Easybaby EB-FS02 Steam Blender User Manual

Easy baby EB-FS02 Steam Blender

PRODUCT COMPONENT

1.  Anti-slip feet
2.  Main body
3.  Panel decoration ring
4.  Water tank
5.  Connector
6.  Water tank cover
7.  Control panel
8.  Bowl
9.  Rotor cover
10.  Rotor
11.  Blade
12. Bowl lid
13. Rotor seal
14. Bowl handle
15. Egg rack
16.  Spoon

Before first use

1.  Wash the bowl and blender blade with soapy water and rinse thoroughly
2.  Fill the water tank with tap water, rinse and discard water.
3.  It is recommended to sterilize before first use by steaming empty steamer bowl for 15 minutes. See HOW TO USE A ( Filling The Water tank ) and B ( Steam).

HOW TO USE

FILLING THE WATER TANK

• Turn the water tank cover counterclockwise to open the water tank / turn it toward the open padlock (fig 1 ).
• Then pour 230 ml of drinking water or follow the MAX limit marking on the water tank (fig 2).
• Put the water tank cover on and turn it clockwise to lock the tank cover / turn it towards the locked padlock (fig 3).
  Ensure the water tank cap is locked properly before starting the appliance.

STEAM AND BLEND ( AI )

•  Fill water into the water tank (Step A. FILL THE WATER TANK)
•  Arrange the blade inside the bowl (fig. 1). Make sure the position of the knife hole with the rotor is properly attached.
•  Place food ingredients into the bowl (fig 2), not exceeding the MAX limit on the bowl.
•  Put the lid on with handle of the lid close to the bowl handle. Lock the lid by pushing it to the right (fig. 3).
•  Place the bowl on the machine with the bowl handle positioned close to the engine lock (fig. 4). Lock the bowl and the machine by pulling the bowl handle clockwise (fig. 4a).
• Rotate the panel to and then press it (fig. 5). The machine will steam first and then blend automatically（steam 30 minutes, blend in 5 cycles, each cycle 12 seconds.)
• After completion, you will hear “Beep” sound. Ensure the bowl is positioned correctly onto the machine. Machine can operate only when bowl is positioned correctly.

BLEND

•  Arrange the blade inside the bowl (fig. 1). Make sure the position of the knife hole with the rotor is properly attached.
•  Place food ingredients into the bowl (fig 2), not exceeding the MAX limit on the bowl.
•  Add some distilled water into the bowl.
•  Put the lid on with handle of the lid close to the bowl handle. Lock the lid by pushing it to the right (fig. 3).
•  Place the bowl on the machine with the bowl handle positioned close to the engine lock (fig. 4). Lock the bowl and the machine by pulling the bowl handle clockwise (fig. 4a).
• Rotate the panel to and press it (fig 5).The machine will start to blend. ( The default setting is  blend in 5 cycles, each cycle 12 seconds.)  This machine can’t blend the hard food such as nuts, mast and so on.

EGG BOIL

•  Fill water into the water tank (Step A. FILL THE WATER TANK)
•  Arrange the egg rack inside the bowl (fig.1).
•  Place eggs on the rack (fig 2)
•  Put the lid on with handle of the lid close to the bowl handle. Lock the lid by pushing it to the right (fig. 3).
•  Place the bowl on the machine with the bowl handle positioned close to the engine lock (fig. 4). Lock the bowl and the machine by pulling the bowl handle clockwise (fig. 4a). Rotate the panel to choose the steaming time 15 minutes and press it (fig 5).The machine will start steaming 15 minutes (fig 5)

DEFROST AND WARM FOOD

•  Fill water into the water tank (Step A. FILL THE WATER TANK)
•  Arrange the egg rack inside the bowl (fig 1).
•  Place food container on the egg rack (fig 2)
•  Put the lid on with handle of the lid close to the bowl handle. Lock the lid by pushing it to the right (fig. 3).
•  Place the bowl on the machine with the bowl handle positioned close to the engine lock (fig. 4). Lock the bowl and the machine by pulling the bowl handle clockwise (fig. 4a).
•  Rotate the panel to choose the steaming time and press it (fig 5).The machine will start to warm the food. ( The steaming time option is 15-20-25-30 minutes.) Ensure the bowl is positioned correctly onto the machine. Machine can operate only when bowl is positioned correctly.

STERILIZE

•  Fill water into the water tank (Step A. FILL THE WATER TANK)
•  Arrange the egg rack inside the bowl (fig 1).
•  Place bottles and accessories on the egg rack (fig 2)
•  Put the lid on with handle of the lid close to the bowl handle. Lock the lid by pushing it to the right (fig. 3).
•  Place the bowl on the machine with the bowl handle positioned close to the engine lock (fig. 4). Lock the bowl and the machine by pulling the bowl handle clockwise (fig. 4a).Rotate the panel to choose steaming time 15 minutes and press it (fig 5).The machine will start to
• Ensure the bowl is positioned correctly onto the machine. Machine can operate only when bowl is positioned correctly.

HOW TO CLEAN

This product and the individual parts of this product are not suitable for cleaning in a dishwasher. Also not for cleaning with steam or other forms of sterilization.

CLEANING BOWL AND BLADE

•  Cleaning the bowl can be done by opening the lid of the bowl following the direction shown in Figure 1.
•  Remove the blade from the bowl. The inside of the blade’s funnel can be washed with a small brush and rinsed under running water as shown in Figure 2.
•  There is a rotor inside the bowl. To clean the rotor, one hand holds the rotor from inside the bowl and another hand rotates the rotor cover outside (at the bottom of the glass) to the left, shown in Fig. 3.
•  All parts mentioned can be washed with soapy water and rinsed thoroughly.

CLEANING THE WATER TANK

•  It is advisable to clean the water tank after steaming.
•  Ensure the machine power cord has been unplugged.
•  Turn the water tank cover counterclockwise to open the water tank / turn it toward the open padlock (fig 1 ).
•  Remove the remaining water from the water tank then wipe dry with a clean cloth (fig 2).
• Do not immerse the machine in water and do not rinse the machine under running water. Simply clean with a damp cloth.

DESCALING THE WATER TANK

1.  Make sure the machine power cord has been unplugged.
2.  Mix white vinegar and drinking water with a ratio of 1:1. The maximum mixture solution is 200 ml.
3.  Pour the solution into the water tank.
4. Close the water tank and wait for 6 hours / overnight or until all limescale has dissolved.
5. Pour used solution out of the water tank.
6. If the limescale build-up has not completely dissolved, repeat descaling cycle from steps 1 to 5 above as necessary.
7. Rinse water tank with clean water. Repeat several times until there is no solution left in the tank.
8. Fill the tank with 200 ml drinking water. Steam for 20 minutes with the steamer bowl empty. This is done to remove the remaining vinegar. See HOW TO USE A ( Filling The Water Tank ) and F ( Sterilization )

STEAMING TIME REFERENCE

Steaming time can be adjusted as needed. The processing time may depend on the amount of food and the size of food to cook. The food should be cut into maximum 1.5cm cubic size.

PROBLEM-SOLVING

The engine does not start:

•  Ensure the machine is connected to electricity.
•  Ensure the lid on the bowl is positioned properly.
•  Ensure the bowl and the machine is positioned properly.

Steam does not enter the steamer glass:

•  Ensure the water tank is filled with enough water.
•  Ensure the tank cover is closed properly.

Steam coming out of the water tank:

•  Ensure the bowl and machine is positioned properly.
•  Ensure the tank cover is closed properly.

Food ingredients are not fully cooked :

•  Ensure the amount of food does not exceed MAX glass limit.
•  Ensure food ingredients are cut into maximum 1.5 cm cubic size.
•  Ensure there is still enough water in the tank.
•  Increase steaming time to cook longer.

The blender doesn’t work:

•  Ensure the lid on the bowl is positioned properly.
•  Ensure the bowl and the machine is positioned properly.
•  Ensure the blender blade is placed correctly.
•  Ensure the steaming process is complete.

Steaming stops in the middle of process :  Wait for 1 minute before attempting to blend again.

•  If the water in the tank runs out, pour water into the tank to continue steaming.
•  Increase steaming time.

CAUTION

Please read this user manual carefully before using and save it for future reference.

•  This product is only used for home activities, not for commercial or industrial use.
•  This product and the individual parts of this product are not suitable for cleaning in a dishwasher. Also not for cleaning with steam or other forms of sterilization.
•  If the water tank cover is not closed properly, the hot steam will not flow into the bowl. Ensure the water tank cover is properly installed.
•  If the blade gets stuck or if you need to use your hands anywhere near the blade, always unplug electricity before touching the blade or any other components near the blade.
•  Use food container to warm or thaw food.
•  Allow appliance to cool down for 10 minutes after one steaming cycle before start steaming again.
•  Do not blend for more than 30 seconds at a time.
•  Use only water to fill up the water tank.
•  Do not steam without water in the tank.
•  Do not add water into water tank during steaming as hot water and steam can blow out when the tank cover is opened.
•  When steaming is complete, hot steam will continue to come out of the steam hole in the water tank cover and the steam hole in the bowl for a few moments. Be careful when lifting the bowl off the main unit.
•  Beware of hot steam coming out of the bowl when opening its cover.
•  Beware of hot steam coming out of the water tank when opening its cover.
•  Do not use this appliance if the plug, power cord or machine is damaged.
•  Keep appliance out of reach of children.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>