Spatter B07X8GSP1M Foldable Bathtub User Manual

Spatter B07X8GSP1M Foldable Bathtub

INSTRUCTIONS

1. When used in cold environments, please soak in warm water for 2-3 minutes.
2. When you use the product for the first time, please wash the product with warm water. Do not use a corrosive detergent to clean the product.
3. Never start filling the tub with hot water only (max 50 degrees Celsius). Adjust the water to the proper temperature. The water level is filled according to individual needs, and the maximum can not exceed two-thirds.
4. For the first time, the product will have
   • slight plastic smell, which is normal The odor will slowly dissipate over time. We use non-toxic materials; the use of the bathtub is completely safe.
5. The temperature of the bath is generally between 38 and 42 degrees Celsius. The best time for each bath is 15-20 minutes.
6. Please drain the water of the product after use, please do not allow the product to store water for a long time, otherwise, the product will be deformed.
7. When using the product, please do not directly expose the product to hot water above 50 degrees Celsius.

Installation

1. Unfold the bathtub
2. Insert the six plastic tubes.
3. Inflate the air ring. When inflating use a large inflatable head to inflate. When deflating, insert the tail of the aircap into the air nozzle. Holding up air flake, hearing air flow is OK.
4. Complete.

1. Unfold the bathtub
2. Insert the six plastic tubes.
3. Insert and connect three plastic tubes.
4. Connect the tube heads by the joint.
5. Complete.

Folding

1. Fold the bottom half of the tube inward.
2. Fold the sides of the tub twice inwards.
3. Fold the sides of the tub twice inwards.
4. Fold the sides inward completely.

1. Fold the tub along the mouth.
2. Fold the bottom half of the tub inward.
3. Fold the sides of the tub inward.
4. Fold the sides inward completely.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>