Lavaudio DS200Pro Wireless Audio Adapter User Manual
- June 5, 2024
- lavaudio
Table of Contents
Lavaudio DS200Pro Wireless Audio Adapter
ln the box
Control functions
-
Use an audio cable to connect DS200Pro to the audio input of a receiver or on active speaker.
-
Connect DS200Pro to the power supply, the device will turn on automatically.
-
Pairing – pair DS200Pro with Bluetooth- enobled phone/pc/tablet or other audio source devices.
• First use: DS200Pro will enter the pairing mode after power on automatically.
(LED light flashes red and blue)
• Turn on the Bluetooth of cell phone or other device. and then select “DS200Pro’ to connect. -
wait for the device to connect successfully and enjoy the music.
How to enter pairing mode?
First long press for 3s to turn oft DS200Pro, then long press@ for 3s again to
get it to the pairing mode (Release your finger till the LED flashes red a nd
blue).
How to pair and connect two Bluetooth audio devices at the same time?
- Long press tor 3s to turn oft 0s200 Pro.
- Long press for 3s again to enter the pairing mode ( LED will flash red and blue).
- Turn on Bluetooth on the second a udio device. and then select ‘DS200Pro” to pair.
- Bock to the first audio device, top ‘DS200Pro· on the Bluetooth list to reconnect aga in.
- wait for the device to connect successfully and enjoy the music. (Note: You can only play music on one device at a time. To switch to another play device. please pause the current one)
The Bluetooth® word mark a nd logos are owned by the Bluetooth SIG, Inc. and any use of suc h marks by IMii Ltd. is under license. Other trademark:s and trade names are those of their respective owners
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: ( l) This device may not cause harmful
interference, and (2) This device must accept any interference. Changes or
modifications not expressly approved by lMii Ltd. will void the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/ TV technician for help.
This product, like other radio devices, emits radiofrequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
CE
1 Mii Ltd. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014 / 53 /
EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.lmii.com
In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.
Shenzhen lMii Technologies Limited
Baoan District, Shenzhen 518100 China
EU Importer:
eVatmaster Consulting GmbH Bettina. 30,60325 Frankfurt am Main, Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, c not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre.
Do not dispose the used appliance together with household waste.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/ or its subsidiaries.
eVatmaster Consulting GmbH Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
Scan the code to get more information.
Manufacturer: Shenzhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
Dist., Shenzhen, China
Operator: Shenzhen lMii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong
Kong Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
support@lmii.com web:
www.lmii.com
FCC ID: 2AUFR-RT933
Documents / Resources
|
Lavaudio DS200Pro Wireless Audio
Adapter
[pdf] User Manual
DS200Pro, Wireless Audio Adapter
---|---
|
Lavaudio DS200Pro Wireless Audio
Adapter
[pdf] User Manual
DS200Pro Wireless Audio Adapter, DS200Pro, Wireless Audio Adapter, Audio
Adapter, Adapter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>