OSI Go Direct OSI-CAM-DB01 1080P Outdoor Wi-Fi Security Doorbell Camera User Guide

June 5, 2024
OSI go Direct

OSI Go Direct OSI-CAM-DB01 1080P Outdoor Wi-Fi Security Doorbell Camera

What’s in the box

OSI-Go-Direct-OSI-CAM-DB01-1080P-Outdoor-Wi-Fi-
Security-Doorbell-FIG-1

Consult the checklist below for all components.

Description

OSI-Go-Direct-OSI-CAM-DB01-1080P-Outdoor-Wi-Fi-Security-
Doorbell-FIG-2

  • Power DC 5V/1A (Battery); AC 12~24V (AC supply) Doorbell button Press the button to activate the doorbell Status light
  •  Solid red light on: network is malfunctional
  •  Blinking red light: wait for network connection (slowly) Connecting the network (fast)
  •  Solid blue light on: camera is working correctly Microphone Capture sound for your video SD card slot Support local SD Card storage (Max.128G) Reset Press and hold on for 5 seconds with pin to reset the doorbell (unable to unbind the bell from account) Charging indicator
  •  Red indicator solids on: battery is charging
  •  Blue indicator solids on: Fully charged

Installation

Battery InstallationOSI-Go-Direct-OSI-CAM-DB01-1080P-Outdoor-Wi-Fi-
Security-Doorbell-FIG-2
AC InstallationOSI-Go-Direct-OSI-CAM-DB01-1080P-Outdoor-Wi-Fi-Security-
Doorbell-FIG-4

Connection

Download
Smartlife or Tuya Smart is available for both iOS and Android OS. Search the name ‘Smartlife’,’Tuya Smart’ in App Store or Google Play, or scan the QR­Code to download the App. You can select the App according to needs.OSI-Go-
Direct-OSI-CAM-DB01-1080P-Outdoor-Wi-Fi-Security-Doorbell-
FIG-4

Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi .OSI-Go-Direct-OSI-CAM-DB01-1080P-Outdoor-Wi-Fi-Security-Doorbell-
FIG-4

Registration process

  • Step 1 Open the Smart Life App, click •sign up·, read the “User Agreement Privacy Policy” and click • Agree·
  • Step 2 Input a legal and valid Mobile number or Email address and click “Get Verification Code”. Input the verification code to log in.

QR Code Configuration

  1. Open the Smart Life App, click “My” > > “Home Management” >> “Create a home”, and you can customize the home name and related settings.
  2. Click “Add Device” or “+”, and then select “Security & Sensor” > > “Smart Camera” to add camera.
  3. Power on and reset camera until the status indicator is flashing quickly or a prompt tone is heard, and then click ·Nexr. Then input your WiFi’s passwords and click ·Next”.  Click •.:;, • to change network.
  4. In this interface, you should scan the QR code in your phone with the camera.when the camera comes out “dong dong dong·. And you can complete the configuration about 30s.
  5. When connecting, you should make sure your router,mobile,and camera are as close as possible.When camera added successffully,click “[2:” you could also DIV the camera’s name.

Note:

  1. Camera only supports 2.4GHz WiFi network.
  2.  The number of bits in the ssid and passwords of the router should not exceed 24 digits.
  3. In this interface, you should scan the QR code in your phone with the camera.when the camera comes out “dong dong dong·. And you can complete the configuration about 30s.
  4. When connecting, you should make sure your router,mobile,and camera are as close as possible.
  5. When camera added successffully,click “[2:” you could also DIV the camera’s name.

Settings

In ·smart Camera” intetface,click ·rz::·,you can set the camera common functions.

Function

Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in App.
Full-duplex audio
You can see and hear the vistor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your cell phone.
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The threshold is set to a minimum of 10% and a maximum of 50%. When the battery power of the camera is lower than the set threshold, the App will have a reminder.
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.

FAQ

Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.

Thank you for your purchase
We’re happy you chose our OSI Smart DIV product and appreciate your business. We’re constantly striving to provide the best experience for our customers. If you have quesitons or need help with your product please email us at sales@osigodirect.com (allow up to 1 business day for reply), or call us Monday – Friday: 9:00am – 5:00 (CT) at 204.488 . .2274, and let us do our best to help you! -OSI Go Direct Team

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals