LG SN6Y Wireless Soundbar User Guide
- June 5, 2024
- LG
Table of Contents
SIMPLE MANUAL
Wireless Sound Bar
Please read this manual carefully before operating your set and retain it for
future reference.
To view the instructions for advanced features, visit http://www.lg.com and
then download Owner’s Manual. Some of the content in this manual may differ
from your unit.
MODEL…………….
SN6Y……………..
Front Panel
(Standby) · · · · · · · · · · · ·Switches the unit ON or OFF.
F (Function) · · · · · · · · · · · · · · · · · · · · · · · · · ·Selects
function.
-/+ (Volume) · · · · · · · · · · · · · · · · · · · · · · Adjusts the
volume.
Rear Panel
DC IN · · · · · · · · · · · · · · · · · · · · · Connect to the AC
adapter.
USB Port · · · · · · · · · · · · · · · · · · · ·Connect to a USB device.
OPTICAL IN · · · · · · · · · · · ·Connect to an optical device.
HDMI IN · · · · · · · · · ·Connect to device with HDMI OUT.
(TV ARC) HDMI OUT · · · · · · · · · · · · · · · Connect to a TV.
- It is recommended that you purchase a USB gender separately for the convenience of USB insertion and extraction. (Recommended USB gender type : USB 2.0 extension cable)
- Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.
Subwoofer Connection
Place the wireless subwoofer near the soundbar and follow the steps below.
- Connect the power cord of the soundbar and the wireless subwoofer to the outlet.
- Turn on the soundbar.
• The soundbar and wireless subwoofer will be automatically connected. The subwoofer’s green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make a sound, try to connect manually.
-
Press PAIRING on the rear of the wireless subwoofer.
• The green LED on the rear of the wireless subwoofer blinks quickly.
(If the green LED does not blink, press and hold the PAIRING.) -
Turn on the soundbar.
• Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
Keep the soundbar and the subwoofer away from the device (ex. wireless router,
microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference.
TV Connection
Connect the soundbar and TV using Optical (a ) or HDMI ARC (b ).
A. Optical Connection
- Connect the soundbar to the TV using an Optical cable.
- Set up [External Speaker (Optical)] on your TV setting menu.
B. HDMI (ARC) Connection
- Connect the soundbar to the TV using an HDMI cable.
- Set up [External Speaker (HDMI ARC)] on yo urTV setting menu.
- The HDMI connection is unavailable if your TV does not support HDMI ARC.
- If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority.
Additional Device Connection
-
Connect to the external device as follow.
-
Set the input source by pressing F repeatedly.
Remote control
: Skip/Search
** : Play/Pause
– Bluetooth connection lock (BT LOCK): Select the Bluetooth function by
pressing F repeatedly. Long press **and press it again to limit
Bluetooth connection to only BT and LG TV.
SOUND EFFECT: Selects a sound effect mode.
– TV remote: Long press SOUND EFFECT and press it again to use the TV
remote control.
FOLDER : Searches a folder.
J: Displays the information of a file, an input source, or a connected
Bluetooth device name.
– Auto Power ON/OFF: Long press and press it again.
: Adjusts the sound level of each speaker.
– Surround sound: Long press and press it again.
REPEAT: Listens to your files repeatedly or randomly.
Replacement of Battery
Additional Information
Specification
Power consumption
|
Refer to the main label.
---|---
AC adapter| • Model : DA-50F25
• Manufacturer: Asian Power Devices Inc.
• Input : 100 – 240 V – 50 – 60 Hz
• Output: 25 V 2 A
• Model: MS-Z2000R250- 05000-P
• Manufacturer: MOSO POWER SUPPLY TECHNOLOGY CO., LTD.
• Input : 100 – 240 V – 50/60 Hz
• Output: 25 V 2 A
Dimensions (Wx Hx D)| Approx.
1060.0 mm X 57.0 mm X 85.0 mm With foot (41.7 inch x 2.2 inch x 3.3 inch)
Bus Power Supply (USB)| 5 V 500 mA
Amplifier (Total RMS Output power)| 420 W RMS
Design and specifications are subject to change without notice.
Rear Speakers Ready
Ready for surround sound with Rear
Speakers Kit sold separately. (SPK8-S)
OPEN-SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open-source
licenses, that are contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers, and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
opensource@lge.com.
This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.
Industry Canada Statement
[For having a wireless function (WLAN, Bluetooth,…)] This device contains
license-exempt transmitter(s)/ receiver(s) that comply with Innovation,
Science and
Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having a wireless function (WLAN, Bluetooth,…)] This equipment complies
with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20
cm (7.8 inches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For products having the wireless function using 5 GHz frequency bands] i. the
device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems;
ii. for devices with detachable antenna(s), the maximum antenna gain permitted
for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that
the equipment still complies with the e.i.r.p. limit;
iii. for devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as appropriate; and
iv. [for devices operating in the band 5250-5350 MHz having an e.i.r.p.
greater than 200 mW] antenna type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the e.i.r.p. elevation mask
requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly
indicated.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
www.lg.com
Copyright © 2020-2021 LG Electronics Inc. All Rights Reserved.
LG Customer Information Center
1-888-542-2623
CANADA
Register your product Online!
www.lg.com.
SN6Y.DCANLLK_SIM_ENG_MFL71669651.indd 5
Documents / Resources
| LG
SN6Y Wireless
Soundbar
[pdf] User Guide
SN6Y Wireless Soundbar, SN6Y, Wireless Soundbar
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>