Electrolux Renew 800 Steam Station Instruction Manual

: June 5, 2024
: Electrolux

Table of Contents

CUSTOMER CARE AND SERVICE
COMPONENTS
GETTING STARTED
SAFETY ADVICE
TROUBLESHOOTING
Documents / Resources

Instruction Book
RENEW 800
STEAM STATION
CENTRALE VAPEUR

E8ST1-XXXX
electrolux.com

WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.
Visit our website to:

| Get usage advice, brochures, troubleshooter, service information: www.electrolux.com
---|---
| Register your product for better service: www.electrolux.com/productregistration
| Buy accessories and consumables for your appliance: www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available:

Model Number
PNC number
Serial number

The information can be found on the rating plate.

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.

It may be possible that your steam station does not produce steam immediately after filling it with water. The reason for this is that air trapped in the inner system can delay this function for a few seconds. Please be patient and try it again by pressing the steam button. For your convenience, the steam will be produced after you release the steam button for a few seconds and it is not necessary to press the button all the time. Find out your rhythm for the best streaming result.

COMPONENTS

A. Light indicator for heat-up/ cool-down
B. Headlight illuminating ironing area
c. Touch screen for temperature-steam program selection
D. Steam boost button
E. Steam hose
F. Removable water tank with integrated anti-calc cartridge
G. Maximum water level indicator
H. Boiler unit i. Iron rest area
I. RESILIUM” anodized soleplate| K. Power cord
L Steam hose storage
M. ON/OFF button
N. ECO (ON/OFF) button
O. Tank empty indicator light
P. Carry lock front part
Q. Locking mechanism
R. Hot soleplate indicator
S. Power cord storage
T. Boiler cap
U. Anti-calc cartridge in water tank
V. Cleaning brush
---|---

GETTING STARTED

Before first use. Remove all adhesive remains and gently rub with a dampened cloth. Position the steam station iron horizontally on the ironing board or on a heat-resistant, secure surface at the same height as an ironing board. Unwind and straighten the power cord and the steam hose.
Remove the water tank (F) by gripping the slot on the underside and pulling it gently away from the boiler unit. Detach the anti-calc cartridge (U) and then immerse it in water for more than 60 sec. Insert the anti-calc cartridge back. Fill the water tank using cold water. It is recommended to use distilled water or a mix of 50% distilled, 50%
tap water. Empty the water tank to rinse out any foreign particles which may have remained from the manufac Turing process. We recommend replacing the anti-calc cartridge after 3 months.
Always refill the water tank to MAX level using cold water (F). Caution! Never operate the appliance without any water in the tank.
Connect the steam station to the main supply. Press the ON/OFF button. Select the ironing programme from the touch screen on the iron. The light indicator on the iron will pulsate when the steam station is preheating. When turned on for the first time, temporary vapours/odours may occur.
As soon as the selected temperature has been reached, the light indicator is on permanently and the headlight turns on. Now the appliance is ready to be used.
The steam station is equipped with an ECO setting. Ironing on ECO setting in each programme selected saves up to 20% energy consumption. ECO setting is using lower pressure, producing a lower steam rate but delivering faster heat-up time. OPERATING INSTRUCTIONS
Unlock the iron by switching the locking mechanism to lift it from the iron rest area. Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.
To activate the steam function, press and hold the steam boost button for 3-5 seconds. Hold the steam boost button to eject a concentrated jet of steam. When releasing the button, use up the steam before putting it back on the iron rest of the steam station. It is recommended that the steam button is used for short periods. Caution! Never release steam while the iron is standing on its rest.
Turn off the appliance by pressing the ON/OFF button (lighting will go off ).
Always cool the iron fully on the iron rest before storing away. Once the iron is cool, empty the water tank. Store the steam station iron on the iron rest.
When finished using the appliance, switch it off by pressing the ON/OFF button. Put the iron on the iron rest area and switch the locking mechanism in order to secure the iron.
Always store the power cord in the power cord storage (S) and the steam hose in the steam hose storage (L) on the steam station base.
Warning! NEVER wind the power cord around the iron.
CLEANING
Turn the station base to the side so that the boiler cap is uppermost. Unscrew the boiler cap. Turn the appliance side over a sink and completely empty the boiler.
Mix a descaler agent and water at the specified ratio, and prepare at least 300ml descaler mixture. (Use the recommended
ratio for the mixture. If there is much scaling, properly increase the proportion of descaler.)
Note: We recommend using the descaler EUD5 from Electrolux. Please follow the water/ descaler liquid ratio instructions on the bottle. We recommend cleaning the product every 2 months.
Pour out the mixture. Fill the boiler with clean water, then pour it out. Repeat this step several times until the scale is removed and there is no longer a descaler smell. Place back one measuring cup of clean water in the boiler before reassembling.
THE WARRANTY DOES NOT COVER DAMAGE CAUSED BY CLOGGING DUE TO LIME. Once cleaning is done, do not keep the boiler completely empty but leave some water still there (before closing it again).
Insert the cleaning brush into the boiler opening and clean-out water remnants and lime residues while holding the appliance over a sink.
Clean the appliance with a slightly damp cloth. To remove stubborn stains, you may apply a small amount of non-abra- sive cleaner.
Enjoy your new Electrolux product!

SAFETY ADVICE

Read the following instruction carefully before using the machine for the first time.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
The surfaces are liable to get hot during use.
This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense filtered water, taking out impurities like limescale. Otherwise, use distilled water. If the tap water is particularly hard, use a mix of 50% distilled water and 50% tap water.
The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!
The iron is not to be used if it has been dropped, if there are visible signs of damage on the iron or its cord or if it is leaking.
The appliance must only be connected to an earthed socket. If necessary an extension cable suitable for 10 A can be used.
If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person, in order to avoid hazards.
The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
Never leave the appliance unattended while connected to the supply mains.
The appliance must be switched off and the mains plug withdrawn each time after use, before cleaning and maintenance.
The plug must be removed from the socket outlet before the water reservoir is filled with water.
The main cable must not come into contact with any hot parts of the appliance.
Do not immerse the appliance in water or any other liquid.
Do not exceed the maximum filling volume as indicated on the appliances.
The filling aperture must not be opened during use.
Before refilling the water reservoir, please remove the plug from the socket.
Do not pour vinegar, descalers or other scented substances into the tank. Otherwise the warranty may be revoked.
This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.

IRONING CHART

FABRIC	TEMPERATURE SETTING	IRONING RECOMMENDATION
Acrylic	Outdoor	Dry iron inside out.
Acetate	Outdoor	Dry iron inside out while still damp or use a spray to

dampen.
Nylon & Polyester| Outdoor| Iron inside out while still damp or use spray to dampen.
Rayon| Outdoor| Iron inside out.
Viscose| Outdoor| Iron inside out.
Silk| Outdoor| Iron inside out. Use an ironing cloth to prevent shiny iron marks.
FABRIC| TEMPERATURE SETTING| IRONING RECOMMENDATION
---|---|---
Cotton blends| Outdoor| Check the label and follow the manufacturer’s instructions. An outdoor setting is recommended for this kind of fiber.
Water-repellent breathable fabrics (excluding PVC coatings)| Outdoor| Gently wash and air dry your outdoor garments according to their care label instructions. Carefully and slowly dry iron the outside to reach all parts of your garment in order to reactivate the DWR (Durable Water Repellency) treatment and restore the water repellency of your outdoor garments, which is better than air-drying only.
Wool & Wool blends| ●Wool| Steam iron inside out or use an ironing cloth.
Cotton| ●●Cotton| Dry iron while still damp or use a spray to dampen. Use maximum steam.
Corduroy| ●●Cotton| Steam iron inside out or use an ironing cloth.
Linen| ●●Cotton or●●●Linen| Iron inside out or use an ironing cloth to prevent shiny iron marks, especially with dark-colored fabrics. Dry iron while still damp or use a spray to dampen. Use maximum

steam.

Denim| ●●Cotton or●●●Linen| Use maximum steam. Apply maximum steam by pressing and holding the steam boost button.
Please follow the instructions of your garment care label.
Varied ironing speed and fabric dampness might cause the optimal settings to differ from the recommendations in the table!

TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	SOLUTION
Soleplate is not heating even though the iron is turned on.	Connection
problem	Check main power supply cable, plug, and outlet.
Temperature control is in the “Outdoor” position.	Select a higher program

like “ ●●Cotton”.
Iron does not produce steam.| Not enough water in the tank.| Fill the water tank (see “Getting started”, no 2).
Selected temperature is lower than that speciﬁed to use with steam.| Increase temperature to at least “●●Cotton”.
Steam boost and vertical steam boost function do not work.| Steam boost function was used very frequently within a short period.| Put iron in a horizontal position and wait before using the steam boost function.
Iron is not hot enough.| Adjust the proper temperature to steam ironing (up to “ ●● Cotton”). Put iron in a vertical position and wait until the temperature indicator light turns off.
Water leaks from the soleplate during ironing.| The iron is not hot enough.| Set the temperature dial to a temperature (“ Cotton” to maximum) suitable for steam ironing. Put the iron on its heel and wait until the headlight is on before you

start ironing.

Flakes and impurities come out of the soleplate during ironing.| You have used hard water, which has caused scale flakes to develop in the water tank. Clean the station with descaler (see “Cleaning“, no 14).| Press and hold the steam button for about one minute to get steam. Then hold one more minute in order to clean the steam-generating system. Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are transferred to your garments.
Water leaks from the soleplate while the iron is cooling down or after it has been stored.| The iron has been put in horizontal position while there is still water in the water tank.| Empty the water tank and switch off the steam station by pressing ON/OFF button (M) on the boiler unit before storing the iron.
PROBLEM| POSSIBLE CAUSE| SOLUTION
---|---|---
Brown streaks come out of the soleplate while ironing and stain the linen.| You may have used chemical descaling agents different from the recommendation.| Use the descaling agent from the recommendation (see “Cleaning”, no 14).
Fabric fibers have accumulated in the holes of the soleplate and are burning.| Clean the soleplate with a damp soft cloth.
Fabrics might not be properly rinsed or the garments are new and have not been washed before ironing.| Please rinse the fabrics properly before ironing.

DISPOSAL

This symbol on the product indicates that this product contains a battery which shall not be disposed with normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To recycle your product, please take it to an official collection point or to an Electrolux service center that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products and rechargeable batteries.

Electrolux reserves the right to change products, information, and specifications without notice.

Lavignia_Renew_800_SteamStation_Elux_180918.indd

www.electrolux.com
2018-09-18 13:08:32
3485 E 02 01 0918