Diley Dreams YCC365 Phobos Babyfoon IP Camera User Manual

Table of Contents

Diley Dreams YCC365
Phobos-Babyfoon-IP-Camera-PRODUCT

Diley Dreams YCC365 Phobos-Babyfoon-IP-Camera-
FIG-1

Search and download YCC365 Plus from App Store or Google Play. Or scan the QR codes below.

Account registration and login

Please register an account with a valid email address at your first use of this App, then log in.
Password must be at least 6 characters and no longer than 30 characters.
It must be a combination of letters and numbers.

Important

For all connection options, you will hear “Please configure camera by scanning code or AP hotspot” after the camera is powered on.
Use the pin to press and hold the “Reset” button for 5-6s to reset the camera if no voice prompts. You will hear “Reset Succes” at a successful reset.
This camera only supports 2.4GHz Wi-Fi.
For stable network connection, please make sure the camera and the mobile device are close to the router.

Step 1

Connect the mobile device to your Wi-Fi, then log in to YCC365 Plus.
Click “+” in the upper right corner, select “Intelligent camera” and “Device adding by scanning the code”.

Step 2

Tick if you have finished the above steps, click “Connect to the network”, then click “Connect to a network”. Select the Wi-Fi your mobile device is connected, enter the correct password and click “Next to continue”.

Tip: Click “Network testing” in the upper right corner of the “Connect to Wi-Fi” interface to check the status of your Wi-Fi connection.

Step 3

Align the QR code on your mobile device with the camera lens and keep a distance of 4-8 inches.

Step 4

Click “I heard the beep voice” to connect to the internet after 2 beeps from the camera. During the process, you will hear“Please wait for Internet connecting”.
When you hear “Internet-connected, welcome to use cloud camera”, the camera is connected successfully.

Step 1

Connect the mobile device to your Wi-Fi, then log in to YCC365 Plus.
Click “+” in the upper right corner, select “Intelligent camera” and “Addition of AP hotspot”.

Step 2

Tick if you have finished the above steps, click “Next”, then click “Next” to enter the Network configuration interface.

Step 3

Click “Go to the setting” to enter the network setting interface of the mobile device, then connect to ”CLOUDCAM_XXXX“ Wi-Fi.

Step 4

Tap to get back to YCC365 Plus to enter “Network configuration” interface, then click “Next” to continue.

Tip: There will be a pup-up window if the CLOUDCAM_XXXX Wi-Fi connection is failed. Diley Dreams YCC365 Phobos-Babyfoon-IP-Camera-
FIG-10

Step 5

Select the Wi-Fi your mobile device is connected to, enter the correct password, then click “Next”. The camera will connect to the internet after 2 beeps from the camera.
During the process, you will hear “Please wait for Wi-Fi connecting” and “Please wait for internet connecting”. When you hear “Internet is connected, welcome to use cloud camera”, the camera is connected.