Lavaudio DS600 Desktop Audio Decoder User Manual
- June 5, 2024
- lavaudio
Table of Contents
Lavaudio DS600 Desktop Audio Decoder User Manual
What In The Box
Control Function
- Plug in the DC power cable, then choose to connect DS600 with PC through the USB cable or connect with CD player through Coaxial cable.
- The RCA OUT can connect with a headphone amplifier, a power amplifier and other device.
- Adjust a proper volume, then you can enjoy HiFi music.
Note: For Windows users, the driver need to be installed when first using. Please refer to “DS600 Driver & Installation Guide” and “DS600- Player Foobar2000 & JR”.
System Setting Interface
-
Filter mode when playing PCM formatIMODE1-MODE7.
MODE] 1: anodizing fast roll-off filter
MODE2 : linear phase fast roll-off filter
MODE3 : linear phase slow roll-off filter
MODE4 : minimum phase fast roll-off filter
MODES5 : minimum phase slow roll-off filter
MODE6 : corrected minimum phase fast roll-off filter
MODE7 : brick wall filter -
Bluetooth system settings
-
Screen saver settings (Optional screen always on or automatic screen off)
-
Factory data reset(The default values of the system parameters of 1- are:MODE1,Bluetooth on, Automatic screen off.)
-
Note: When entering the system parameter setting interface, it will automatically exit it if there is no operation after 10 seconds
Troubleshooting
| Troubleshooting | Cause Analysis | Solution |
|---|---|---|
| Noise when COAX / OP input | Signal format error or out of range | Check the |
input signal format
USB does not recognize| Incorrect USB connection| Check or replace the USB
cable
Computer USB port damaged| Change another interface
OS problem| Reinstall the OS
Driver problem| Reinstall driver
No sound when USB input| Computer volume is too low| Adjust volume
Intermittent when USB input| PC is busy and the machine is hung| Waiting for
computer recovery
USB input, pop sound| Software problem| Update motherboard drivers
and system patches
If you still have problem or question, please contact us
(support@1mii.com)
Specification
USB input| 16bit/44.1kHz-32bit/768kHz
DSD64-DSD512(Native)
---|---
Optical/ Coaxial input| 16bit/44.1kHz-24bit/192kHz
Bluetooth input| AAC/SBC/APTX/APTX LL/APTX HD/LDAC
Power| DC5V/0.5A- 0.25W
Size| 123.6x110x27.3mm
Weight| 510g
Product Parameter
| Output Voltage | 2.8Vrms@OdBFS |
|---|---|
| THD+N | <0.0002°/0@1 kHz A-weighing |
| Noise | <2uVrms@A-weighing |
| Crosstalk | -120dB@1 kHz |
| SNR | 122dB (B-Weighdted) |
TND+N
IMD Level Sweep (SMPTE)
Signal To Noise Ratio
Scan the code to get more information
1Mii Technologies Limited
We hope you never the need, but if you do, our service is friendly and hassle- free
FCC ID: 2AUFR-DS600
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>