Tru-Test SRS2i Stick Reader User Guide
- June 5, 2024
- Tru-Test
Table of Contents
- Tru-Test SRS2i Stick Reader
- Unpacking the box
- Charging the battery
- Getting around
- Recording EID tags
- Bluetooth connection
- Viewing sessions
- Getting information off
- Datamars Livestock cloud software
- Online training
- Modifying settings
- Bluetooth
- Maintenance and servicing
- Compliance
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Tru-Test SRS2i Stick Reader
Unpacking the box
Check that you have all of these items. If anything is missing, contact your supplier.
Charging the battery
Use only the power adaptor and cables supplied.Do not charge the battery if
the temperature is less than 5 °C (41 °F), or
greater than 40 °C (104 °F).
Getting around
Parts of the stick reader
The Home screen
When you first switch on the stick reader, the Home screen is displayed:
Scroll through the options using the arrow keys and and choose an option using
theSelect button.
Recording EID tags
Ways of using the stick reader
The stick reader can be used in two ways:
- Standalone – the stick reader saves each scanned tag in its internal memory. These records can be transferred afterwards, as described in Section 7 – Getting information off.
- Connected – the EID reader immediately transmits every scanned tag to a connected device, such as a weigh scale indicator.
Recording EID tags (standalone)
You should start a new session file each time you begin a new scanning session.
- Press to switch on the stick reader.
- On the Home screen, press and select New Session.
- Press
- Press the Read button while holding the stick reader near to an EID tag.
The ElD tag number is read and recorded. An For H wll appear in the top left
of the screen (depending on whether the
tag type is FDX-B or HDX). The stick reader beeps once (if the buzzer setting
is enabled [default|)
When scanning EID tags, if animals are moving quickly through a race or into a pen, you can hold down the Read button continuously. Scanning will stop when the Read button is released.
Displaying VIDs (visual IDs) during scanning
EID/VID pairs can be transferred from the PC to the stick reader prior to
scanning using the Data Link PC software. This means that when an animal’s EID
tag is scanned, the corresponding VID number will be displayed automatically.
Bluetooth connection
The stick reader will automatically connect to any Tru-Test Bluetooth enabled weigh scale indicator, or any other device, with which it has previously been paired (when in BT Auto mode – default). In order to manually establish a Bluetooth wireless connection (if you are using a non-Tru-Test weigh scale indicator, or you are having trouble establishing a Bluetooth wireless connection):
- With both devices off, position the stick reader close to the other device.
- Switch on the device and, if necessary, check that its Bluetooth setting is enabled.
- Switch on the stick reader.
- Select Settings, then Bluetooth to display the Bluetooth Settings screen.
- Select Search for devices. A list of available devices will be displayed.
- Select a device. Wait for up to one minute until the two devices are paired. When pairing is complete, the Bluetooth indicator light above the Read/Select button will illuminate blue.
- Use the stick reader to scan an EID tag in order to test the connection.
Always turn on the device you are trying to pair with first, BEFORE the stick reader.
Viewing sessions
You can view information collected during a session in the Sessions screen.
- If necessary, press to go to the Home screen.
- Select Sessions. A list of sessions is displayed.
- Select a session to view:
Getting information off
There are two ways to get information off the stick reader.
Data Link PC software
Data Link app for mobile devices
The Tru-Test Data Link app is available to download for free from the Google Play store (Android devices) or the Apple App store (Apple iOS).
Datamars Livestock cloud software
View your data online, anywhere, with Datamars Livestock. Datamars Livestock
allows you to monitor animal weight gains and track performance to target
weights. Monitor animals in groups, and act early if they fall behind target;
or track
individually to identify top performers and slow growing stock.
Getting help
Help articles and videos
The Datamars Livestock Help Centre provides searchable articles and videos to
help you when you need it. The help centre provides instant support for our
apps, software and products. Access the help centre via the mobile phone app
or go to
support.livestock.datamars.com
Some topics in the Datamars Livestock Help Centre are available in [language– French, German,Spanish, Portuguese]
Online training
The Datamars Livestock Training Academy provides easy, accessible online training modules. You can work at your own pace to learn about our products and solutions. Register for free at livestock.datamars.com/training- academy
The Datamars Livestock Training academy is available in [language – French, German, Spanish, Portuguese]
Online troubleshooting
For personalised troubleshooting and advice, chat with us directly. In the
mobile phone app, tap on , then . On any of our websites, in the Datamars
Livestock Help Centre or in the Datamars Livestock Training Academy, click on
in the bottom right-hand corner of the screen.
Modifying settings
When shipped, the stick reader is set up to simply scan EID tags. You can change the way that the stick reader is set up to suit the task that you are about to perform.
Settings menu
To modify the settings, from the Home screen, select Settings.
After you have changed any settings, you can save these as your own custom
favourite. You can then apply this favourite next time that you want to do the
same task. General
Change the Date/Time, Language/Country, Auto Off, Vibration and Buzzer
settings. View the stick reader Firmware details.
Bluetooth
Bluetooth
Auto** – Automatically connect to the Bluetooth-enabled device most recently
used or to a Tru-Test Bluetooth enabled weigh scale indicator.Off – Turn off
Bluetooth wireless connectivity.Manual – Manually search for a Bluetooth
enabled device and accept incoming Bluetooth connections.
Search for Devices – Manually search for a Bluetooth-enabled device within
range (see row above).
Paired Devices – Display previously connected (paired) devices.
Advanced
- Connect Mode: Default** – set this mode to connect to weigh scale indicators and most software systems. HID (Human Interface Device) – set this mode if you want the scanned EID tag to be automatically transmitted to a spreadsheet (e.g. Excel), or another device that has not directly integrated with the stick reader.
- Output: Default** – Leave this set to Default unless you have been instructed to change it by a Datamars representative.
Tag Reading
Read Mode
- Standard: Press the Read button to scan a tag. Hold down the Read button to continuously scan tags.
- Continuous: Press the Read button to continuously scan tags. Scanning will only stop when the Read button is pressed again.
- Single :Press the Read button to scan a single tag. Even if you hold down the Read button, another tag will not be scanned.
Tag Format – Format and example shown:
- Decimal: 964 155000012939
- Decimal2: 964155000012939
- Hex: 8000F66416B8808B
- ISO: 1000000964155000012939
- ISO23: A0000000964000000123456 (animal) or R0000000964000000123456 (non-animal)
Allow Duplicates
- No – Set to ensure that an EID is not recorded multiple times in the same session.
- Yes – Set to allow EIDs to be recorded multiple times in the same session.
ISO Synchro
- On – Set this mode to enable wireless synchronization with panel readers.
- Off ** – Turn off wireless synchronization with panel readers.
Default settings marked **
Maintenance and servicing
Backing up your information
We strongly recommend that you regularly back up the data on your stick reader by transferring it to a PC using Data Link PC software.
Updating your software
We recommend that you regularly update the stick reader software so that you
keep up with the latest features and improvements.
To update the software:
- Connect the stick reader to a PC using the cable supplied.
- Launch Data Link on your PC.
- Click Tools / Updates.
- Follow the step-by-step instructions.
For more information, see the Data Link help.
When updating software, the data on your stick reader will remain intact. However, we strongly recommend that you transfer the information on your stick reader onto a PC before updating.
Caring for the stick reader
- Wipe the stick reader clean using a damp cloth, warm water and soap. Other cleaners may damage the case or screen.
- Do not immerse the stick reader in water.
- Do not leave the stick reader where it may be exposed to extreme temperatures(e.g. on the dashboard of a vehicle).
- Store the stick reader in a cool, dry place.
- Fit the dust cap when there are no cables connected to the stick reader. This will prevent moisture and dirt from
entering the socket.
Europe – Instructions for disposal of product
This symbol on the product or its packaging indicates that this product (and
its batteries) must not be disposed of
with other waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help
conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local
city recycling office or the dealer from whom you purchased the product.
This product incorporates both a lithium-ion (LiNiMnCoO2) rechargeable battery and a lithium metal (CR1220 35 mAh) button/coin cell battery. For instructions on how to dismantle this product for recycling, email service.dept@datamars.com
Compliance
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
- Any changes or modifications not expressly approved by Datamars could void the user’s authority to operate the equipment
FCC Warning
Note: Users are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Responsible Party in the USA
This product is supplied by: Datamars Inc, 528 Grant Road Mineral Wells, Texas
76067, UNITED STATES.
Toll free: 800 874 8494
ISED Canada Notice
This radio transmitter, model SRS2i-1, has been approved by Innovation,
Science and Economic Development Canada to operate only with its integral
antenna. This device complies with Innovation, Science and Economic
Development Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
- This device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
UK Declaration of Conformity
Hereby, Datamars declares that the radio equipment type SRS2i-1 is in
compliance with the relevant statutory
requirements. The full text of the declaration of conformity is available at
the following internet address
http://livestock.tru-test.com/en/compliance
UK Importer: Datamars UK, Pheasant Mill, Dunsdale Rd, Selkirk TD7 5DZ, United Kingdom
EU Declaration of Conformity
Hereby, Datamars declares that the radio equipment type SRS2i-1 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://livestock.trutest.com/en/compliance
EU Importer: Datamars Slovakia s.r.o. Dolné Hony 6, 949 01 Nitra, Slovak Republic
This radio equipment emits a maximum of 0.7 mW e.i.r.p. in the frequency band
134.18 to 134.22 kHz and a maximum of 18 mWe.i.r.p. in the frequency band 2.40
to 2.48 GHz.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Datamars SA and its
subsidiaries is under license. Other trademarks and trade names are those of
their respective holders. All trademarks with an * are neither owned by nor
licensed to Datamars SA and belong to their respective owners.
References
- A smarter future. | Datamars Livestock
- Training Academy | Datamars Livestock
- Help Centre | Datamars Livestock
- Tru-Test Livestock Management
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>