CuberPower MP1028WWR1 4-Pack: 8-Outlet Surge Protector (6 AC & 2 USB Ports) User Manual

CuberPower MP1028WWR1 4-Pack: 8-Outlet Surge Protector

FEATURES

1.  Surge Protected Indicator Illuminated when the surge protection feature is working properly.
2. Ground Indicator LED Illuminated when the Ground protection feature is working properly.
3.  Pivoting Grounded Outlets (6) Pivoting outletsfor ease of useand convenience, fits standard-sized plugs.
4.  USB Charging Ports Connect and charge up to two (2) USB devices using the surge-protected USB charging ports. USB outlets cannot be used as a USB hub. This device does not transfer data.

SPECIFICATIONS

•  Model Number: MP1028WWR1
•  Outlets: 6 Standard Outlets, 2 USB Charging Ports
•  Surge Protection: 1,200 Joules
•  Electrical Rating: 125 V/15 A/1875 W
•  USB Charging Rating: 5 V/2.4 A total
•  UL Clamping Voltage: UL 1449 3 rd/400 V (H-N, N-G), 500 V (H-G)
•  Maximum Peak Current: 60,000 A
•  3 AC Lines Protected: H-N: 30,000 A, H-G: 15,000 A, N-G: 15,000 A;(The maximum surgepossible on household Wiring is 6,000 volts)
•  Response Time: Less than 1 nanosecond
•  Attenuation: Up to 32 dB
•  EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT “daisy chain” surge protectors. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is less than 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel. DO NOT use for medical or life support equipment. This device features internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.

TROUBLESHOOTING

•  If the grounded indicator does not light when you plug in the surge protector, move the surge protector to a different grounded three-prong AC outlet. If it still does not light, return the product to the retailer for assistance. If the surge protector appears to be working properly, your outlets may not be properlygroundedandneedtoberepaired by a professional electrician. If the grounded indicator turns off after a period of use, the surge protection has been depleted. Replace your surge protector.

•  If the protected indicator does not light, the surge protector’s AC lines are no longer protected from surge. The surge protector may have received a power surge or spike beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The surge protector has protected your connected equipment as designed, but it will not protect against future surges, and spikes. It should be replaced.
  TECHNICAL SUPPORT
  Please contact our Tech Support Department with installation, troubleshooting, or general product questions.

•  Phone: 1-877-297-6937

•  Visit: CyberPowerSystems.com/support

•  Hours of Operation: Monday – Friday 7:00am – 6:00pm CST

LIMITED LIFETIME WARRANTY

Read the following terms and conditions carefully before using the CyberPower CSP600WSURC2 (the “product”). By using the product, you consent to be bound by the terms and conditions of this limited life time warranty and connected equipment guarantee (together referred to as this “warranty”). IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT. Who is providing this warranty, and what does it cover? Cyber Power Systems (USA), Inc. (“CyberPower”) provides this limited lifetime warranty. It only covers the original purchaser and ends if you no longer own the product. This warranty covers defects in materials and workmanship in the product under normal use and conditions. It also covers equipment connected to the product and damaged because of the failure of the product. This warranty covers the product and connectedequipmentforaslongasyouowntheproduct.

• How do you open a connected equipment claim?

  • 1. Call us at 877-297-6937, or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379, orsendusan email at claims@cpsww.com within 10 days of the occurrence for instructions.
  • 2. When you contact CyberPower, identify the product,the purchase date, and the item(s) of connected equipment. Have information on all applicable insurance or other resources of recovery/paymentthatareavailabletothe initial customer and request a claim number.
  • 3. You must provide a dated purchase receipt (or other proof of the original purchase) for the CyberPower unit and connected equipment. You also need to provide a description of the damage to your connected equipment.
  • 4. Packandshipthe product to CyberPower andthe item(s) of connected equipment, a repair cost estimate for the damagetotheconnectedequipment,andallclaimforms that CyberPower providesto you. Show the claim number on the shipping label, or include it with the product. You must prepay all shipping costs. You are responsible forpackagingandshipment,andyoumustpay thecostofthe repair estimate.

• Who pays for shipping?
  We pay shipping when we send items to you; you pay when you send items to us.

• What are some things this Warranty does not cover?
  THISWARRANTYDOES NOT COVER: ANY ANYSOFTWARE THATWAS DAMAGED, SOFTWARE THATNEEDS TOBE REPLACEDDUE TOTHE FAILUREOF THE PRODUCT,OR ANY DATA THAT IS LOST AS A RESULT OF THE FAILURE. THISWARRANTYDOESNOTCOVERTHERESTORATION OF DATA OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.  This warranty does not cover: misuse, modification, operation or storage outside of the environmental limits of the product or the equipment connected to it. It does not cover damage while in transit or in storage; if there has been improper operation or maintenance, or use with items not designed or intended for use with the product, such as laser printers, appliances, aquariums, medical, or life support devices, etc.

• What are the other limitations?
  The sole and exclusive remedies of the initial customer are those provided by this warranty.

  1.  This warranty does not apply unless the product and the connected equipment were connected to properly wired and grounded outlets (including compliance withelectrical and safety codes of the most current electrical code), without the use of any adapters or other connectors.
  2.  The product must have been plugged directly into the power source. The equipment connected to the product must be directly connected in the product, not “daisy chained” together in serial fashion with any extension cords, another product, or device similar to the product, surge suppressor, or power tap. Any such installation voids the warranty.
  3.  The product and connected equipment must have been used properly in a suitable environment, in conformance withanyapplicablelicense, instruction manual,or warnings.
  4.  The product must have been used at all times within the limitations on the product’s maximum rated wattage.

CONTACT INFORMATION
Cyber Power Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Toll-free: 1-877-297-6937 | CyberPowerSystems.com

References

• CyberPower UPS Systems, Battery Backup, PDUs, USB Surge Protectors
• Registration | CyberPower
• Support | CyberPower
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>