makita DML812 Cordless Flashlight Instruction Manual

: June 5, 2024
: Makita

Table of Contents

makita DML812 Cordless Flashlight
Explanation of general view
SPECIFICATIONS
Applicable battery cartridge
Operating time
SAFETY WARNINGS
FUNCTIONAL DESCRIPTION
Lighting up the light
Selecting the mode
Battery protection system
MAINTENANCE
OPTIONAL ACCESSORIES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

makita DML812 Cordless Flashlight

makita-DML812-Cordless-Flashlight-PRODUCT

Explanation of general view

Battery cartridge
Red indicator
Battery release button
Indicator lamps
Check button
Switch
MODE button
Flood mode
Spot + Flood mode
Spot mode
Hook
Strap
Ring

SPECIFICATIONS

Model:	DML812
LED	Spot : 9W × 1 & Flood : 1 W × 16
Dimensions (L × W × H)	119 mm × 115 mm × 313 mm
Rated voltage	D.C. 14.4 V/18 V
Net weight	1.2~1.6 kg

Due to our continuing program of research and development, the specifications herein are subject to change without notice.
Specifications may differ from country to country.
The dimensions are with BL1860B and with the head facing upward.
The weight may differ depending on the attachment(s), including the battery cartridge The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge

BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B / BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B Some of the battery cartridges listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire.

Operating time

Battery cartridge

| Operating time (Approximately)
---|---
Spot| Flood| Spot + Flood| Strobe
BL1415N| 1.9 hours| 1.4 hours| 1.2 hours| 1.6 hours
BL1430, BL1430B| 3.0 hours| 2.4 hours| 1.9 hours| 2.7 hours
BL1440| 4.5 hours| 3.5 hours| 3.0 hours| 4.0 hours
BL1450| 6.0 hours| 4.5 hours| 3.5 hours| 5.0 hours
BL1460B| 6.5 hours| 5.0 hours| 4.0 hours| 5.5 hours
BL1815N| 2.5 hours| 1.9 hours| 1.5 hours| 2.2 hours
BL1820, BL1820B| 3.0 hours| 2.6 hours| 2.1 hours| 2.9 hours
BL1830, BL1830B| 4.5 hours| 3.5 hours| 2.9 hours| 4.0 hours
BL1840, BL1840B| 6.5 hours| 5.0 hours| 4.0 hours| 5.5 hours
BL1850, BL1850B| 8.5 hours| 6.5 hours| 5.0 hours| 7.0 hours
BL1860B| 10 hours| 7.5 hours| 6.0 hours| 8.5 hours

The operating times in the above table are a rough guideline. They may differ from actual operating times.
Operating times may differ depending on battery type, charging status, and usage condition.
Battery cartridge may differ from country to country.

Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.

Read instruction manual
Indoor use only
Only for EU countries Due to the presence of hazardous components in the equipment, waste electrical and electronic equipment, accumulators and batteries may have a negative impact on the environment and human health. Do not dispose of electrical and electronic appliances or batteries with household waste! In accordance with the European Directive on waste electrical and electronic equipment and on accumulators and batteries and waste accumulators and batteries, as well as their adaptation to national law, waste electrical equipment, batteries and accumulators should be stored separately and delivered to a separate collection point for municipal waste, operating in accordance with the regulations on environmental protection. This is indicated by the symbol of the crossed-out wheeled bin placed on the equipment.
Optical Radiation (UV and IR). Minimize exposure to eyes or skin.
Do not stare at operating lamp.
Use appropriate shielding or eyes protection.
Take particular care and attention!

SAFETY WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following

READ ALL INSTRUCTIONS.

Do not look into the light, or do not expose the light to eyes. Eyes may be damaged.
Do not cover or clog the lit tool with cloth or carton, etc. Covering or clogging it may cause a flame.
The tool is not waterproof. Do not use it in damp or wet locations. Do not expose it to rain or snow. Do not wash it in water.
Do not touch the inside of the flashlight head with tweezers, metal tools, etc.
Do not give the tool a shock by dropping, striking, etc.
When the tool is not in use, always switch off and remove the battery cartridge from the tool.
Battery tool use and care

Prevent unintentional starting. Ensure the switch is in the off position before connecting to battery pack, picking up or carrying the machine. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing machine. Such preventive safety measures reduce the risk of starting the appliance accidentally.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use appliance only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help. quid ejected from the battery may cause irritation or burns.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C (265°F) may cause explosion.
Follow all charging instructions and do not charge the battery pack or appliance outside
of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
Do not charge battery in rain, or in wet locations.
Do not handle charger, including charger plug, and charger terminals with wet hands.
Do not charge the battery outdoors.

Important safety instructions for battery cartridge

Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
Do not disassemble battery cartridge.
If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight.
Do not short the battery cartridge:
Do not touch the terminals with any conductive material.
Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
Do not expose battery cartridge to water or rain.
Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 °C (122 °F).
Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
Be careful not to drop or strike battery.
Do not use a damaged battery.
The contained lithium ion batteries are subject to the Dangerous Goods Legislation requirements. For commercial transports e.g. by third parties, forwarding agents, special requirement on packaging and labeling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging.
When disposing the battery cartridge, remove it from the tool and dispose of it in a safe place. Follow your local regulations relating to disposal of battery.
Use the batteries only with the products specified by Makita. Installing the batteries to non-compliant products may result in a fire, excessive heat, explosion, or leak of electrolyte.
If the tool is not used for a long period of time, the battery must be removed from the tool.

CAUTION: Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger.

Tips for maintaining maximum battery life

Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power.
Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life.
Charge the battery cartridge with room temperature at 10 °C – 40 °C (50 °F – 104 °F). Let a hot battery cartridge cool down before charging it.
Charge the battery cartridge if you do not use it for a long period (more than six months).

FUNCTIONAL DESCRIPTION

Installing or removing battery cartridge

CAUTION: Always switch off the tool before removing of the battery cartridge.

CAUTION: Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury.

To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge. To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the upper side of the button, it is not locked completely.

CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you.

CAUTION: Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly.

Indicating the remaining battery capacity

NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity.

Lighting up the light

CAUTION: Do not look in the light or see the source of light directly.

Push the power button to light up the light. To turn off the light, push the power button again.

NOTE: The appliance turns on at the same mode as the last setting.

Selecting the mode

During the light is on, press the MODE button to cycle through spot, flood and spot + flood settings.

Turn on strobe lighting
Press and hold the MODE button until the appliance turns to strobe mode. To turn off the strobe mode, simply press the MODE button.

makita-DML812-Cordless-Flashlight-4

Battery protection system

The tool is equipped with the protection system, which automatically cuts off the output power for long service life. The light goes off during operation when the remaining battery capacity gets low. This is caused by the activation of the protection system and does not show trouble. Remove the battery cartridge from the tool and charge it.

MAINTENANCE

CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.

NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country.