Lenco CR-07 Clock Radio with PLL FM and LED Display User Manual
- June 5, 2024
- Lenco
Table of Contents
Lenco CR-07 Clock Radio with PLL FM and LED Display
CAUTION:
Usage of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
-
Do not cover or block any ventilation openings. When placing the device ona shelf, leave 5 cm (2) free space around the whole device.
-
Install in accordance with the supplied user manual. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame.
-
The apparatus can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0″ and 35″C.
-
Avoid using the device near strong magnetic fields.
-
Electrostatic discharge can disturb normal usage or this device. it so, Simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
-
Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
-
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
-
The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, Such as vases, are placed on or near the apparatus.
-
Do not use this device when condensation may Occur. When the unit is used ina warm wet room with damp, water droplets or condensation may occur inside the unit and the unit could maybe not work properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
-
Although this device is manufactured with the utmost care and checked several times before leaving the tactory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up ot heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
-
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
-
Keep away trom rodents. Rodents enjoy Diting on power cords.
-
To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
-
The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
-
Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
-
If the unit has SB playback function, the usb memory stick should be plugged into the unit directly. Don’t use an usb extension cable because it can cause interference resulting in failing of data.
-
The ratng label has been marked on the bottom or back panel of the apparatus.
-
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or lack of experience and knowledge, unless they re under supervision or have received instructions about tne correct use of the device by the person who is responsible for their safety.
-
This product is intended for nonprofessional use only and not for commercial or industrial use.
-
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable posinon vibrations or shockS or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
-
Never remove the casing of this apparatus.
-
Never place this apparatus on other electrical equipment.
-
Do not allow children access to plastic bags.
-
Only use attachments/accessories specified by the manufacturer.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, Such as the power supply cord or the plug, When liquid has been spilled or objects have tallen int the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has Deen dropped.
-
Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing osS.
-
if the product is delivered with power cable or AC power adaptor fany trouble occur, disconnect the AC power card and refer servicing to qualified personnel.
-
completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug ot apparatus.
-
Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s
exit point. Do not place heavy items on the power adaptor, which may damage it. -
Keep the entire device out of children ‘s reach! when playing with the power cable, they can seriously injure themselves.
-
Unplug this device during lightning storms or when unused for a long period.
-
The socket outlet must be installed near the equipment and must be easily accessible.
-
Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
-
Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
-
Devices with class 2 construction do not require an earthed connection.
-
Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord.
-
This can cause a short circuit. Do not use a damaged power cord or plug or a loose outlet.
-
Doing so may result in fire or electric shock.
-
If the product contains or is delivered with a remote control containing coin / cell batteries
-
“Do not ingest battery, Chemical Burn Hazard” or equivalent working.
-
The remote control Supplied withj This product contains a coin / button cell battery is
-
Swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
-
Keep new and used batteries away trom children.
-
If the battery compartment does not close securely, stop using the product and keep it away from children.
-
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
-
Caution about the use of Batteries
-
on about the use of Batteries:
-
The danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
-
Barry cannot be subjected to high or low extreme temperatures, low air pressure at high altude during use, storage or transportaon.
-
Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
-
Disposal of a battery into fire or a hot oven, or mechanically crushing or cung of a bakery, that can result in an explosion.
-
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
-
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
-
Aenon should be drawn to the environmental aspects of baery disposal
INSTALLATION
Unpack all parts and remove protective material. Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made. Those instruction are related only to products using power cable or AC power adaptor.
- Preset Memory Selection
- Snooze Button
- Tuning- Button/Hour Button
- Time Set
- On OffiAlarm Off Button
- Sleep Button
- Tuning+ Button/Minute Button
- Volume Increase/Alarm 2 Set
- Volume Decrease/Alarm 1 Set
Radio
- Press the “ON/OFF” button to turn the clock radio on or off.
- Adjust the “TUNING+” or “TUNING-” to select the desired station.
- Press the “VOLUME+” or “VOLUME-” button to adjust the volume.+4.
- Press and hold the “PREM+ button until the preset memory display, for example “P01, is blinking. Then you can select the desired preset memory by “VOLUME” or “VOLUME” button and press PRE/M+” button again to store the desired station.
- Now you can recall the preset station by pressing the “PRE/M+ button to select the preset memory.
Setting the Alarm
- You must switch off the radio before you set the alarm time.
- Press and hold the “AL1” button until the Hour display begins to blink.
- You can set the alarm time: Press the “Hour” to adjust the hour and press “Minute” button to adjust the Minute.
- Press the “AL1” button now to store the alam time.
- Now you can enable the alarm and select to wake up by radio or bUzzer by pressing “AL1 in toggle.
- The LED with music note logo and bell logo stands for waking up by radio or by buzzer respectively. Both LEDs with music note logo and bell logo are off representing to disable the alarm.
- Use the same method to set Alarm 2.
Canceling the Daily Alarm
Press the “ON/OFF” button to stop the alarm. The alarm will operate 24 hours
later as per alarm time set.
Disabling the Alarm
Press the “AL1” or “AL2′ button in toggle until both LEDs with music note logo
and bell logo are switched off, the alarm is disabled now.
Setting the Clock
- You must switch off the radio before you set the clock time.
- Press and hold the “TIME” button until the display begins to blink, then release the button.
- Press the “HOUR” and “MIN” button to adjust the hour and minute.
- Press the “TIME” button to save time.
Setting the Sleep Time
Press the “SLEEP” button repeatedly to set the sleep time ( 90, 80, 70, 60,
50, 40, 30, 20, 10 min or OFF ). When the timer is up, the radio will be
switched off automatically.
Snooze
To use the snooze, press the “SNO0ZE Button when the alarm is sounding. The
alarm will stop temporarily, but will resume sounding after 9 minutes.
Battery Back Up
Battery back up function will operate when AC power is suspended. This back up function is only maintain the clock running in memory but cannot light up the LED display normaly. You can press any buttons to make the LED light on for checking current time. Please note the time accuracy for this DC back up function depends on the battery life time and capacity left.
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instruction, specifications and pictures in this documentation may
differ slightly from your particular situation. All items described in this
guide for illustration purposes only and may not apply to particular
situation. No legal right or entitlements may be obtained from the description
made in this manual.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Iherefore
some of the instruction, specifications and pictures in this documentation may
differ slightly from your particular situation. All items described in this
guide for illustration purposes only and may not apply to particular
situation. No legal right or entitlements may be obtained from the description
made in this manual
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should
not be disposed of as general household waste in Europe. To ensure the correct
waste treatment of the product and battery, please dispose them in accordance
to any applicable local laws of requirement for disposal of electrical
equipment or batteries. In so doing, you will help to conserve natural
resources and improve standards of environmental protection in treatment and
disposal of electrical waste (Waste Electrical and Electronic Equipment
Directive.
CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat la, 6361 HB Nuth, The Netherlands,
declares that this product is in compliance with the essential EU directive
requirements. The declaration of conformity may be consuted via
[email protected]
Service
For more information and helpdesk support, please visit www.lenco.com Lenco Benelux Bv, Thermiekstraat la, 6361 HB, Ihe Netherlands.