Lenco CR-205 FM Clock Radio with Dual Alarm User Manual

Lenco CR-205 FM Clock Radio with Dual Alarm

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for non-professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:

    • If any trouble occurs, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach!When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:

    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:

    • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

ACCESSORIES

Instruction manual x 1

LOCATION OF CONTROLS

1. Power On/Off & Alarm Off
2. Volume Down & Alarm-1
3. Volume Up & Alarm-2
4. Tuning Down & Hour
5. Tuning Up & Minute
6. Preset & Clock Set
7. Snooze & Sleep
8. PM Indicator
9. Buzzer Alarm-1 Indicator
10. Radio Alarm-1 Indicator
11. LED Clock & Radio Frequency Display
12. Sleep Indicator
13. Buzzer Alarm-2 Indicator
14. Radio Alarm-2 Indicator
15. Speaker
16. FM Antenna
17. Backup Battery Compartment
18. Power Cord AC230V~50Hz

POWER SUPPLY

1. To power the device, plug the AC power cord into the AC power input on the rear of the unit and a standard power outlet
2. To the standby mode(*LED display flashing) once collecting power

BATTERY BACKUP
Insert 2x AAA/LR6 batteries for time backup in case of a mains power failure.

Note: the clock will not work on batteries only. The batteries are only for time backup. *There is NO flashing display after power disconnect. Time and Alarm settings are reset when backup battery is empty or not installed.
SETTING THE CLOCK TIME

1. In standby mode, press and hold the Preset & Clock Set button
2. The hours will blink. Press Tuning Down & Hour Button to set the current hour.
3. Press the Tuning Up & Minute button to set the current minute.
4. Press Preset & Clock Set button once and the current time is set. *NOTE: The PM indicator will light when the hour is set in the PM

SLEEP TIMER

12:00 When listening to radio, press Snooze & Sleep button to enter sleep mode. You can just adjust the sleep timer from 10 to 90 minutes by pressing the Snooze & Sleep button The unit will automatically turn off after the selected time expires.

DISPLAY DIMMER

The display can be dimmed in 2 levels. Hi and low intensity. To change the intensity, long press the Snooze & Sleep button.

ALARM

1. In radio mode, press and hold the Power & Alarm Off button to the standby mode.
2. Press the Volume Down & Alarm-1 button or Volume Up & Alarm-2 button to Buzzer (1or 2) or Radio (1 or 2) Alarm.
3. Press the Tuning Down & Hour Button to adjust the hour.
4. Press the Tuning Up & Minute button to adjust the minute.
5. Press the Volume Down & Alarm-1 button or Volume Up & Alarm-2 button.
6. Once the set alarm time is reached, the alarm will sound.
7. To set the other alarm, follow the above steps and choose the alarm not currently set.

Cancelling the Alarm

1. Follow the instructions for setting the Alarm.
2. Press the Volume Down & Alarm-1 button or Volume Up & Alarm-2 button repeatedly until indicator will no longer lit.

When the Alarm sounds
Press Snooze & Sleep button to delay for an additional 9 minutes. The indicator will be flashing. Press Power button and then Press the Alarm button to cancel the Alarm. The Alarm indicator will be disappeared.

FM RADIO

1. Press the Power & Alarm Off button to turn the clock radio on
2. Press Tuning Down & Hour button or Tuning Up & Minute button to adjust the radio to the desired frequency.
3.  Press and hold the Tuning Down & Hour button or Tuning Up & Minute button to search for the next available frequency.
4. Press and hold the Power On/Off, Alarm Off & Source button to turn the clock radio off.

Notes: Adjust the position of the FM antenna to improve FM Radio reception.

Saving PRESET station

1. Follow the instructions for Tuning the FM Radio.
2. Tune to the desired station
3. Press and hold the Preset & Clock Set button to save the current radio station as a preset.
4. Press Tuning Down & Hour button or Tuning Up & Minute button to select the preset slot.
5. Press the Preset & Clock Set button to save the preset slot.

Tuning to a Preset Radio Station

1. Follow the instructions for Tuning the radio and saving a station as a preset.
2. Press the Preset & Clock Set button to select the preset slot to recall preset radio stations.

ENERGY SAVING
To comply with the energy saving requirement this device will automatically switch to standby mode when no music has been playing for 10 minutes.

TECHNICAL SPECIFICATIONS

• Power supply:
• AC 230 ~ 50Hz
• DC 3V 2 x 1.5V “AAA” TYPE BATTERIES
• Frequency range:
• FM 88-108 MHz
• Power consumption: 5W Max
• Audio power output: 500mW
• Dimensions (W x D x H): 155 x 54 x 70mm
• Weight: 200g

Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking

Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements. The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service
For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

References

• Lenco.com | Officiële Lenco Webshop‎
• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>