Lenco DVP-9413 Portable DVD Player User Manual

Lenco DVP-9413 Portable DVD Player

Important Safety Instructions

• Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
• Warning: To prevent fire or electric shock hazards, do not expose the unit to rain or moisture. Do not expose the Adaptor and portable DVD to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the unit.
• Keep the portable DVD away from direct sunlight and heat sources such as radiators or stoves.
• Do not block the ventilation openings. Slots and openings on the unit are provided for ventilation. The openings should never be blocked by placing your portable DVD on a cushion, sofa, or other similar surfaces.
• Do not place the portable DVD on an unstable cart, stand, tripod, bracket, or table. The unit may fall, resulting in possible damage or injury.
• Never place heavy or sharp objects on the LCD panel or frame.
• Only use the AC adapter included with the portable DVD. Using any other adapter will void your warranty. The plug of the AC adaptor is used as the disconnect device, the disconnect device shall remain readily operable.
• Unplug the power from the outlet when the unit is not in use.
• Attention should be drawn to the environmental aspects of battery disposal.
• CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• WARNING: The battery (battery or battery or battery pack) shall not be exposed to excessive heat such as sunshine, fire, or the like.
• WARNING: Excessive sound pressure from earphones or headphones can cause hearing loss.
• WARNING: Only use attachments/accessories specified provided by the manufacturer, the portable DVD is supplied by an AC adapter, the AC adapter is used as the disconnect device, and the disconnect device shall remain readily operable.
• Caution: Danger of explosion if the battery is incorrectly replaced, replaced only with the same or equivalent type (Lithium battery)
• This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
• Power supply adaptor (For EU only)
• Manufacturer: Shenzhen Mass Power Electronics Limited
• Model number: EFF0900150E1 BA
• Use only the power supply listed in the user instructions

Safety Precautions

• WARNING RISK Of ElECTRIC SHOCK DO NOT OPEN
• EN
• WARNING
• THE RISK OF ELECTRIC SHOCK
• DOES NOT OPEN

Warning

• This digital video disc player employs a laser system.
• Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation Exposure.
• To prevent direct exposure to laser beam, do not open the enclosure. Visible laser radiation when open.
• Never stare directly into the laser beam.

Caution:

Do not install this product in a confined space such as a bookcase or similar unit. when the unit using by a child, parents must make sure to let the child understand all contents in the Instruction book and how the battery using to guarantee using the battery is correct all the time.

• Warning

  •  when finding the battery overheats, swells, or dour, please stop using the battery and contact the service center for getting a replacement. do not charge the battery in a place of insufficient

• ventilation such as the mattress, sofa, cushion, or soft mat we will not take any responsibility if the user incorrectly uses the battery, not following our warning instruction label on the battery case.  more than 250mm USB extension cord is prohibited to use for the USB port.

• Notes on Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission.
  This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by

• Macrovision Corporation is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

• SERIAL NUMBER:
  You can find the serial number on the back of the unit. This number is unique to this unit and not available to others. You should record the requested information here and retain this guide as a permanent record of your purchase.

• Model No.

• Serial No.

• Date of Purchase

• charge

• strong impact

• overheat at 40°C

WARNING
Do not ingest the battery, Chemical Burn Hazard (The remote control supplied with) This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. To prevent possible hearing damage, do not listen to high volume levels for long periods.

Identification of Controls **Main Unit

**

1. ►II PLAY/ PAUSE

2. STOP

3. SOURCE

4. VOL-

5. VOL+

6. MENU

7.  I◄/► (up/down/right-left)

   • Select an item in the menu. OK, the key confirms menu selection. when playing, VCD, or DVD, if available: right: fast forward left : fast reverse up previous track down : next track

8. ENTER

9. OPEN

10. SETUP

11. SD/MMC

12. USB

13. AV OUT

14. Earphone Socket

15.  COAXIAL

16. ON/OFF

17.  DC IN 9-12V

18. ANT

19. HDMI
    Remark: The HDMI connector is only for the transmission of the TV signal to an external screen!

20. Battery Charging Indicator
    Illuminates green flashing when the battery is charging.
    Illuminates green when the battery is fully charged.

21. Power Indicator
    Illuminates red when the unit is switched on.

Identification of Controls

1. SOURCE
   DVD/CARD/USB.

2. MUTE
   Disable Audio output.

3. 0-9 NUMBER BUTTON
   Selects numbered items in a menu.

4. INFO
   To display the playtime and status information.

5. 0+ RECALL
   In order to select a track 10 or greater, first press 1 O+, For example; select track 12, first press 1 O+, and then press the number 2 button.

6. PBC/FAV
   PBC on/off switch (VCD).

7. AUDIO
   DVD: Press AUDIO repeatedly during playback to hear a different audio language or audio track, if available.
   CDNCD: Press AUDIO repeatedly during playback to hear a different audio channel (Left, Right, Mix, Stereo).

8. PLAY/PAUSE

   • Press PLAY/PAUSE once to pause playback, pressing PLAY/PAUSE a second time will resume the playback.

9. STOP

   • When this button is pressed once, the unit records the stopped point, from where playback will resume if PLAY is pressed afterward. But if the STOP button is pressed again instead of PLAY there will be no resume function.

10. STEP/TV/RADIO

    • Step the motion into DVD mode.

11. VOL+

    • Adjust volume

12. Forward Skip

    • Go to the next chapter/ track.

13. Reverse Skip

    • Go to the previous chapter/track to the beginning.

14. BUTTON

    • BUTTON allows skipping ahead at 5-level speed (X2->X4->X8->X16->X32->PLAY),

15. BUTTON

    • Press the BUTTON allows skipping back at 5-level speed (X2->X4->X8->X16->X32->PLAY), press

16. PLAY to return to normal playback.
    Turn on/off the power.

17. SEARCH
    Go to time point, title or chapter you want in DVD Mode.

18. SUBTITLE
    Press SUBTITLE repeatedly during playback to see different subtitle languages.

19. ANGLE
    DVD: Pressing ANGLE will change the view angle, on DVDs that support this feature.

20. TITLE
    Return to DVD title menu.

21. OK
    Confirms menu selection.

22. SETUP
    Accesses or removes setup menu.

23. VOL­

    • Adjust volume

24. REPEAT

    • Press REPEAT during playback to select a desired repeat mode.
    • DVD: you can play select repeat chapter/title/all.
    • CDNCD: you can select repeat track/all.
    • Mp3: you can select repeat shuffle/random/single/repeat one/repeat folder/folder.

25. SLOW
    Press Slow repeatedly to enter slow playback, and cycle between different speeds. The speeds are 1 /2, 1/4, 1/8, 1/16, and normal.

26. PROGRAM
    DVDNCD/CD: The program function enables you to store your favourite tracks from the disc. Press the PROGRAM button, then PROGRAM MENU will appear on screen, now you can use the number key to direct input the titles, chapters or tracks number and select PLAY option. TO resume normal playback, press PROGRAM and select clear program option on the program menu, press PROGRAM again to exit program menu, Mp3 has function Folder/File list.

27. ZOOM
    DVD-CD: Use ZOOM to enlarge or shrink the video image.

28. Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture.

29. Each press of the ZOOM button changes the TV screen in the following sequence:

2X size—-+ 3X size—-+ 4X size —-+ 1/2 size —-+ 1/3 size—-+ 1/4size—-+ normal size JPEG: Use ZOOM to enlarge or shrink the picture. 1. Press ‘ZOOM’. Used 11 to enlarge, or shorten the picture. Use the .6. T ◄ ► button to move through the zoomed picture.

• RED/GREENNELLOW/BLUE KEY Some specific functions in DVB mode.

SETUP Menu Setting

General Setup Page

• Press SETUP to get the setup menu. Use direction buttons _. T ◄ ► to select the preferred item. After
• finishing the settings, press SETUP again to the normal display.

The following menu items can be changed:

• GENERAL: selects the GENERAL PAGE menu.
• AUDIO: selects the AUDIO PAGE menu.
• VIDEO: selects the VIDEO PAGE menu.
• PREFERENCE: selects the PREFERENCE PAGE menu.
• General Setup Page
• TV DISPLAY: selects the aspect ratio of the playback picture.

1. PAN SCAN: if you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.
2. LETTERBOX: if you have a normal TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed on a widescreen display.
3. TFT DISPLAY: Selects the aspect ratio during playback.
4. Angle Mark: Displays current angle setting information on the right-hand corner of the TFT screen if available on the disc.
5. OSD Language: You can select your own preferred language settings.
6. Closed Captions: Closed captions are data that are hidden in the video signal of some discs. Before you select this function, please ensure that the disc contains closed captions information and that your TV set also has this function.
7. Screen Saver: This function is used to turn the screen saver On or Off. If this function is switched to ON, the DVD will resume play on the last known position, when the unit was stopped, powered down or the DVD was reinserted
8. Auto Standby: This function is used to select auto-standby settings after 3 or 4 hours.
9. 3 HOURS: the unit will turn to standby mode after 3 hours if there is no interaction from user within this period of time.
10. 4 HOURS: the unit will turn to standby mode after 4 hours if there is no interaction from user within this period of time.
11. OFF: the auto standby function is disabled, and the unit will stay in “on” mode even if no interaction from user.

Audio Setup Page

1. Downmix: This option allows you to set the stereo analog output of your DVD Player.
2. LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.
3. Stereo: Select this option when output delivers sound from only the two front speakers.
4. Digital Output The function is used to select the SPDIF Output: SPDIF Off, SPDIF/RAW, SPDIF/PCM.
5. SPDIF Off: Turn off the SPDIF output.
6. SPDIF/RAW: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver.
7. SPDIF/PCM: Only if your receiver is not capable of decoding multi-channel audio.
8. Dolby Digital: The options included in Dolby Digital
9. Setup are: ‘Dual Mono’ and ‘Dynamic’.

Dual Mono

• Stereo: The Left mono sound will send output signals to the Left speaker and the Right mono sound will send output signals to the Right speaker.
• L-Mono: The Left mono sound will send output signals to the Left speaker and the Right speaker.
• R-Mono: The Right mono sound will send output signals to the Left speaker and the Right speaker. Mix-Mono: The Left and the Right mixed mono sound will send output signals to the Left and the Right speakers.

Dynamic

• Dynamic range compression.

Video Setup Page

• Brightness, Contrast, Hue, Saturation: setting the video quality.

Preference Page

TV Type

• Select the color system that corresponds to your TV when AV outputs. This DVD Player is compatible with both NTSC and PAL.
• PAL – Select this if the connected TV is a PAL system. It will change the video signal of an NTSC disc and output in PAL format.
• NTSC-Select this if the connected TV is an NTSC system. It will change the video signal of a PAL disc and output in NTSC format.
• Auto: Change the video signal output automatically according to the playing disk format.
• Audio: Selects a language for audio (if available).
• Subtitle: Selects a language for subtitle (if available).
• Disc Menu: Selects a language for the disc menu (if available).
• Default: Back to the factory setting.

Parameters and specifications Electronical parameters

Item                                                              Standard requirement

Power requirements| : AC 100-240 V, 50/60 Hz
Power consumption| : <12W
Operating humidity| : 5 % to 90 %

Output

| VIDEO OUT| : 1 Vp-p (750)
AUDIO OUT| : 1.4 Vrms (1 KHz, 0 dB)
Audio| : Speaker: 1WX2, Headphones output

SYSTEM

• Note: Design and specifications are subject to change without prior notice.
• Battery Parameters
• Battery Specifications:
• Output: 7.4V
• Charge/Discharge Time:
• Standard charge time: 3h ~ 4h

Storage and work circumstances:

1. Storage circumstances Temperature Humidity
   • 6 months – 20°C~+45°C 65±20%
   • 1 week – 20°C~+45°C 65±20%
2. Work circumstances Temperature Humidity
   • Standard charge C~+45°C 65±20%
   • Standard discharge -20°C~+65°C 65±20%

First Time Installation

After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press Power button to switch receiver on. If you are using the receiver for the first time or restored to Factory Default, the Main Menu will appear on your TV screen.

1. Select [OSD Language] and press RIGHT/LEFT key to select a language.
2. Select [Country] and press RIGHT/LEFT key to select your country of residence.
3. Select [Channel Search] and press RIGHT or OK key to begin Automatic channel search.
4. Once channel tuning is complete, you are now ready to watch TV.

Basic Operation

Program Manage Settings
To access the Menu, press the SETUP button and select [Program]. The Menu provides options to adjust the Program Manage Settings. Select an option and press OK or RIGHT to adjust that setting. Press the EXIT button to exit the Menu.

Program Edit
To edit your program preferences (lock, skip, favourite, move or delete), you will need to enter the Program Edit Menu. Password not required at first use, only after lock channel, you can enter the default password ‘000000’ to access.

Set Favourite Program/s
You can create a shortlist of favorite programs that you can easily access. Set Favourite TV or Radio program:

1. Select the preferred program then press the FAVOURITE button. A heart-shaped symbol will appear and the program is marked as a favourite.
2. Repeat the previous step to select more Favourite programs.
3. To confirm and exit the Menu, press the EXIT key.

Disable Favourite TV or Radio Program:
Press the FAV buton on the Remote Control with the heart-shaped symbol. View Favourite Programs:

1. Press the Fav button and the Favourite Menu will appear.
2. Press UP/DOWN to select your Favourite Programs.
3. Press OK to select your favourite program.

Delete a TV or Radio Program/s

1. select the Program and then press the BLUE button, A message will appear. Press OK to delete the program.
2. Repeat the previous step to select more programs to delete.

Skip TV or Radio Program/s

1. Select the program you would like to skip and press the GREEN button, A skip symbol is displayed. The program is marked as a skip.
2. Repeat the previous step to select more programs.
3. To confirm and exit the menu, press EXIT key.
   • Disable a skip TV or Radio Program:
   • Press the GREEN button on the skip program with the skip symbol.

Move a TV or Radio Program/s

1. Select the preferred program then press the RED button. A moving symbol will appear.
2. Press UP/DOWN to move the program.
3. Press OK to confirm.
4. Repeat the above steps to move more channels.

Lock Program/s
You can lock selected programs for restricted view. Lock a TV or Radio Program:

1. Select the preferred program then press the YELLOW button. A lock-shaped symbol is displayed. The program is now marked as locked.
2. Repeat the previous step to select more programs.
3. To confirm and exit the menu, press the EXIT button.
4. Press the YELLOW button to disable the locked program.
5. To view the locked program, you will be required to enter either the default or the modified Password. (refer to system settings “Set Password”)

Sort

• Sort your channels from the following options:
• [LCN] – Sort the channels in ascending order.
• [Name] – Sort the channels in alphabetical order.
• [Service ID] – Sort the channels according to the station.

LCN (Logical channel number)
Set LCN on or off.

Video Setting To access the Menu, press SETUP then select [Picture]. The Menu provides options to adjust the video settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu.

Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3 Letter Box, 4:3 Full, 16:9 Wide Screen, 16:9 PillarBox or Auto to get the maximum display when watching TV.

Resolution
If the video does not appear correctly, change the setting. This setting is to match the most common setting for HDMI.

• [576i] for PAL system TV.
• [576P]: for PAL system TV.
• [720P]: for NTSC or PAL system TV.
• [10801]: for NTSC or PAL system TV.
• [1080P]: for NTSC or PAL system TV.

TV format
If the video does not appear correctly, you need to change the settings. This should match the most common setting for TVs in your country.

• [NTSC]: for NTSC system TV.
• [PAL]: for PAL system TV.

Channel Search

• To access the menu, press SETUP and select [Search Channel].
• The Menu provides options to adjust the Search Channel settings.
• Select an option and press RIGHT/LEFT to adjust the settings.
• Press EXIT to exit the Menu.

Auto-Search Search and install all channels automatically. This option overwrites all preset channels.

1. Select [Auto Search] and press OK or RIGHT to start the channel search.
2. To cancel channel search, press EXIT.

• Manual Search Install new channels manually. This option adds new channels without changing the list of the current channels.

1. Select [Manual Search] then press OK or RIGHT. The channel search screen will appear.
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels.

• If a channel is found, it is saved and added to the channels list. If channels can’t be found, then exit the menu.

• Country
  Select your country of residence.

• Antenna Power
  Supply Power to Antenna.

• Time Setting To access the Menu, press MENU then select [Time]. The Menu provides options to adjust the time settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings. Press EXIT to exit the menu.

• Time offset
  Select auto or manual for GMT offset adjustments.

• Country Region
  Country Region is set automatically when you set the country in the channel search menu. Time Zone
  Select the Time Zone Offset when [Time Offset] is set to Manual.

• Option
  To access the Menu, press SETUP and select [Option]. The menu provides options to adjust the OSD Language, Subtitle Language and Audio Language. Select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit The Menu.

• OSD Language
  Select an OSD language.

• Audio Language
  Select the preferred audio language for watching TV channels. If the language is not available, the default program language will be used.

• Subtitle Language
  Select the preferred subtitle language.

• Digital Audio
  Set the desired audio format at the HDMI slot: PCM, Raw HDIM On, Raw HDMI Off, Off (if available).

• System Setting To access the menu, press SETUP and select [System]. The menu Provides options to adjust the system settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the menu.

• Set Password
  Set or change the password for Locked programs. Enter your old password or the default password ‘000000’. You will then be asked to enter your new password. To confirm re-enter your new password. Once it is confirmed, press EXIT to exit the menu.
  Master password ‘888888’

• Restore Factory Default
  Reset your Set-Top Box to the Default Factory Settings. In Main Menu select [Restore Factory Default] and press OK or RIGHT to select. Enter your password or the default password ‘000000’ and press OK to confirm. This option will delete all preset channels and settings.
  Information
  View model, hardware, and software information.

• Software update
  Software update

• USB To access the Menu, press the SETUP button and select USB.

• Multimedia
  Switch to USB mode and plug-in USB to view files.

• Photo Configure
  Set the parameters for viewing photographs.

• Movie Configure
  Set the parameters for displaying movie subtitles.

Technical Specifications

Tuner

| ****

Input Frequency

| 170-230MHz

470-860MHz

RF Input level| -79dBm(T), -75dBm(T2)
IF Bandwidth| 7MHz and 8MHz
Modulation| QPSK, 16QAM, 64QAM, 128QAM(T2), 256QAM(T2)

Video

| ****

Decoder Format

| MPEG4 AVC/H.264 HP@L4 HEVC/H.265 HT@L4

MPEG2 MP@ML.HL

Output Format| 480i, 480p,576i, 576P, 720P, 1080i, 1080P, 4:3 and 16:9
Output Port| HDMI

Remark: The HDMI connector is only for the transmission of the TV signal to an external screen!

Troubleshooting

Screen shows “No

Signal”

| DVB-T cable not connected| Plug in the DVB-T cable
Incorrect setting| Reset setting
No sound from

speaker

| Sound on mute| Turn off mute function
Incorrect sound track| Try another sound track
Only sound, no image on the screen| No or incorrect connection with AV

cable

| Make sure cables are connected correctly
The program is a radio program| Press <TV/RADIO> key to shift into TV mode
Remote Control is not responding| The battery is exhausted| Change battery
Remote Control is not facing or

close enough to the Set Top Box

| Adjust the position of the Remote Control and

move closer to the unit

The image stopped

suddenly or mosaic

| The signal is too weak| Strengthen the signal

The remark about the reception of HD channels

the reception of HD DVB-T channels requires a better signal than normal SD quality channels. For that reason, the TV should be positioned in places where the reception quality is higher. If the reception is not strong enough, the image of HD channels can be interrupted or of bad quality.

Important remarks for the reception of the TV channels:

• The base of the antenna is magnetic; for better reception of the TV signal, if available, but the base of the antenna on a metallic surface like the bodywork of a car, a fridge, heating …
• The DVP-9413can only receive nonencrypted free TV channels.

Guarantee

• Lenee offers service and warranty in accordance with European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
  Important note : It is not possible to send products that need repairs to Lenee directly.

• Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications, and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to a particular situation. No legal rights or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for the disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

Service

For more information and helpdesk support, please visit www.lenco.com Lenee Benelux BV; Thermiekstraat la, 6361 HB, The Netherlands.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>