Bodin 354090 Adjustable Height Stand Fan Instruction Manual

Instruction manual

22.354090.01.001
22.354091.01.001

MILIEU

**** Dit apparaat mag aan het einde van de levensduur niet bij het normale huisafval worden gedeponeerd, maar moet bij een speciaal inzamelpunt voor hergebruik van elektrische en elektronische apparaten worden aangeboden. Het symbool op het apparaat, in de gebruiksaanwijzing en op de verpakking attendeert u hierop. De in het apparaat gebruikte materialen kunnen worden gerecycled. Met het recyclen van gebruikte huishoudelijke apparaten levert u een belangrijke bijdrage aan de bescherming van ons milieu. Informeer bij uw lokale overheid naar het inzamelpunt.

SAFETY

• This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged 8 years and above and persons with reduced physical,
  sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and
  understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.

• By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

• Never move the appliance by pulling the cord and make sure the cord cannot become entangled.

• The appliance must be placed on a stable, level surface.

• The user must not leave the device unattended while it is connected to the supply.

• This appliance is only to be used for household purposes and only for the purpose, it is made for.

• To protect yourself against an electric shock, do not immerse the cord, plug, or appliance in the water or any other liquid.

• Never insert your fingers or any other object into the air outlet. Take special care to warn children of these dangers.

• Do not use the unit:
  – near a source of the fire.
  – in an area exposed to direct sunlight.
  – in an area where water is likely to splash.
  – near a bath, a shower, or a swimming pool.

• WARNING: Do not wrap the cable around the main body of the appliance during or after use.

• WARNING: Misuse of the appliance could cause personal injury.

• This appliance is intended to be used in household and similar applications such as:

• Staff kitchen areas in shops, offices, and other working environments.

•  By clients in hotels, motels, and other residential-type environments.

•  Bed and breakfast type environments.

•  Farmhouses.

Cleaning and maintenance

• Always unplug the fan before cleaning or assembly.

• Do not allow water to drip on or in the fan motor housing.

• Clean the appliance with a damp cloth.
  Never use harsh and abrasive cleaners, scouring pad,s or steel wool, which damages the device.

• Never immerse the electrical device in water or any other liquid.

• Ensure that the fan is switched off from the supply mains before removing the guard.

PARTS DESCRIPTION

Name of parts

Remote control

Control panel

BEFORE THE FIRST USE

• Take the appliance and accessories out of the box. Remove the stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable parts with a damp cloth. Never use abrasive products.
• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50Hz).

How to assemble
Installing the base

1. Remove the nut from the stand, and insert the stand into the base.

2. Tighten the nut from the bottom of the base to secure the stand to the base.

3. Tighten the nut securely, not to be loosened.
   Installing the rearguard

4. Remove the guard stopper nut, cap, and Blade nut. Fix the rear guard to the motor.

5. Tighten the guard stopper nut securely.
   Installing the blade

6. Insert the blade into the motor shaft closely.

7. Tighten the blade with a blade nut.
   Installing the front guard

8. Align the hook of the front guard with the marked spot at the top of the rearguard, then insert the wire rod. Match front and rear guards, insert in
   order from top to bottom (all the way around). Engage the clip to fix
   the front and rear guard as shown in the figure and fix it with a screw.

How to adjust the height of the slide pipe
Press the height adjustment button to release the lock and enable to adjustment of the height of the slide pipe.
Attention:

• Make sure to fix the slide pipe before carrying.
• When you have difficulty in raising up the slide pipe or pressing the height adjustment button, once pushed down the pipe, then press the button and raise the pipe.

How to adjust the vertical wind direction by hand

• Adjust to the desired angle by grasping the main body, holding the handle, and oscillating up and down.

USE

• Press the on/off key to activate the fan.
• Press the oscillation key to activate or deactivate the swing function.
•  Press the speed key to choose the desired speed (total 6-speed levels).
•  Press the mode key to select one of three different wind types.
• When the fan is on, press the timer key to set the desired shut downtime 0.5-7.5 hours. In standby mode, you can pre-set the fan to start in 0.5-7.5 hours.
• Press the light button on the remote control to adjust the brightness of the indicator light or turn off the indicator light.

© Copyright 2019
Smartwares Jules Verneweg 87
5015 BH Tilburg
The Netherlands

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>