFFECTS SECTION

1. Eight different sound effects may be added to your mixer by pressing the SOUND EFFECTS CONTROL BUTTONS. The volume of the effects can be adjusted using the rotary VOLUME knob
2. SPEED Sound effect speed adjustment
3. VOLUME Sound effect volume adjustment
4. CROSSFADER SELECTION Crossfader selection for Channel 3 or Channel 4
5. CROSS-FADER:Slide for step-less cross-fading from one to another assigned channel
6. CROSSFADER SELECTION Crossfader selection Channel 1 or Channel 2

BACK PANEL

1. DC12V: Connector for a power supply
2. HEADPHONE Use the headphone for pre-listening the output signal (6.35mm)
3. MASTER OUTPUT The MASTER output jacks connect the mixer to your main amplifier using standard audio cables with an RCA-type connector
4. LINE 6: Signal input
5. LINE 5: Signal input
6. LINE 4: Signal input
7. LINE 3: Signal input
8. PHONO/LINE 2: Signal input
9. LINE 1: Signal input
10. MICROPHONE: Microphone connector

DISPLAY

1. USB INPUT: Insert your USB flash drive into this slot. The unit will only read .mp3 file formats from the USB flash drive
2. MP3 PLAYER: Selects the previous track (short press) or volume decreasing (long press)
3. MP3 PLAYER: Starts the playback and pause function
4. MP3 PLAYER: Selects the next track (short press) or volume increasing (long press)
5. MODE SELECTOR: Select the input source

CONNECTING WITH BT

1. Activate the BT function on your device (Mobile phone, tablet etc.) from which you want to play the music. See the operating instructions for that device.
2. Press the “MODE” button and activate BT function.
3. Select “VONYX” on your BT device and make the BT connection.
4. If a password is required, you can enter “0000”.

Attention: The BT distance is approx. 10 meter without any barrier.

References

• Samen zijn we open. Samen staan we sterk. - Stichting Open
• Samen zijn we open. Samen staan we sterk. - Stichting Open
• Sound & Light distributor - Tronios.com
• Homepage - Wecycle
• Homepage - Wecycle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>