PHAEWO FW-H85B Foldable Electric Scooter User Manual

User Manual
Foldable Electric Scooter

Thanks for choosing our product. Have fun with this electric scooter.

The Device& Accessories

Vehicle
Accessories

Functions

The display on the handlebar will turn on after powering the kickscooter.
The display shows:

• the speed during use of the electric kickscooter; speed is shown in mph by default, but it can be switched to Km/h (1);
• the gear: maximum speed with gear 1 is around 10Km/h, the maximum speed with gear 2 is around 15Km/h and the maximum speed with gear 3 is around 25Km/h. Gears can be switched by pressing the power button. For safety reasons, the change of gear can be done when the kickscooter is stopped only (2);
• the icon for lights: front and rear lights must always be turned on during the use of the kick scooter (3);
• Bluetooth icon: not valid for this model (4);
• brake icon: it turns on when the brake lever is used (the light of the rear light will be brighter when the brake is activated) (5);
• ODO info that indicates the total mileage (this information will be kept after switching off the device) (6);
• TRP info that indicates the single driving distance after switching on (the distance info will be cleared after switching off the device) (7);
• ODO or TRP details (8);
• alarm icon for low battery (9): when all four led lights in the bottom are fully turned off, this icon turns on; it is suggested to stop, turn off the electric kickscooter, and provide for a new battery charge;
• led lights that show the battery level of charge (10): during the use of the kick scooter, the 4 LED lights are lit. During consumption of the battery, the indicators turn off, one by one. If 4 LED lights are lit, means full power. If 3 LED lights are lit, means 85-70% power. When only 1 LED light is lit, there is a charge of around 10-15%.

Assembling the device

1. fixing the steering rod and

2. Set handlebars vertical; open the parking bridge

3. hex wrench in the packing finish box to tighten the screw on the handlebar

4. Testing the power switch after assembling

Power Button

1. To turn on the scooter: Press and hold the Power Button;
2. To turn on the headlight: Press the Power Button once;
3. To switch riding mode: Press the Power Button twice.

Charging scooter

Driving Instructions

Please wear a helmet and knee pads when practicing

1. Power on and check the battery led light

2. Stand on the pedal with one leg, hit the ground with the other leg

3. Step on the other leg when the scooter is moving, then press the accelerate button (only accelerate when the scooter speed is beyond 5km/h)

4. lose the accelerate button when slowing down. Energy recovery systems will turn on by themselves to slow down. Press the left disc brake tightly if want to brake urgently.

5. lean your body left slightly to turn left, and lean your body right slightly to turn right. And turn the handlebar slowly

Safety Instructions

It is not recommended to drive in the rain
It is recommended to slightly bend knees to better adjust to a rough road. If you are traveling on a rough road, stick to a low speed (510km/h)
Entering into any room, elevator, etc.
Be careful not to be injured by a door frame.
Please do not accelerate when riding downhill
While walking with a scooter, do not press a speed knob
When driving it is recommended to go around various obstacles on

Do not place your backpacks or any other heavy objects in the handlebar area.
It is forbidden to place one foot on the running board or on the ground.

Preventing dangerous driving
It is forbidden to leave a scooter on a scooter wheel at high roadway for motor vehicles or ride in at a high speed
It is forbidden to sharply turn a residential area with a large flow of passers-by

It is forbidden to drive through puddles, which exceed the depth of 2cm.
The scooter can only hold up to one individual.

Safety Recommendations

1. Electric scooter – it is only a device for entertainment, not a vehicle. But once you drive to the public area, the electric scooter brings certain risks to your safety. For the sake of your safety and others’ safety, you must strictly follow the instructions, outlined in this driving manual.
2. You should understand that if you are riding a scooter in a public area , you must comply with all recommendations for safety. Also do not forget that there is a possibility of collision, due to violation of pedestrians or vehicles traffic rules, there is also a risk of injury, due to improper operation of the unit. As in other types of vehicles, the higher the speed of the electric scooter, the greater the braking distance. On some smooth roads, emergency braking may cause skidding of scooters, loss of balance, and even fall. Therefore, during moving on a scooter, you need to be vigilant, adhere to an appropriate speed, and keep a safe distance from pedestrians and/or other vehicles. Riding on unfamiliar terrain, keep vigilance and appropriate speed.
3. While riding a scooter, respect the rights of pedestrians. Do not scare them, especially children. Reduce speed, passing by them. If you are moving in the same direction as pedestrians, try to stick to the left side as much as possible(for right-hand traffic countries ). If you are moving in the opposite direction, stick to the right and slow down.
4. Please strictly follow your country road rules for driving, and also strictly abide by rules, set out in the instructions and safety recommendations. Violation of the above rules may result in financial expenses, personal injury, the occurrence of traffic accidents, legal disputes, conflict, and other unpleasant situations. Our company does not bear any direct or joint and several liabilities.
5. To avoid personal injury, do not loan electric scooters to others who do not know how to drive. Please spend a training before you transfer your scooter to friends, as well as teach he(her)must be wearing the proper safety gear.
6. Please inspect the scooter carefully before each use. If you find shattered parts, battery life has decreased obviously, tires leak air or there are signs of excessive wear, uncharacteristic sounds when turning or other abnormal symptoms, please discontinue use of the scooter immediately, don’t drive it reluctantly.

Fold and Transportation

Make sure the scooter is off, hold the front pole, loosen a lock lever and lower a steering rack. Add a steering rack in a horizontal position and secure it by inserting a hook through a special ring, which is located on the rear wheel mudguard. To Assemble the scooter, disconnect a steering rack lock from a hook of a mudguard, and then lift it into a vertical position and lock a lever.

Transportation
You can transfer folded scooter with one hand

Daily Maintenance and Storage

Clean and store Electric Scooter

If you find any stains on the electric scooter housing, use a soft, damp cloth to wipe the vehicle; You can use toothpaste and a toothbrush to clean the scooter from stains, and then wipe it clean with a damp cloth. If you find scratched parts, made of plastic, use sandpaper or other grinding materials for their polishing.

Warning: Do not use alcohol, petrol, kerosene, other corrosive solutions, or volatile chemical solvents to clean the vehicle. Otherwise, it will cause serious damage to the scooter body and can disrupt the structure of internal elements. Do not wash the electric scooter under strong pressure of the water, make sure the scooter is in the off status. In addition, after charging the vehicle, it is necessary to insert a plug back into a charging connector, otherwise, you may get an electric shock， or may have serious water damage caused by water falling into this hole, may have serious water damage.

If you do not use the scooter, store it in a dry, cool place, and do not leave the unit for a long time on the street. Leaving the device under the sun/in extremely high temperature/over-low temperature can cause rapid aging of the outer body and wheels of the Electric Scooter or reduce battery life.

Maintenance of Electric Scooter battery

1. Do not use batteries from other brands in order to avoid a dangerous situation;
2. Do not open or disassemble the battery to prevent electric shock. Avoid contact with metal objects to prevent an occurrence of a short circuit. Otherwise,the battery may have malfunctioned or can injure the user;
3. It is recommended to use an AC adapter, that comes in the original configuration of  the device, to prevent an occurrence of an accident or fire of the vehicle;
4. Improper disposal of used batteries and accumulators is the cause of severe environmental pollution. Please, dispose of batteries in accordance with local laws. Please do not dispose of batteries together with food waste. Protecting the environment together!
5. After each use of the device, charge the battery to prolong its service life.
   Do not store the scooter battery in rooms with temperatures, that exceed 50℃or20℃(for example, do not leave the battery of an Electric Scooter and other batteries in cars in the summertime in the hot sun), and do not leave the battery near the fire. As a result, these actions may deteriorate the battery, overheating, and can even cause inflammation.
   If within 30 days the scooter is not used, charge the battery and keep the device in a cool, dry place. Every 60 days you need to charge the battery, otherwise, there is the likelihood of its failure, which is not subject to warranty services.
   Avoid a full discharge of the device, it will extend battery life. When using the device at normal room temperature, the battery will be able to ride a much greater distance and its performance will be better; but if you use the scooter at temperatures below 0C, vehicle performance, and permeability decrease.
   At-20C a traveled distance is less, than the scooter in the normal conditions of half or even less. If a temperature rises, the traveled distance by the vehicle will also increase. You can check the remaining distance in the Application.
   Note: A fully charged scooter runs about 120-180 days of standby time. The battery has a smart chip, that stores information about its charging- discharging. If you are not charging the battery for a long time, it can cause serious damage, for which it is impossible to charge the device again. This kind of damage is not included in the free warranty service. (Caution: Do not disassemble the device by unauthorized people, as there is a risk of electric shock or serious injury as a result of a short circuit.

Adjusting a brake disc
If a brake is very tight: use an M5 hex wrench and scroll counterclockwise screws of the brake disc tensioner pulley, slightly shorten a length of a tail brake cable,then tighten a tensioner pulley. If you think that brake is too loose, loosen a tension pulley, and pull a brake cable to slightly increase the length of its tail. Tighten a tension pulley.

Adjusting a handlebars
Staggering of steering rack: using an M5 hex wrench, tighten two screws near the folding mechanism.

Using a connecting pipe to pump wheels
If a rear wheel of an Electric Scooter deflated, connect a connecting pipe to a wheel nipple to pump it . First, remove the cap of a pin, then tighten a fitting, and then you start to pump a wheel.

Met opmerkingen [ED1]:

Product parameters

Operating parameters

| Name| H85B parameters|

H85B Pro Edition

---|---|---|---
Dimensions| Length x Width x Height (mm)| 10954201145mm|
Folded: Length| 1095420495mm|
weight| Gross weight| 17kg| 17KG
Conditions| Max load| 120KG|
Age| 16-50|
Height(mm)| 1200-2000mm|
Main Parameters| Max speed(km/h)| 25|
Endurance mileage| 12-18 km
(Depending on ground, inclination, speed, and driving style)| 15-20 km
(Depending on ground, inclination, speed, and driving style)
Maximum slope((°)| 11|
Suitable area| Solid road surface, smooth clay surface to overtime, obstacles high less than 1cm, a depth of pools no more than 2cm
Operating temperature range(℃)| -10-40|
Storage temperature (℃)| -20-45|
Waterproof level| IPX4|
Battery Parameters| Rated voltages(VDC)| 36v|
Max voltage charging(VDC)| 42v|
| Rated power(Wh)| 216| 1270
| Smart battery management system| Stressinsufficient voltage, short circuit, auto sleep/wake up, overheating protectin, control of battery using
Motor Parameters| Rated power(W)| 250| 350
Power Adaptor Parameters| Rated power(W)| 54|
Rated input voltage(VAC)| 100-240V|
Rated Output voltage(VDC)| 42V|
Rated current(A)| 1.5|
Certificate| CE|
Charging time(h)| Est . 4 – 6h| Est . 6 – -8h

Presence of toxic and harmful substances

The date is provided in accordance with provisions of SJ/T 11364.
O: toxic and harmful substances in all components of the device are contained in an amount below the limit value, according to standard GB/T 26572-2011.
X: the presence of toxic and hazardous substances in at least one of the components of the device in an amount, that exceeds the threshold, according to GB/T 26572-2011

Warranty

Carefully read all instructions before using the electric kickscooter.
This product is warranted according to the local laws.
The warranty shall not apply to any products that have been subjected to misuse, negligence, accidental or abnormal conditions of operation, and does not cover the natural capacity fadeout.
Please refer to qualified and authorized people for the repair of the electric kickscooter. A non-professional repair may cause malfunction and risks and void your warranty rights.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>